• Journal of Internet Computing and Services
• /
• v.24 no.1
• /
• pp.1-7
• /
• 2023

Recently, the technology of device-to-device(D2D) communication has been receiving big attention to improve the system performance since the amount of high quality/large capacity data traffic from smart phones and various devices of Internet of Things increase rapidly in 5G/6G based next generation cellular networks. However, even though the system performance of macro cells increase by reusing the frequency, the performance of macro user equipments(MUEs) decrease because of the strong interference from D2D user equipments(DUEs). Therefore, this paper proposes a dynamic channel management(DCM) scheme for DUEs to guarantee the performance of MUEs as the number of DUEs increases in next generation downlink cellular networks. In the proposed D2D DCM scheme, macro base stations dynamically assign subchannels to DUEs based on the interference information and signal to interference and noise ratio(SINR) of MUEs. Simulation results show that the proposed D2D DCM scheme outperforms other schemes in terms of the mean MUE capacity as the threshold of the SINR of MUEs incareases.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.1
• /
• pp.60-70
• /
• 1987

Recently the tendency of the network system development rapidly progresses toward ISDN that intergrates all presetn-day communication networks and services into a single, universal network set up on the basis of the exisiting telephone network. For this reason many countries pay worldwide attention to the researches about ISDN, especially to the researches about the exchange and the ISDN user-network interface which is one of the most important parts of network system. This paper is the first part of the two-par papers describing the ISDN user-network interface. in this paper, after surveying the architecture of ISDN exchange recommended by CCITT, the general architecture of the ISDN exchage is proposed, Based on this architecture, the switching emulator is implemented, and the necessary conditions of the ISDN exchage(LAPO, CCP etc) are also studied.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.11
• /
• pp.1168-1172
• /
• 2011

Beam projector is popularly used for presentation. In order to pay attention to local area of the beam projector display, a laser pointer is used together with a pointing device(Mouse). Simple wireless presenter has limited functions of a pointing device such as "go to next slide" or "back to previous slide" in a specific application(Microsoft PowerPoint) through wireless channel; thus, there is inconvenience to do other tasks e.g., program execution, maximize/minimize window etc. provided by clicking mouse buttons. The main objective of this paper is to implement a multi-functional laser-pointer mouse that has the same functions of a computer mouse. In order to get position of laser spot in the projector display, an image processing to extract the laser spot in the camera image is required. In addition, we propose a transformation of the spot position into computer display coordinates to execute mouse functions on computer display.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.309-309
• /
• 2009

In-Ga-Zn-O (IGZO) has drawn much attention as a compatible material for transparent thin film transistors (TTFT) channel layer due to its high mobility and optical transparency at low processing temperatures. In this work, we investigated the effect of oxygen ambient on structural, electrical and optical properties of amorphous In-Ga-Zn-O (IGZO) thin films by using pulsed laser deposition (PLD). The films were deposited at various oxygen pressures and the structural, electrical and optical properties were investigated. X-ray diffraction (XRD) analysis showed that amorphous IGZO films were grown at all oxygen pressures. The surface morphology and optical properties with various oxygen pressures were studied by field emission scanning electron microscopy (FE-SEM) and UV-VIS spectroscopy, respectively. The grain boundary was observed more apparently and the calculated optical band gap became larger as oxygen pressure increased. To examine the electrical properties, Hall-effect measurements were carried out. The films showed high mobility.

• Journal of Advanced Marine Engineering and Technology
• /
• v.8 no.1
• /
• pp.85-99
• /
• 1984

The stability of the two-phase flow in a heated channel is of great importance in the design and operation of the boilers and light water nuclear reactors, because it can cause flow oscillations and lead to a violation of thermal limits with resultant overheating of the channels and cladding. This paper presents a systematic evaluation to the variation effects of the basic four (4) dimensionless parameters in a homogeneous equilibrium model. The flow stability is examined on the ground of static characteristic curves. The complicated transfer function of flow dynamics which gives consideration to the transport lag of density wave is derived, and the transient flow stability is analysed by applying the Nyquist stability criterion in control engineering. The analysis results summed up as follows 1. The coolant flow becomes stable in large friction number and specific flow, while it is unstabale in small friction number and flow. 2. Large phase-change number and Froude number destabilize the two-phase flow, but small numbers stabilize it. The effect to variation of phase-change number is more dominant compared with Froude number. 3. The dynamic analysis is required to hold the sufficient safety of heated channels since only static results does not keep it. The special attention could be payed in the design and operation of heat engines, because the unstaable region exists within the stable boundary at small and middle phase-change number and Froude number.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2005.05a
• /
• pp.62-69
• /
• 2005

Maneuverability of ships has been receiving a great deal of attention both concerning navigation safety and the prediction of ship maneuvering characteristics, to improve it. High-lift device could be applied to design of rudder at design stage. Now, we carried out the flow visualization and inversitgation of flow around a flap rudder (trailing-edge flap). Flow visualization results of flap defection shown as the flow around a NACA0020 Flap Rudder will be conducted in a Circulating Water Channel. The purpose of this investigation will be to investigate the development of the separation region on the flap rudder with the variation of angle of attack and determine the angle of attack at which the flow separates and reattaches.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.2
• /
• pp.786-799
• /
• 2018

Recently, NFV has attracted attention as a next-generation network virtualization technology for hardware -independent and efficient utilization of resources. NFV is a technology that not only virtualize computing, server, storage, network resources based on cloud computing but also connect Multi-Tenant of VNFs, a software network function. Therefore, it is possible to reduce the cost for constructing a physical network and to construct a logical network quickly by using NFV. However, in NFV, when a new VNF is added to a running Tenant, authentication between VNFs is not performed. Because of this problem, it is impossible to identify the presence of Fake-VNF in the tenant. Such a problem can cause an access from malicious attacker to one of VNFs in tenant as well as other VNFs in the tenant, disabling the NFV environment. In this paper, we propose Auto-configurable Security Mechanism in NFV including authentication between tenant-internal VNFs, and enforcement mechanism of security policy for traffic control between VNFs. This proposal not only authenticate identification of VNF when the VNF is registered, but also apply the security policy automatically to prevent malicious behavior in the tenant. Therefore, we can establish an independent communication channel for VNFs and guarantee a secure NFV environment.

• Journal of Information Technology Applications and Management
• /
• v.16 no.2
• /
• pp.79-98
• /
• 2009

IPTV has risen as a new driving force amid concerns against the saturated internet market and gained enormous attention of both the government and industry as niche market. Especially, IPTV banking which is one of the major services, IPTV has risen up recently as another financial service channel. Prior to the expansion of the new technology, this study attempts to predict its success possibility. In order to grasp variables that would effect formation of user intention of potential adopters, and external variables that influence user intention of IPTV banking have been confirmed and studied empirically based on Technology Acceptance Model(TAM). As a result, it was validated that self?efficacy, facilitating condition, social influence, and perceived importance to TV banking needs are the influential variables. Therefore, one may able to find appropriate direction of marketing activities for effective expansion of IPTV banking service through this study. Also, considering the fact that the number of service users has absolute influence over profit determination in the IPTV banking service industry, the study about characteristics and intention of such potential adopters could certainly be significant.

• Journal of Global Scholars of Marketing Science
• /
• v.8
• /
• pp.315-339
• /
• 2001

As a new environment, the Internet proposes to us the innovative change of our life. Recently, there has been much attention to the virtual shopping mall as a new distribution channel and marketing tool. In this study, the effect of satisfaction and commitment on loyalty at virtual shopping mall is investigated. Additionally, we examined the effects of the navigation, merchandise value, shopping experience, and community on satisfaction and commitment. The study results as follows: First, satisfaction is a function of navigation, merchandise value, shopping experience, and customer intimacy. Second, commitment is a function of shopping experience, customer intimacy, and community. Third, satisfaction and Commitment is significantly related to virtual shopping mall loyalty.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.9
• /
• pp.671-675
• /
• 2010

Gallium nitride (GaN), wide bandgap semiconductor, has attracted much attention because they are projected to have much better performance than silicon. In this paper, effects of design parameters change of GaN power static induction transistor (SIT) on the electrical characteristics (breakdown voltage, on resistance) were analyzed by computer simulation. According to the analyzed results, the optimization was performed to get power GaN SIT that has 600 V class breakdown voltage. As a result, we could get optimized 600 V class power GaN SIT that has higher breakdown voltage and lower On resistance with a thin (a several micro-meters) thickness of the channel layer.