• The Journal of the Acoustical Society of Korea
• /
• v.21 no.4
• /
• pp.394-400
• /
• 2002

In digital speech communications, the quality of service can be increased by speech coding scheme that is adaptive to the error rate of voice packet transmission. However, current communication protocol in cellular and internet communications does not provide the function that transmits the channel error information. To solute this problem, in this paper, new method for real-time transmission of channel error information is proposed, where channel error information is embedded in voice packet. The proposed method utilizes the pulse positions of codevector in ACELP speech codec, which results in little degradation in speech quality and low false alarm rate. The simulations with various speech data show that the proposed method meets the requirement in speech quality, detection rate, and false alarm rate.

• Journal of information and communication convergence engineering
• /
• v.8 no.3
• /
• pp.281-288
• /
• 2010

This paper investigates the performance of IEEE 802.11p wireless access in vehicular environments (WAVE) system in small-scale fading models reported by Georgia Institute of Technology (Georgia Tech). We redesign the small-scale fading models to be applied to the computer simulation and develop the IEEE 802.11p WAVE physical layer simulator to provide the bit error rate and packet error rate performances. Moreover, a new channel estimator using decision directed channel estimation and linear minimum mean square error smoothing is proposed in order to improve the performance of the conventional least square channel estimator using two identical long training symbols. The simulation results are satisfactorily coincident with the scenarios of Georgia Tech report, and the proposed channel estimator significantly outperforms the conventional channel estimator.

• Journal of Korea Multimedia Society
• /
• v.5 no.2
• /
• pp.198-205
• /
• 2002

Most studies of the ARQ schemes are conducted under the limited error rate of a fairly stationary channel. In nonstationary channel, error rates vary considerably and variety of error rate is wide. This paper proposes an effective Stop-and-Wait ARQ scheme which estimates the channel state in a simple manner based on the received acknowledgement messages, and can adaptively switch its operation mode in a channel where error rates vary slowly. It provides higher throughput than other comparable Stop-and-Wait ARQ schemes under a wide variety of error rate conditions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.6
• /
• pp.1546-1553
• /
• 1996

The bit error probability of RS/trellis concatenated coded-modualtion system in the mobile radio channel is analyzed. A new upper bound to the symbol error probability of the inner TCM in the mobile radio channel is obtained by exploiting the unequal symbol error probability of the TCM. This bound is applied to the derivation of the upper bound to the bit error probability of the concatenated coded-modulation system. An efficient way of searching distance spectrum of the TCM in mobile radio channel is devised. Our new bounds are tighter than the earlier studied other bounds.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.10
• /
• pp.15-23
• /
• 2016

To support the telematics and infotainment services, vehicle-to-everything (V2X) communication requires a robust and reliable network. To do this, the 3rd Generation Partnership Project (3GPP) has recently developed V2X communication. For reliable communication, accurate channel estimation should be done. However, because vehicle speed is very fast, radio channel is rapidly changed with time. Therefore, it is difficult to accurately estimate the channel. In this paper, we propose the new linear minimum mean square error (LMMSE) channel interpolation scheme based on the Long Term Evolution (LTE) sidelink system in vehicle-to-vehicle (V2V) environments. In our proposed reduced decision error (RDE) channel estimation scheme, LMMSE channel estimation is applied in the pilot symbol, and then in the data symbol, smoothing and LMMSE channel interpolation scheme is applied. After that, time and frequency domain averaging are applied to obtain the whole channel frequency response. In addition, the LMMSE equalizer of the receiver side can reduce the error propagation due to the decision error. Therefore, it is possible to detect the reliable data. Analysis and simulation results demonstrate that the proposed scheme outperforms currently conventional schemes in normalized mean square error (NMSE) and bit error rate (BER).

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.179-181
• /
• 2005

There is asymmetric in horizontal and vertical side of PDP cell. Every vertical line has BM(Black Mask) to improve luminance contrast. When error diffusion is processed in PDP system, these problems make an error bigger. In 4 inch PDP system, every red, green, blue color of test pattern is presented and each luminance is measured. That is called horizontal(H), diagonal right(R), diagonal left(L) and vertical(V). In red channel, high luminance descending order is V-H-R-L. In green channel, V-H-L-R. In blue channel, V-M-R=L. After average luminance of each direction is calculated. new weighted error diffusion(Weighted ED) is proposed. In digital image signal processing, the error in weighted ED is differ from ED's. The image of weighted ED is more less error compare to conventional ED and close to original image. As the gray level linearity and big size panel is adopted, weighted ED could produce good image.

• ETRI Journal
• /
• v.29 no.5
• /
• pp.596-606
• /
• 2007

It is well known that an OFDM receiver is vulnerable to synchronization errors. Despite fine estimations used in the initial acquisition, there are still residual synchronization errors. Though these errors are very small, they severely degrade the bit error rate (BER) performance. In this paper, we propose a residual error elimination scheme for the digital OFDM baseband receiver aiming to improve the overall BER performance. Three improvements on existing schemes are made: a pilot-aided recursive algorithm for joint estimation of the residual carrier frequency and sampling time offsets; a delay-based timing error correction technique, which smoothly adjusts the incoming data stream without resampling disturbance; and a decision-directed channel gain update algorithm based on recursive least-squares criterion, which offers faster convergence and smaller error than the least-mean-squares algorithms. Simulation results show that the proposed scheme works well in the multipath channel, and its performance is close to that of an OFDM system with perfect synchronization parameters.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.5
• /
• pp.473-481
• /
• 1988

In this paper, we investigated bit error probabilities of GMSK, which is known to be one of promising modulation techniques for a digital mobile radio, under various mobile radio environments.: AWGN, slow Rayleigh fading channel, co-channel interference and adjacent channel interference. We employed an MSK-type receiver for a coherent detection and assumed degrading to both signals than adjacent channel interference. Especially, it is found that GMSK suffers more degradations than MSK from the co-channel interference. But with a high power adjacent channel interference, GMSK shows less bit error rate than MSK. The results confirm a higher spectrum efficiency of GMSK.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.869-872
• /
• 2001

Blind identification and equalization of communication channel is important because it does not need training sequence, nor does it require a priori channel information. So, we can increase the bandwidth efficiency. The linear prediction error method is perhaps the most attractive in practice due to the insensitive to blind channel estimator and equalizer length mismatch as well as for its simple adaptive algorithms. In this paper, we propose method for fractionally spaced blind equalizer with arbitrary delay using one-step forward prediction error filter from second-order statistics of the received signals for SIMO channel. Our algorithm utilizes the forward prediction error as training sequences for data estimation and desired signal for channel estimation.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.4
• /
• pp.1593-1599
• /
• 2017

This paper presents a multi-channel light-emitting diode (LED) driver IC with a current-mode current regulator. The proposed current regulator replaces resistors for current sensing with a sequentially controlled single current sensor and a single regulation loop for sensing and regulating all LED channel currents. This minimizes the current mismatch among the LED channels and increases voltage headroom or, equivalently, power efficiency. The proposed LED driver IC was fabricated in a $0.35-{\mu}m$ BCD 60-V high voltage process, and the chip area is $1.06mm^2$. The measured maximum power efficiency is 93.4 % from a 12-V input, and the inter-channel current error is smaller than as low as ${\pm}1.3%$ in overall operating region.