• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.3C
• /
• pp.279-285
• /
• 2003

In this paper we propose a blind decision feedback equalizer (DFE) that is characterized by the fact that it does not require channel estimation. Because the output of the optimized multistep prediction error filter (PEF) can be represented as a product of the channel partial impulse response and the transmitted sequence, a backward multistep PEF can be used as the blind DFE feedforward filter (FFF). The corresponding feedback filter (FBF) is obtained from the symbol -rate partial channel impulse response. The proposed algorithm has several advantages over existing blind channel estimation techniques, including stable performance without the necessity of exact channel order estimation.

• International Journal of Computer Science & Network Security
• /
• v.23 no.10
• /
• pp.1-10
• /
• 2023

This paper proposes a method to extend Inter-Carrier Interference (ICI) canceling Orthogonal Frequency Division Multiplexing (OFDM) receivers for 5G mobile systems to spatial multiplexing 2×2 MIMO (Multiple Input Multiple Output) systems to support high-speed ground transportation services by linear motor cars traveling at 500 km/h. In Japan, linear-motor high-speed ground transportation service is scheduled to begin in 2027. To expand the coverage area of base stations, 5G mobile systems in high-speed moving trains will have multiple base station antennas transmitting the same downlink (DL) signal, forming an expanded cell size along the train rails. 5G terminals in a fast-moving train can cause the forward and backward antenna signals to be Doppler-shifted in opposite directions, so the receiver in the train may have trouble estimating the exact channel transfer function (CTF) for demodulation. A receiver in such high-speed train sees the transmission channel which is composed of multiple Doppler-shifted propagation paths. Then, a loss of sub-carrier orthogonality due to Doppler-spread channels causes ICI. The ICI Canceller is realized by the following three steps. First, using the Demodulation Reference Symbol (DMRS) pilot signals, it analyzes three parameters such as attenuation, relative delay, and Doppler-shift of each multi-path component. Secondly, based on the sets of three parameters, Channel Transfer Function (CTF) of sender sub-carrier number n to receiver sub-carrier number l is generated. In case of n≠l, the CTF corresponds to ICI factor. Thirdly, since ICI factor is obtained, by applying ICI reverse operation by Multi-Tap Equalizer, ICI canceling can be realized. ICI canceling performance has been simulated assuming severe channel condition such as 500 km/h, 8 path reverse Doppler Shift for QPSK, 16QAM, 64QAM and 256QAM modulations. In particular, 2×2MIMO QPSK and 16QAM modulation schemes, BER (Bit Error Rate) improvement was observed when the number of taps in the multi-tap equalizer was set to 31 or more taps, at a moving speed of 500 km/h and in an 8-pass reverse doppler shift environment.

• ETRI Journal
• /
• v.4 no.3
• /
• pp.18-29
• /
• 1982

In a block adaptive filtering procedure, the filter coefficients are adjusted once per each output block while maintaining performance comparable to that of widely used LMS adaptive filtering in which the filter coefficients are adjusted once per each output data sample. An efficient implementation of block adaptive filter is possible by means of discrete transform technique which has cyclic convolution property and fast algorithms. In this paper, the block adaptive filtering using Fermat Number Transform (FNT) is investigated to exploit the computational efficiency and less quantization effect on the performance compared with finite precision FFT realization. And this has been verified by computer simulation for several applications including adaptive channel equalizer and system identification.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.3-5
• /
• 2007

This paper presents decision feedback equalizers using a recurrent neural network trained algorithm using extended Kalman filter(EKF) and sigma-point Kalman filter(SPKF). EKF is propagated, analytically through the first-order linearization of the nonlinear system. This can introduce large errors in the true posterior mean and covariance of the Gaussian random variable. The SPKF addresses this problem by using a deterministic sampling approach. The features of the proposed recurrent neural equalizer And we investigate the bit error rate(BER) between EKF and SPKF.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.147-147
• /
• 2000

Recently, a considerable amount of attention is being given to the use of wavelets and neural network for modulation and equalization. We proposed a new scheme of equalization for constellation using discrete wavelet transform(DWT) and neural network. The DWT is used for noise reduction and the neural network is used to update the equalizer coefficients adaptively.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.9-12
• /
• 2002

In this paper, we analyze high-rate wireless LAN system based on Orthogonal Frequency Division Multiplexing(OFBM) transmission method. For this analysis, actual channcl measurement model of indoor office areas such as JTC model was adopted, and cllanncl coding of IEEE 502.11 and channel equalizer over multipath environment are also considered.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.11a
• /
• pp.228-228
• /
• 2004

• Journal of Korea Multimedia Society
• /
• v.10 no.10
• /
• pp.1284-1294
• /
• 2007

In this paper, a blind nonlinear channel equalization is implemented by using a Modified Fuzzy C-Means (MFCM) algorithm. The proposed MFCM searches the optimal channel output states of a nonlinear channel from the received symbols, based on the Bayesian likelihood fitness function instead of a conventional Euclidean distance measure. Next, the desired channel states of a nonlinear channel are constructed with the elements of estimated channel output states, and placed at the center of a Radial Basis Function (RBF) equalizer to reconstruct transmitted symbols. In the simulations, binary signals are generated at random with Gaussian noise. The performance of the proposed method is compared with that of a hybrid genetic algorithm (GA merged with simulated annealing (SA): GASA), and the relatively high accuracy and fast searching speed are achieved.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2007.05a
• /
• pp.382-388
• /
• 2007

In this paper, a modified Fuzzy C-Means (MFCM) algorithm is presented for nonlinear blind channel equalization. The proposed MFCM searches the optimal channel output states of a nonlinear channel from the received symbols, based on the Bayesian likelihood fitness function instead of a conventional Euclidean distance measure. Next, the desired channel states of a nonlinear channel are constructed with the elements of estimated channel output states, and placed at the center of a Radial Basis Function (RBF) equalizer to reconstruct transmitted symbols. In the simulations, binary signals are generated at random with Gaussian noise. The performance of the proposed method is compared with that of a hybrid genetic algorithm (GA merged with simulated annealing (SA): GASA), and the relatively high accuracy and fast searching speed are achieved.

• International Journal of Contents
• /
• v.2 no.4
• /
• pp.19-24
• /
• 2006

In this paper, the performance of pre-equalization technique which can be applicable for the B-WLL uplink is evaluated and compared to post-equalization technique under three kinds of rain attenuation channels such as rain, intermittent light rain and thundershower. The BER performance comparisons of two algorithms (LMS and RLS) are investigated in the context of channel models and the length of training sequence. From the simulation results, it is shown that the post-equalization outperforms only at quite good channel conditions such as AWGN, while the pre-equalization can guarantee better BER performance at every channel conditions, especially performance gain increases as the severity of channel increases. It is concluded that the pre-equalizer using LMS algorithm is preferable at delay-tolerant situation where the complexity of algorithm is not a strict factor, while one using RLS is suitable for fast burst transmission with a relatively short training sequence.