• Journal of Aerospace System Engineering
• /
• v.14 no.5
• /
• pp.33-41
• /
• 2020

The landing gear of an aircraft is a device that absorbs and dissipates shock energy transmitted from the ground to the fuselage. Among the landing gears, the semi-active MR damper landing gear is supposed to show high-shock absorption efficiency under various landing conditions and secure the stability when out of control. In the case of the MR damper landing gear using an annular channel rather than orifice, Amesim, a commercial multi-physics program, is considered as more useful than the conventional two-degree-of-freedom model because the damping force generated by the pressure drop through the flow annular path can cause cavitation in the low-pressure chamber of the MR damper with a specific internal structure. In this paper, the main dynamic characteristics of the MR damper landing gear with an annular type flow path structure has been analyzed under the condition of cavitation. Based on the analysis results using Amesim, a design guideline for the MR damper flow path that prevents cavitation has been proposed based on the modification of the arrangement of internal components of the damper. The guideline was verified through a drop simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.777-781
• /
• 2004

This paper presents an algorithm for multichannel slotted-ring topology medium access protocol (MAC) using in wavelength division multiplexing (WDM) networks. In multichannel ring, there are two main previously proposed architectures: Tunable Transmitter - Fixed Receiver (TTFR) and Fixed Transmitter - Tunable Receivers (FTTR). With TTFR, nodes can only receive packets on a fixed wavelength and can send packets on any wavelengths related to destination of packets. Disadvantage of this architecture is required as many wavelengths as there are nodes in the network. This is clearly a scalability limitation. In contrast, FTTR architecture has advantage that the number of nodes can be much larger than the number of wavelength. Source nodes send packet on a fixed channel (or wavelength) and destination nodes can received packets on any wavelength. If there are fewer wavelengths than there are nodes in the network, the nodes will also have to share all the wavelengths available for transmission. However the fixed wavelength approach of TTFR and FTTR bring low network utilization. Because source node with waiting data have to wait for an incoming empty slot on corresponding wavelength. Therefore this paper presents Tunable Transmitter - Tunable Receiver (TTTR) approach, in which the transmitting node can send a packet over any wavelengths and the receiving node can receive a packet from any wavelengths. Moreover, the self-similar distributed input traffic is used for evaluation of the performance of the proposed algorithm. The self-similar traffic performs better performance over long duration than short duration of the Poison distribution. In order to increase bandwidth efficiency, the Destination Stripping approach is used to mark the slot which has already reached the desired destination as an empty slot immediately at the destination node, so the slot does not need to go back to the source node to be marked as an empty slot as in the Source Stripping approach. MATLAB simulator is used to evaluate performance of FTTR, TTFR, and TTTR over 4 and 16 nodes ring network. From the simulation result, it is clear that the proposed algorithm overcomes higher network utilization and average throughput per node, and reduces the average queuing delay. With future works, mathematical analysis of those algorithms will be the main research topic.

• Journal of KIISE:Software and Applications
• /
• v.36 no.6
• /
• pp.471-478
• /
• 2009

Recently, researches for user interface are remarkably processed due to the explosive growth of 3-dimensional contents and applications, and the spread class of computer user. This paper proposes a novel method to manipulate windows efficiently using only the intuitive motion of hand. Previous methods have some drawbacks such as burden of expensive device, high complexity of gesture recognition, assistance of additional information using marker, and so on. To improve the defects, we propose a novel visual touchless interface. First, we detect hand region using hue channel in HSV color space to control window using hand. The distance transform method is applied to detect centroid of hand and curvature of hand contour is used to determine position of fingertips. Finally, by using the hand motion information, we recognize hand gesture as one of predefined seven motions. Recognized hand gesture is to be a command to control window. In the proposed method, user can manipulate windows with sense of depth in the real environment because the method adopts stereo camera. Intuitive manipulation is also available because the proposed method supports visual touch for the virtual object, which user want to manipulate, only using simple motions of hand. Finally, the efficiency of the proposed method is verified via an application based on our proposed interface.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.2 s.344
• /
• pp.27-38
• /
• 2006

When an RFID reader attempts to read tags, interference might occur if the neighboring readers also attempt to communicate with the same tag at the same time or the neighboring readers use the same frequency at the same time. These interferences cause the RFID reader collision. When the RFID reader collision occirs, either the command from the reader can not be transmitted to the tags or the response from the tags can not be received by the reader correctly. RFID reader anti-collision algorithms have been developed to reduce it. One of the best blown reader anti-collision algorithms is the Colorwave algorithm proposed by MIT. The Colorwave algorithm reduces the reader collisions by having the readers operate at different times. In Colorwave the time is divided into frames and a frame is divided into a number of slots. Each reader can access the tags using the slot time assigned to it. Depending on the probability of the interference, the colorwave adjusts the frame size to improve the efficiency. In this paper, we analyze the operations and the performance of the Colorwave algorithm and identify the problems of the algorithm. We also show that by adding some modifications to the algorithm the performance can be improved significantly.

• Journal of Internet Computing and Services
• /
• v.12 no.4
• /
• pp.35-43
• /
• 2011

Cognitive Radio (CR) ad hoc network is highly considered as one of promising future ad hoc networks, which enables opportunistic access to under-utilized licensed spectrum. Similarly to other CR networks, the spectrum sensing is a prerequisite in CR ad hoc network. Collaborative spectrum sensing can help increasing sensing performance. For such an infrastructureless network, however the coordination for the sensing collaboration is really complicated due to the lack of a central controller. In this paper, we propose a novel collaborative spectrum sensing scheme in which the final decision is made by the node with the highest data reliability based on a sequential Dempster Shafer theory. The collaboration of sensing data is also executed by the proposed contention-aware reporting mechanism which utilizes the sensing data reliability order for broadcasting spectrum sensing result. The proposed method reduces the collecting time and the overhead of the control channel due to the efficiency of the ordered sequential combination while keeping the same sensing performance in comparison with the conventional cooperative centralized spectrum sensing scheme.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.4
• /
• pp.340-349
• /
• 1995

There are several problems in a fishing by the midwater pair trawl net which is used in Denmark; steeply decreasing of the net height with the towing speed increasing, the larger volume of the fishing gear in comparison with the size of the trawler, and catching of a float in a mesh, etc. To prevent steeply decreasing of the net height with the towing speed increasing and catching of a float in a mesh, it is sometimes more useful to use the kite instead of floats. This paper describes the hydrodynamic drag and the opening efficiency of the midwater pair trawl net and the midwater kite pair trawl net obtained by the model test in the circulation water channel. The results can be summarized as follows; 1. The hydrodynamic drag of the midwater kite pair trawl net is about 0.7 times smaller than that of the midwater pair trawl net. 2. The net height, mouth area and filtering volume of the midwater kite pair trawl net are smaller then those of the midwater pair trawl net when the towing speed is below 2.5knots, almost the same at 2.7knots, and are larger over 3.0knots. The net width of the midwater kite pair trawl net is same as that of the midwater pair trawl net. 3. The shapes of net mouth of both net are an oval steeply flatted with the towing speed increasing. The filtering volume of the midwater kite pair trawl net is larger then that of the midwater pair trawl net by 3% at 3.0knots, 11% at 4.0knots, and 16% at 5.0knots respectively.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.18 no.4
• /
• pp.1001-1006
• /
• 2004

In order to examine the anti-arthritic properties of ShinEumHur(SEH)-herbal acupuncture, an adjuvant-induced arthritic rat was generated by the intra-articular injection of dried cells of Mycobacterium tuberculosis emulsified in squalene into the right knee joint. Fifty microliter of SEH extract was injected into Zusanli(ST36) acupoint on the ipsilateral hind paw every other day for 2 weeks. The body weight, knee circumference, squeak threshold, and weight distribution ratio were analyzed as the assessment methods addressing arthritic symptoms such as arthritic pain, edema, and tenderness. The weight distribution ratio was measured by a digital-type analgesia instrument using the dual channel scale that separately measures the weight the arthritic rat distributes to each hind paw, and thus quantifies both of swelling and pain severities at once. The therapeutic effects of SEH-herbal acupuncture, assessed by squeaking threshold and weight distribution ratio, were observed on 8th day after the arthritis induction as compared to saline group and control group. On 10th day, SEH-herbal acupuncture therapy significantly started to alleviate the growing pattern of knee circumference of an arthritic rat in the range of 0.2㎝. However, the loss of body weight was not significantly recovered. Taken together, the SEH-herbal acupuncture exhibited the significant therapeutic efficiency to treat adjuvant-induced monoarthritis in rat.

• Journal of Distribution Research
• /
• v.11 no.1
• /
• pp.99-124
• /
• 2006

The purposes of the study are two-folds. First, it analyzes how factors other than price(e.g. delivery service, saving point policies, free gifts) impact total price for various products and different types of stores. Second, it analyzes how to increase market efficiencies through price level, price differences, and the frequency of price changes for different shops, various products and different types of transactions. By analyzing the price level within different types of stores, there found that prices at on-line store were lower than off-line shops. It also found price differences between pure on-line, hybrid, and off-line store. Comparing prices by product size, there found that pure on-line shops have a lower price compared to others. The results showed that on-line store had lower price variation compared to off-line shops. When comparing pure on-line store to hybrid store, hybrid store had lower price variation. In terms of the frequency of price changes, hybrid stores had higher price fluctuations. In terms of total price differences for delivery distances, pure on-line store had great price fluctuation, excluding cosmetic goods. In conclusion, if we consider price level and price fluctuations, on-line store had more efficiencies and was superior in terms of price effectiveness. Hybrid shops, on the other hand, had greater advantages for seasonal goods and dominant products. Therefore, market entry strategies should differ based on order quantity, type of store(pure on-line, hybrid, off-line), product characteristics(seasonality, product life), etc.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3A
• /
• pp.209-216
• /
• 2005

This paper generally relates to the field of wireless local area networks(WLANs), and more particularly, to AP selection and association methods for the performance of a station. In these days, IEEE 802.11 Wireless LAN network is widely deployed and used as an emerging service to connect high-speed Internet in the public wireless environment. But, if there are many users in hot spot area, they suffer a severe decrease of performance. Thus it needs an association and access control mechanism especially when it is used in the public environment. In this paper, we suggest a selection and association method using Beacon or Probe Response frames based IEEE 802.11. Station selects AP using the information of the capacity area in a Beacon or a Probe Response frame. According to the present paper, an association method for a public WLAN service, which includes a WLAN user terminal and an AP for relaying WLAN communications to and from the user terminal, includes the steps of the user terminal asking the AP's states for access to a radio channel; and the station selects and associates with the AP According to the above-described selection in a high speed wireless Internet service based on public WLAN technologies that are currently in operations. Further, it is possible to improve the efficiency of network management.

• Progress in Medical Physics
• /
• v.23 no.3
• /
• pp.162-168
• /
• 2012

In proton therapy, in vivo dose verification is one of the most important parts to fully utilize characteristics of proton dose distribution concentrating high dose with steep gradient and guarantee the patient safety. Currently, in order to image the proton dose distribution, a prompt gamma distribution detection system, which consists of an array of multiple CsI(Tl) scintillation detectors in the vertical direction, a collimator, and a multi-channel DAQ system is under development. In the present study, the optimal design of prompt gamma distribution detection system was studied by Monte Carlo simulations using the MCNPX code. For effective measurement of high-energy prompt gammas with enough imaging resolution, the dimensions of the CsI(Tl) scintillator was determined to be $6{\times}6{\times}50mm^3$. In order to maximize the detection efficiency for prompt gammas while minimizing the contribution of background gammas generated by neutron captures, the hole size and the length of the collimator were optimized as $6{\times}6mm^2$ and 150 mm, respectively. Finally, the performance of the detection system optimized in the present study was predicted by Monte Carlo simulations for a 150 MeV proton beam. Our result shows that the detection system in the optimal dimensions can effectively measure the 2D prompt gamma distribution and determine the beam range within 1 mm errors for 150 MeV proton beam.