• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.6296-6302
• /
• 2014

A new technique, which can increase the channel bandwidth in an optical wireless orthogonal frequency division multiplexing (OFDM) link based on a light emitting diode (LED), is proposed. The technique uses adaptive sampling to convert an OFDM signal to a sparse waveform. In compressive sensing (CS), a sparse signal that is sampled below the Nyquist/Shannon limit can be reconstructed successively with sufficient measurements. The data rate of the proposed CS-based visible light communication (VLC)-OFDM link increases from 30.72 Mb/s to 51.2 Mb/s showing an error vector magnitude (EVM) of 31 % at the quadrature phase shift keying (QPSK) symbol.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.2
• /
• pp.385-395
• /
• 1999

Video-On-demand system provides electronic video rental services from remote video servers on a broadband communication networks. When we assume some situation that serve the same video stream by batching, each time single video stream became available at server-end side, we face the problem that what video stream to be scheduled at what time instant. Hence, in order to manage the resource bandwidth which is different at each stream, the policy of channel allocation became important factor. In this work, we proposed three type of scheduling policies with queueing, as are cumulative Waiting Time(CWT), Mean Waiting Time(MWT) and Predictable Popular Factor(PPF). While CWT policy is good for popular video, MWT policy was good for non-popular video. Also, we know that PPT policy has some fairness for average wait time and reneging rate of user requests.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.3
• /
• pp.3-10
• /
• 2016

To establish a network environment where multiple wireless personal area networks(WPAN) are simultaneously operating in the same area, we need to consider the effects of inter-device interference. The extent of interference effect from neighboring frequency channel interferer may be different depending on the modulation types that are used for constructing the wireless network. If a modulation scheme with high spectral side lobes is used, the spatial separation between devices plays a major role in determining the amount of interference from neighboring frequency channel interferer. In this paper, we investigate the effect of inter-device interference in the overlapped raised cosine offset quadrature-quadrature phase shift keying (ORC-$OQ^2PSK$) modulation based WPAN. By comparing the results with those of GFSK modulation based WPAN, we verify the feasibility of ORC-$OQ^2PSK$ based WPAN.

• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.95-100
• /
• 2021

If we know the location of the hull block and the welding feeder in the shipyard, we can easily obtain the location information of the worker. That data is very useful for implementing a workplace safety monitoring system. However, it is difficult to apply a fixed communication network to the workplace due to the specificity of the hull structure and welding process. In this study, inductive power line communication, which can replace dedicated communication line, was reviewed. A ferrite core was used as an inductive coupler to be installed on the power cable of the welding machine, and a nano-crystalline core was applied as a coupler to be fastened to the support rod of the metal block. In order to visualize the operating principle of the proposed couplers, 3D modeling and finite element analysis were performed with the COMSOL AC/DC module. In the communication performance test using an aluminum profile, when the communication channel was formed by the contact of the welding electrode, the bandwidth was kept above 6 Mbps.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.1
• /
• pp.1-9
• /
• 2021

High-frequency bistatic sea surface scattering channels according to sea state were measured at an experimental site of Geoje bay in April 2020, and compared with predictions based on scattering theory. A linear frequency-modulated signal with a center frequency of 128 kHz and a bandwidth of 32 kHz was used for the acoustic measurements. Sea surface wavenumber spectrum was calculated from surface roughness data measured by a wave buoy, and bistatic scattering cross-section of Small Slope Approximation (SSA) based on the wavenumber spectrum was estimated. In addition, scattering from near-surface bubbles using wind speed measured during experiments was considered. Surface scattering channel intensity impulse responses were simulated using the scattering cross-section and the simulation results were compared and analyzed with the field data.

• Journal of Broadcast Engineering
• /
• v.27 no.6
• /
• pp.914-922
• /
• 2022

In this paper, we construct a commercial 4K UHD(Ultra High Definition) streaming device that utilizes a 5G mobile communication network as a transport channel and conduct a streaming performance test. It uses RTP(Realtime Transport Protocol) which has transmission quality monitoring capability as a transmission protocol to apply adaptive streaming. In addition, it provides the function to adjust the encoding rate of the video signal so that encoding can be optimized for the change in the bandwidth of the transmission channel. Through the performance test, it is confirmed that the H.265 encoding rate for 4K UHD signal is 48.69Mbps, the average glass-to-glass delay time is 293.60ms, and the average time difference between video and audio for lip sync is 120ms. With the result of performance test, it is shown that the streaming device is applied to 4K UHD Streaming device over 5G mobile communication network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5B
• /
• pp.820-829
• /
• 2000

In this paper, DSPA(Dynamic Signalling Period Allocation) algorithm that has been proposed by the authors for MAC(Medium Access Control) protocols in W-ATM(Wireless Asynchronous Transfer Mode) is applied to mixed traffic conditions composed of various service classes. We investigate the bandwidth utilization efficiency and quality of service(QoS) fulfillment by the DSPA algorithm used in W-ATM MAC protocols. Simulation results indicate that the DSPA algorithm significantly increases the throughput of the system with the minimum control overhead. Moreover, QoS of each service class is well satisfied by proper and fair channel allocation to different service classes according to their requirements.

• Journal of Digital Convergence
• /
• v.12 no.4
• /
• pp.251-257
• /
• 2014

In u-Healthcare environment, large amounts of important vital information is processed through M2M(Machine to Machine). M2M is configured by wireless networks and has several problems for limited bandwidth and low reliability. Therefore, in this paper is proposed a method called uHLZW(u-Healthcare LZW) to improve channel efficiency to solve such problem. uHLZW algorithm has high compression ratio for vital data. The results showed that the average compression ratio of uHLZW got from 1.6 times to 4.0 times better than existing methods(Huffman and LZW compression).

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.11
• /
• pp.2922-2931
• /
• 1999

In this paper, we propose a new framework for scalable media object to adapt the various QoS requirements in the heterogeneous networking environment. An MPEG-2 video is split into a set of scalable media objects in terms of temporal scaling and fidelity scaling. The portion of the scalable media objects is selectively delivered to adapt the QoS requirement. This framework can satisfy the various QoS requirements on bandwidth, even though the clients share a multipoint channel. By analysis on the rate-distortion characteristics of scalable media object framework, we shows our approach is feasible to support the various QoS requirements.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11A
• /
• pp.933-940
• /
• 2011

In this paper, Ka-band transceiver for road watch radar system is designed and fabricated. The transceiver for road watch radar system is composed of waveform generator, frequency generator. IF transceiver and RF up/down converter. The transceiver especially has 3 different waveform mode for target detection range. The transceiver had over 150 MHz bandwidth in Ka-band and 22 dBm output power. The receiver gain and noise figure was 30 dB and 4 dB respectively. The receive dynamic range was 65.28dB and amplitude imbalance and phase imbalance of I/Q channel was 0.3 dB and 1.8 degree respectively. The transceiver meets the required electrical performances through the individual tests.