• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.624-628
• /
• 2008

Two-dimensional flow analysis is a way to provide good estimates for complex flow features in flow around islands and obstructions, flow at confluence and flow in braided channel. One of difficult problems to develop a two-dimensional hydraulic model is to analyze dry and wet area in river channel. Dry/wet problem can be encountered in river and coastal engineering problems, such as flood propagation, dam break analysis, tidal processes and so on. The objective of this study is to develop an accurate and robust two-dimensional finite element method with dry/wet technique in complex natural rivers. The dry/wet technique with Deforming Grid Method was developed in this study. The Deforming Grid Method was used to construct new mesh by eliminating of dry nodes and elements. The eliminated nodes and elements were decided by considering of the rising/descending velocity of water surface elevation. Several numerical simulations were carried out to examine the performance of the Deforming Grid Method for the purpose of validation and verification of the model in rectangular and trapezoidal channel with partly dry side. The application results of the model were displayed reasonable flow distribution.

• Journal of Environmental Science International
• /
• v.17 no.7
• /
• pp.783-793
• /
• 2008

The purpose of this study is to analyze the sensitivity of the RMA2 model parameters reflecting the flow characteristics of stream junction and thus understand the hydraulic characteristics of the channel confluence flow. This study dealt with the input parameters of the RMA-2 model, a two-dimensional numerical analysis model widely used for researches both at home and abroad. The parameters of the RMA-2 model are roughness coefficient, turbulent diffusion coefficient, Coriolis forces latitude, Density, and mesh size. This study those parameters estimated from actual heavy rainfall, and varied the parameter size by (-)30%${\sim}$+30% to review the characteristics of the flow characteristics of the channel section. Weobserved that when the ratio of the channel width was relatively small, the smaller the approaching angle was, the farther from the junctions became the generating place of the maximum flow velocity, however, when the ratio of the channel width was relatively large, the larger the approaching angle was, the farther the generating place of the maximum flow velocity from the junctions became. In particular, the distance between junctions and the place where the maximum flow velocity generated showed an absolute correlationover 90% of the relative channel width, but an inverse relationwas found when the distance to the place where the flow velocity generated was shortened as relative the channel width between the main channel and tributary increased.

• Journal of the Korean Geographical Society
• /
• v.33 no.3
• /
• pp.355-364
• /
• 1998

Flume experiments are conducted to describe the channel morphology at a tributary junction and to examine the influence of channel arrangements and hydrologic conditions on the channel morphology. When flow momenta of two tributaries are equal, a receiving stream tends to align with an axis bisecting junction angle. It causes lateral migration of a receiving stream according to an initial channel arrangement. As a result, the post-fonfluent channel morphology varies with plan geometry of a confluence such as symmetry, transition and asymmetry. Bed scour is the most notable morphology within a junction site. Its shape is characterized by steep walls which are primarily influenced by junction angle. Key control of scour dimension is also junction angle. Although the principle of accordant junction has been undoubtedly accepted, discordance is commonly developed at model and natural stream confluences. Unit discharge ratio of confluent streams is the most crucial factor because both discharge and sediment concentration ratios have an effect on discordance at a junction.

• Journal of Environmental Science International
• /
• v.7 no.3
• /
• pp.281-290
• /
• 1998

Thirty-eight sediment samples collected from the Youngsan River channel were analysed for Fe, Mn, Co, Cr, Cu, Nl, Zn and Pb to recognize the extent of contamination. Results showed that a wide range of contents was apparent far every metal over the study area. These differences have been mainly related to the textural variability of sediments. Exceptions to this were fecund in the contents of Cu, Zn, Pb and possibly Mn. The contents of Cu, Zn, Pb and Mn were particularly higher in the sediments loom the confluence of tributaries. Downstream profile of metal/Al ratios indicates that pollutant inputs from the Kwangju tributary are mainly responsible for enrichment of these metals in bed sediments of the Young-san River.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1277-1281
• /
• 2007

1차원 수치해석망은 수위관측소와 우량관측소를 경계로 광역모형을 구성하고 HEC-RAS를 이용하여 부정류 해석을 실시하였다. 그 결과로 얻은 유량과 수위자료는 2차원 해석 모형인 RMA-2의 경계조건으로 적용하였다. 또한 수치지형도를 이용하여 2차원 격자망을 구성하고 RMA-2를 적용하여 수리특성을 분석하였다. 광역모형의 구성에 의한 HEC-RAS 부정류 해석 결과 제방설치 전과 후의 수리특성의 변화는 그리 크게 나타나지 않았다. 또한 RMA-2 해석 결과 계획홍수량 초과하는 홍수에서 대상유역에서 제방설치 전과 후의 변화는 통수단면적의 감소에 따른 빠른 흐름과 수위의 변화를 가져왔으나 그 크기는 현저하지 않음을 보여준다.

• Journal of The Geomorphological Association of Korea
• /
• v.26 no.1
• /
• pp.41-57
• /
• 2019

The grain size characteristics of river sediments and the characteristics of bedrock were investigated for the 24km section of the Dong River upstream of the Han River. The bedrock of the study area is various limestone belonging to the Paleozoic Choseon limestone group, and Mesozoic sandstone and conglomerate occur in some areas. Most of the river channel is made of limestone, and most of the river bottom is covered with fluvial sediments. More than 70% of these sediments are sandstone and conglomerate, rather than limestone which forms the basis of the valley. Sediment particles seem to have been supplied upstream of the study area rather supplied from the slope near of the channel. It is difficult to find the statistically significant difference in the shape of the sediment particles of limestones and non-limestones. However, limestones has platy forms rather than block forms, it can be assumed that the limestone was supplied from the surrounding valley wall and transported over a short distance. The particle sizes of DG1~DG2(the upstream section) are decreasing in the downstream direction. However, at DG3, which is a tributary, Jijangcheon, confluence particle size increases and at DG4 particle size increases more. In the case of DG4, it may be influenced by the influx of tributaries, but it also can be supposed as the impact of the large flood in 2002. In the downstream parts(DG5~DG7), the particle size decreases exponentially with distance. The rebound strength of stream sediments and bedrock was measured by using Schmidt hammer. Limestone showed lower rebound strength than non-limestone. According to the results of the sediment and bedrock, it can be seen that the sandstone and conglomerate with high rebound values pass through valley with the relatively low strength limestone. The sediments of limestone were decreased in grain size more rapidly than those of limestone sediments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.911-918
• /
• 2013

Two - dimensional numerical analysis model(RMA2), is mainly applied to analyze the flood water levels, velocities and change of river bed at the downstream of Dam. The analysis result be able to influence to Gwangchon bridge from Juam dam, freeboard be insufficient 0.7m to left bank 300m section of dam downstream. Bank overflow is appear to all section of Bosung river to PMF spill condition. Inundated district is appear to river confluence to 200year frequency and is expand to bank overflow to PMF spill condition. Velocity in the channel was simulated high velocity to the bridge and narrow reach and appear to riverbed degradation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.629-633
• /
• 2008

Frequently occurring flood and drought have increased the necessity of an effective water resources control and management of river flows. Therefore, the simulation of the flow distribution in natural rivers is very important to the solution of a wide variety of practical flow problems in water resources engineering. Usually in many flow problems, two-dimensional approach can provide good estimates of complex flow features in the flow around islands and obstructions, flow at confluence and flow in braided channel. The objective of this study is to examine validation of developed an accurate and robust two-dimensional finite element method with wet and dry simulation in complex natural rivers. Milyang river, and Kumho river and Keum river were performed for tests. The results were compared with those of existing model. The suggested model displayed reasonable flow distribution compared with existing model in dry area for application of natural river flow. As a result of this study, the developed general two-dimensional model provide a reliable results for flow distribution of wet and dry domain, it could be further developed to basis for extending to water quality and sediment transport analysis.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.9
• /
• pp.4363-4365
• /
• 2016

Background: The complex anatomy of the pancreaticobiliary duct was crucial in management of pancreatic and biliary tract disease. Materials and Methods: Fresh specimens of pancreas, common bile duct (CBD), and duodenum were obtained en bloc from autopsies of 160 patients. Results: Ninety-three male and 67 female patients were included. The length of the pancreas ranged from 9.8-20 cm (mean, 16.20 +/- 1.70 cm). The intrapancreatic portion of the CBD showed patterns of three types: most common (85.30%) was type A, in which the anterior surface of the common bile duct was totally covered, while its posterior surface was partially covered, by the pancreatic parenchyma. On dissection of the accessory duct of Santorini, the accessory duct was traceable to the duodenal wall in 67.6%. The anatomy of the Wirsung-choledochus confluence was grouped into five different types. The common channel was found in 75.60% and its length varied from just a common junction (so-called "V-type" anatomy) to 15 mm (Y-type-b). Separate papillae (so-called "II-type") were found in 15.3% of specimens. Conclusions: Several important points regarding the anatomy of the pancreaticobiliary junction and pancreatic ductal system were illustrated in this study.

• Water for future
• /
• v.27 no.1
• /
• pp.53-67
• /
• 1994

Water quality analysis in the midstream of the Nakdong river is studied. Deterministic model RQ1 which contains two code, RQ1-1 for hydrologic and hydraulic analysis and RQ1-2 for water quality analysis are developed. Monthly mean and minimum discharges in the basin (from Waegwan to Jindong) are estimated. A varied flow analysis is performed based on the geometric data of channel and RQ-1 model. The maximum concentration of BOD and minimum concentration of DO are occurred at the confluence of Keumho river and immediately downstream of Hyunpoong, respectively. The computed concentrations of BOD at several points have good agreements with observed data. Maximum allowable BOD loads from the Keumho River are provided to attain the goal of water quality in the basin.