• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.6-9
• /
• 2011

In this study, the two-phase incompressible flow in two-dimensional channel considering the effect of surface tension is simulated using an improved level-set method. Quadratic element is used for solving the continuity and Navier-Stokes equations to avoid using an additional pressure equation, and Crank-Nicholson scheme and linear element are used for solving the advection equation of the level set function. Direct approach method using geometric information is implemented instead of the hyperbolic-type partial differential equation for the reinitializing the level set function. The benchmark test case considers various arrays of defomable droplets under different flow conditions in straight channel. The deformation and migration of the droplets are computed and the results are compared very well with the existing studies.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.345-349
• /
• 2003

The dynamic behavior of CANDU nuclear fuel channel was analyzed by the use of 3-dimensional finite element method, under the various fault conditions such as a fault in the end fitting support and the removal/migration of the garter spring in the fuel channel, in order to predict the dynamic behavior for a degraded symptoms of CANDU nuclear fuel channel. Moreover, the frequency response analysis for possible fault conditions was also peformed considering the effects of the pressure tube vibration and flow-induced vibration by the coolant flow. From the analysis of the frequency responses, defects in the garter spring have influenced the changes of 2nd and 3rd modes and all the important modes are varied for the failure in the journal bearing in the end fitting body.

• 한국해양학회지
• /
• 제30권2호
• /
• pp.116-124
• /
• 1995

PC기반의 디지털 탄성과 시스템에 다중채널 수진기(6채널)를 연결하여 천해져 탄 성과 반사법 자료를 취득하고 이를 P에서 전산처리하였다. 자료처리 내용은 전처리, 너울효과보정, 주파수필터링, 이득회수, 디콘볼루션, 종합, 구조보정, 단면도작성 등 이다. 이러한 다중채널 디지털 자료취득 및 처리를 거친 최종 단면을 종래의 아날로그 기록계의 단면과 비교해 본 결과 다중반사를 포함하는 잡음이 제거 혹은 억제되고 신 호는 강화되었으며 해상도 또한 향상되었다. 종래의 아날로그 탄성과 장비에 결합하여 사용하는 천해저 다중채널 디지털 탄성과 시스템 및 자료처리 소프트웨어는 경제성이 높고, 아날로그 시스템에 비해 현장작업이 용이하면서도 양질의 지질정보를 효율적으 로 획득하게 해준다.

• BioChip Journal
• /
• 제12권4호
• /
• pp.257-267
• /
• 2018

Inertial microfluidics has attracted significant attention in recent years due to its superior benefits of high throughput, precise control, simplicity, and low cost. Many inertial microfluidic applications have been demonstrated for physiological sample processing, clinical diagnostics, and environmental monitoring and cleanup. In this review, we discuss the fundamental mechanisms and principles of inertial migration and Dean flow, which are the basis of inertial microfluidics, and provide basic scaling laws for designing the inertial microfluidic devices. This will allow end-users with diverse backgrounds to more easily take advantage of the inertial microfluidic technologies in a wide range of applications. A variety of recent applications are also classified according to the structure of the microchannel: straight channels and curved channels. Finally, several future perspectives of employing fluid inertia in microfluidic-based cell sorting are discussed. Inertial microfluidics is still expected to be promising in the near future with more novel designs using various shapes of cross section, sheath flows with different viscosities, or technologies that target micron and submicron bioparticles.

• East Asian Economic Review
• /
• 제23권3호
• /
• pp.227-260
• /
• 2019

This paper offers a comprehensive view of international risk sharing and of related policy issues from the perspective of the European Union. The traditional analyses contemplate three risk-sharing channels: the capital markets channel (through cross border portfolio investments), international transfers and the credit markets channel (via savings). Comparative analyses reveal that, on average, about 80% of the shock remains unsmoothed in Europe while only about 18% of the shock is transmitted to consumers within the US. From aggregated figures, there is space for improving, particularly, the cross-border investments channel in Europe. In this sense, the completion of the Banking and Capital Markets Union are expected to boost risk sharing across European member states. We also review new additional issues usually not contemplated by the traditional literature as depreciation, migration and the role of sovereigns and two new additional channels recently considered in the literature: government consumption and the real exchange rate. Finally, we also examine recent analysis related to the geographic distribution of risk sharing.

• 한국석유지질학회지
• /
• 제10권1_2호
• /
• pp.23-33
• /
• 2004

칠레 남부에 분포하는 라고 소피아 역암 (후기 백악기)은 이암이 우세한 심해 퇴적층 (Cerro Toro Formation) 내에 렌즈상으로 산출하고 남북방향으로 120 km 이상 연장된다. 라고 소피아 역암은 융기대전면분지 (foreiand basin)인 마젤란 분지의 융기대전면곡분 (foredeep trough)을 따라 발달한 심해저 하도계 퇴적층으로 해석된다. 이처럼 연장이 대단히 좋은 역질의 심해저 하도가 발달하는 것은 현생 심해저 환경에서 매우 드문 현상으로 라고 소피아 역암은 퇴적학적으로 매우 흥미로운 예이다. 연구지역의 북부에 분포하는 라고 소피아 역암은 이암 퇴적층 사이에 협재하는 3-5매의 역암체로 구성되고, 고수류 측정에 따르면 퇴적물은 동, 남, 남동 방향으로 운반된 것으로 유추된다. 이 역암체는 융기대전면곡분의 서편에 위치한 해저사면을 따라 발달한 심해저 하도계의 지류에서 퇴적된 것으로 해석되며, 지류들은 남북방향의 주하도로 수렴하였을 것으로 추정된다. 남부 지역의 라고 소피아 역암은 300 m 이상의 두께를 가지는 역암체로 구성되고, 남북방향으로 긴 융기대전면분지의 축을 따라 발달한 주하도에서 퇴적된 것으로 해석된다. 이 역암체는 층리를 보이는 역암, 괴상 혹은 점이층리의 역암, 기질지지 역암으로 구성되며, 각각은 저탁류에 의한 밑짐 운반, 고밀도 저탁류, 니질 암설류에 의해 퇴적된 것으로 해석된다. 층리역암에서 측정된 고수류 방향은 남남서항으로 주하도의 방향을 지시한다. 반면, 북부 및 남부 지역의 기질지지 역암에서 측정된 고수류 방향은 흔히 하도 방향에 대해 고각도를 이루는데, 이는 하도의 둑 또는 주변 사면이 붕괴하여 니질 암설류가 형성되었음을 지시한다. 형태구성 (architecture) 분석 결과, 라고 소피아 역암은 육상의 역질 망상하천 퇴적층과 유사한 구성요소로 구성되며, 라고 소피아 심해저 하도계는 망상하천과 유사한 지형적 특성을 지녔을 것으로 추정된다. 또한 하도 역암 내 큰 규모의 층구조는 동쪽으로 이동 누적된 특징을 보이는데, 이는 지구조 운동에 의해 주하도가 점진적으로 동쪽으로 이동하였을 가능성을 시사한다.

• Ecology and Resilient Infrastructure
• /
• 제3권1호
• /
• pp.8-13
• /
• 2016

본 연구에서는 수제의 길이 변화에 의하여 교호사주의 형성, 사주의 이동과 정지, 사주의 파장에 미치는 영향을 실내실험을 통하여 분석하였다. 수제의 길이가 길어질수록 사주의 이동거리와 파장은 짧아지고, 이동속도는 감소하였다. 수제의 길이가 길수록 사주에 작용하는 강제효과가 강하게 작용하였다. 사주의 파고는 수제의 길이 변화에 크게 영향을 받지 않으며, 거의 일정하게 유지되었다. 그러나 사주의 파장이 감소하면 사주의 이동속도는 증가하며, 사주의 파장과 사주의 이동속도는 반비례 관계를 형성하였다.

• Ocean and Polar Research
• /
• 제24권3호
• /
• pp.189-196
• /
• 2002

A multichannel seismic survey was conducted in the southern Ayu Trough which is the only spreading boundary between the Philippine Sea and Caroline plates. The seismic system used in this study comprises of 2.46-l sleeve gun and a 12-channel streamer with a group interval of 6.25m. Migration technique was used to analyze seismic velocity, and poststack depth migration was applied to the stacked data. The sediment thickness obtained from the depth section tends to increase with distance from the spreading axis. Sedimentation rates are poorly constrainted in the study area. The apparent half-spreading rates estimated from the sediment thickness and sedimentation rate from DSDP hole on the caroline plate are 4.7mm/yr and 7.9mm/yr at $1^{\circ}24'N\;and\;0^{\circ}42'N$, respectively, which are fester than Previously suggested. On the basis of new oblique spreading geometry, the recalculated spreading rates are 5.4mm/yr and 9.1mm/yr at $1^{\circ}24'N\;and\;0^{\circ}42'N$, respectively. Seismic sections show that the topography is asymmetric across the Ayu Trough and the acoustic basement is rough. These features are consistent with the earlier suggestion that the Ayu Trough is a slow-spreading divergent boundary. A detailed examination of seismic profiles away from the axis shows that sediments can be divided into two layers which implies a possible change in the spreading rate anuor sedimentation condition during the formation of the trough.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2005년도 추계학술대회 논문집
• /
• pp.85-88
• /
• 2005

Experimental study has been conducted to evaluate characteristics of particle laden flows at the ratio of channel diameter to particle diameter (B = 14.9, 21.6 and 55). Particle velocities and radial concentrations are obtained using a microscope Nd:YAG laser and cooled CCD camera. Results show that there are relative velocities between the fluid and the particles at B = 14.9. It is also observed that the particles are accumulated at r=$0.5\∼0.82R$, with R being tile tube radius, and particle migration occurs at small Reynolds number, by comparing with the results obtained in macro scale. This gives optimal factors for designing microfluidic channels for cell or Particle separation, particle focusing, and so on.

• Ocean and Polar Research
• /
• 제26권3호
• /
• pp.385-400
• /
• 2004

The Lago Sofia Conglomerate encased in the 2km thick hemipelagic mudstones and thinbedded turbidites of the Cretaceous Cerro Toro Formation, southern Chile, is a deposit of a gigantic submarine channel developed along a foredeep trough. It is hundreds of meters thick kilometers wide, and extends for more than 120km from north to south, representing one of the largest ancient submarine channels in the world. The channel deposits consist of four major facies, including stratified conglomerates (Facies A), massive or graded conglomerates (Facies B), normally graded conglomerates with intraformational megaclasts (Facies C), and thick-bedded massive sandstones (Facies D). Conglomerates of Facies A and B show laterally inclined stratification, foreset stratification, and hollow-fill structures, reminiscent of terrestrial fluvial deposits and are suggestive of highly competent gravelly turbidity currents. Facies C conglomerates are interpreted as deposits of composite or multiphase debris flows associated with preceding hyperconcentrated flows. Facies D sandstones indicate rapidly dissipating, sand-rich turbidity currents. The Lago Sofia Conglomerate occurs as isolated channel-fill bodies in the northern part of the study area, generally less than 100m thick, composed mainly of Facies C conglomerates and intercalated between much thicker fine-grained deposits. Paleocurrent data indicate sediment transport to the east and southeast. They are interpreted to represent tributaries of a larger submarine channel system, which joined to form a trunk channel to the south. The conglomerate in the southern part is more than 300 m thick, composed of subequal proportions of Facies A, B, and C conglomerates, and overlain by hundreds of m-thick turbidite sandstones (Facies D) with scarce intervening fine-grained deposits. It is interpreted as vertically stacked and interconnected channel bodies formed by a trunk channel confined along the axis of the foredeep trough. The channel bodies in the southern part are classified into 5 architectural elements on the basis of large-scale bed geometry and sedimentary facies: (1) stacked sheets, indicative of bedload deposition by turbidity currents and typical of broad gravel bars in terrestrial gravelly braided rivers, (2) laterally-inclined strata, suggestive of lateral accretion with respect to paleocurrent direction and related to spiral flows in curved channel segments around bars, (3) foreset strata, interpreted as the deposits of targe gravel dunes that have migrated downstream under quasi-steady turbidity currents, (4) hollow fills, which are filling thalwegs, minor channels, and local scours, and (5) mass-flow deposits of Facies C. The stacked sheets, laterally inclined strata, and hollow fills are laterally transitional to one another, reflecting juxtaposed geomorphic units of deep-sea channel systems. It is noticeable that the channel bodies in the southern part are of feet stacked toward the east, indicating eastward migration of the channel thalwegs. The laterally inclined strata also dip dominantly to the east. These features suggest that the trunk channel of the Lago Sofia submarine channel system gradually migrated eastward. The eastward channel migration is Interpreted to be due to tectonic forcing imposed by the subduction of an oceanic plate beneath the Andean Cordillera just to the west of the Lago Sofia submarine channel.