• Title/Summary/Keyword: channel attention

Search Result 388, Processing Time 0.033 seconds

IEEE 802.11a Interference Suppression Method Using by SVD Algorithm in LR-UWB Systems (LR-UWB 시스템에서 특이값 분해를 이용한 IEEE 802.11a 간섭억압기법)

  • Kim, Dong-Hee;Kim, Tae-Hun;Jang, Hong-Mo;Park, Ho-Hwan;Kwak, Kyung-Sup
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.33 no.1A
    • /
    • pp.74-84
    • /
    • 2008
  • UWB radio systems have drawn attention during the last few years. These systems are the core technique for ubiquitous home and enable to co-exist with other narrow band systems over the same frequency without interfering them. But UWB signals have a very low power per pulse, so they are affected by strong narrow band interferences. Specially, IEEE 802.11a systems which operate around 5GHz overlap the band of UWB signals and they will interfere with UWB systems significantly. In this paper, we propose a novel narrow band interference suppression method based on singular value decomposition(SVD) algorithm for DS-UWB in IEEE 802.15.4a channel model. The proposed method is very effective and robust for both a single user DS-UWB system and a multiuser DS-UWB system to reduce the narrow band interference.

VirtFrame: A Sniffing-based Throughput Estimation Scheme in IEEE 802.11 Wireless LANs (IEEE 802.11 무선랜 환경에서의 스니핑 기반 전송률 측정 기법(VirtFrame)에 관한 연구)

  • Seo, Sung-Hoon;Baek, Jae-Jong;Kim, Dong-Gun;Song, Joo-Seok
    • The KIPS Transactions:PartC
    • /
    • v.18C no.3
    • /
    • pp.187-194
    • /
    • 2011
  • IEEE 802.11 wireless LAN has become the center of attention for one of the most dominant wireless networking technologies nowadays. In densely deployed wireless LANs, mobile stations are exposed to a number of AP, thus it is needed to select the best AP to associate with. The most common approach is to select the AP with the highest received signal strength. However it does not consider traffic load imposed to each AP so that it may cause the poor network performance. Therefore, in this paper, we propose a throughput estimation scheme for neighboring APs by sniffing the traffic within 802.11 networks. We devise a tool, named "VirtFrame", which is to estimate the station's capable throughput from neighbor APs based on the channel access time by virtually combining the sniffed frames. Simulation results show that our proposed scheme well matches that there exists correlation between the channel access time and the actual throughput of the APs.

Manufacture and characteristic evaluation of Amorphous Indium-Gallium-Zinc-Oxide (IGZO) Thin Film Transistors

  • Seong, Sang-Yun;Han, Eon-Bin;Kim, Se-Yun;Jo, Gwang-Min;Kim, Jeong-Ju;Lee, Jun-Hyeong;Heo, Yeong-U
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2010.08a
    • /
    • pp.166-166
    • /
    • 2010
  • Recently, TFTs based on amorphous oxide semiconductors (AOSs) such as ZnO, InZnO, ZnSnO, GaZnO, TiOx, InGaZnO(IGZO), SnGaZnO, etc. have been attracting a grate deal of attention as potential alternatives to existing TFT technology to meet emerging technological demands where Si-based or organic electronics cannot provide a solution. Since, in 2003, Masuda et al. and Nomura et al. have reported on transparent TFTs using ZnO and IGZO as active layers, respectively, much efforts have been devoted to develop oxide TFTs using aforementioned amorphous oxide semiconductors as their active layers. In this thesis, I report on the performance of thin-film transistors using amorphous indium gallium zinc oxides for an active channel layer at room temperature. $SiO_2$ was employed as the gate dielectric oxide. The amorphous indium gallium zinc oxides were deposited by RF magnetron sputtering. The carrier concentration of amorphous indium gallium zinc oxide was controlled by oxygen pressure in the sputtering ambient. Devices are realized that display a threshold voltage of 1.5V and an on/off ration of > $10^9$ operated as an n-type enhancement mode with saturation mobility with $9.06\;cm^2/V{\cdot}s$. The devices show optical transmittance above 80% in the visible range. In conclusion, the fabrication and characterization of thin-film transistors using amorphous indium gallium zinc oxides for an active channel layer were reported. The operation of the devices was an n-type enhancement mode with good saturation characteristics.

  • PDF

The Influence of Digital Content Reflected in Social Media (소셜 미디어로 본 디지털 콘텐츠의 영향)

  • Lee, Suhyun;Kim, JeongYeon
    • The Journal of Society for e-Business Studies
    • /
    • v.23 no.4
    • /
    • pp.127-136
    • /
    • 2018
  • With the increased value in digital contents, the influence of social media has increased exponentially over the past years. Focused around those in their teens and twenties, social media has spread its influence to people regardless of one's age or gender. This increased attention is reflected by the public's interest in pets, especially those dealt with in the personal media sector. This paper will focus on the two most popular Korean cat youtube channels called "CreamHeroes" and "SuriNoel." By analyzing the top thirty most viewed videos on each channel, real time streaming, goods based on the cats starring on the channel, and comments left by the channels' subscribers, it can be concluded that people watching videos categorized as "Viewnimal" derive surrogate pleasure from their viewings. The following creates the potential for increased conversation regarding the subject of shelter animals and animal abuse.

Effect of Information Source, Sales Promotion Type, and Impulse Buying Tendency Characteristics on Fashion Live Commerce Purchase Intention (정보원 특성, 판매촉진유형, 충동구매성향이 패션 라이브커머스 구매의도에 미치는 영향)

  • Choi, Hyun;Hwang, Sun Jin
    • Journal of Fashion Business
    • /
    • v.26 no.4
    • /
    • pp.52-63
    • /
    • 2022
  • As live commerce, mobile sales platforms based on real-time content and text are drawing attention as a new marketing channel. In particular, the fashion industry also using live commerce as a new fashion distribution channel, requiring marketing strategies to utilize it efficiently. This study attempted to verify the effect of information source, sales promotion, and impulse buying tendency characteristics on fashion live commerce purchase intention. The experimental design of this study was 2(characteristics of information source: expertise vs attractiveness) × 2(sales promotion type: value-added vs price discount) × 2(impulse buying tendency: high vs low) three-way mixed analysis of variance(ANOVA). A convenience sampling of 264 women in their 20s and 50s living in Seoul and the Gyeonggi area who had purchased products through Live Commerce was conducted. For the final analysis, 240 questionnaires were used. Data were analyzed by the SPSS 26 program and three-way ANOVA. Simple main effects analysis was conducted. The results of this study follow. First, there were statistically significant differences in purchase intention according to consumers' impulse buying tendencies and sales promotions. Second, information source and sales promotion showed statistically significant interaction effects on purchase intention. Lastly, information source, sales promotion, and impulse buying tendency showed significant three-way interaction effects on fashion live commerce purchase intention. Therefore, conducting appropriate marketing analysis can result in positive attitudes regarding live commerce products and substantive increases in sales.

Low-Cost IoT Sensors for Flow Measurement in Open Channels: A Comparative Study of Laboratory and Field Performance

  • Khatatbeh, Arwa;Kim, Young-Oh
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2023.05a
    • /
    • pp.172-172
    • /
    • 2023
  • The use of low-cost IoT sensors for flow measurement in open channels has gained significant attention due to their potential to provide continuous and real-time data at a low cost. However, the accuracy and reliability of these sensors in real-world scenarios are not well understood. This study aims to compare the performance of low-cost IoT sensors in the laboratory and real-world conditions to evaluate their accuracy and reliability. Firstly, a low-cost IoT sensor was integrated with an IoT platform to acquire real-time flow rate data. The IoT sensors were calibrated in the laboratory environment to optimize their accuracy, including different types of low-cost IoT sensors (HC-SR04 ultrasonic sensor & YF-S201 sensor) using an open channel prototype. After calibration, the IoT sensors were then applied to a real-world case study in the Dorim-cheon stream, where they were compared to traditional flow measurement methods to evaluate their accuracy.The results showed that the low-cost IoT sensors provided accurate and reliable flow rate data under laboratory conditions, with an error range of less than 5%. However, when applied to the real-world case study, the accuracy of the IoT sensors decreased, which could be attributed to several factors such as the effects of water turbulence, sensor drift, and environmental factors. Overall, this study highlights the potential of low-cost IoT sensors for flow measurement in open channels and provides insights into their limitations and challenges in real-world scenarios.

  • PDF

On the Availability of Han river as Water Transport Route (수상운송로로서 한강의 이용가능성에 관한 연구)

  • Choi, K.I.;Roh, H.S.;Lee, C.Y.
    • Journal of Korean Port Research
    • /
    • v.7 no.2
    • /
    • pp.37-60
    • /
    • 1993
  • Because of the rapid growing traffic volumes of cargo, especially between Seoul and Inchon, and lack of investment into transport infrastructure in the past, in Kyong-in area have suffered from the serious traffic congestion in the public-road and the express-way network, But the further expansion of the traffic volume in near future is difficult due to burden of the higher expansion of the traffic volume in near future is difficult due to burden of the higher construction cost. Although the traffic congestion on the Kyung-in railway, is not very serious comparing with the road sector, the shortage of capacity on some main lines becomes emerged as a problem as railway traffic has increased. Unlike these two modes, the water transport, which has been paid relatively less attention for commodity transport in Kyong-in area, has not any constaint in this respect. Han river has been used as a water transport route in Chosun Dynasty which is called Cho-wun. This paper therefore aims to propose the availability of Han river as the alternative water transportation mode, in order to decrease the congestion between Seoul-Inchon by considering the construction of Kyong-in artificial water channel in near future. In this paper, we investigate the availability of Nanji-do as the physical distribution depot connecting with the circulation express way in the national capital distribution depot connecting with the circulation express way in the national capital. We also estimate the traffic volume by using the push-barge carrier (300DWT) in the same channel through the simulation under some assumptions such as ship's turnaround time, speed, etc.

  • PDF

Effects of die cooling on change of extrusion characteristics of Al-Mn-based thin-walled flat multi-port tube (금형 냉각이 Al-Mn계 다중압출 평판관의 압출 특성 변화에 미치는 영향)

  • Young-Chul Shin;Seong-Ho Ha;Tae-Hoon Kang;Kee-Ahn Lee;Seung-Chul Lee
    • Design & Manufacturing
    • /
    • v.17 no.4
    • /
    • pp.63-71
    • /
    • 2023
  • In order to increase the extrusion production speed of aluminum, extrusion die cooling technology using liquid nitrogen has recently attracted a lot of attention. Increasing the extrusion speed increases the temperature of the bearing area of extrusion dies and the extrusion profile, which may cause defects on the surface of extruded profile. Extrusion die cooling technology is to directly inject liquid nitrogen through a cooling channel formed between the die and the backer inside the die-set. The liquid nitrogen removes heat from the die-set, and gaseous nitrogen at the exit of the channel, covers the extrusion profile of an inert atmosphere reducing the oxidation and the profile temperature. The aim of this study is to evaluate the cooling capacity by applying die cooling to extrusion of Al-Mn-based aluminum alloy flat tubes, and to investigate the effects of die cooling on the change in extrusion characteristics of flat tubes. Cooling capacity was confirmed by observing the temperature change of the extrusion profile depending on whether or not die cooling is applied. To observe changes in material characteristics due to die cooling, surface observation is conducted and microstructure and precipitate analysis are performed by FE-SEM on the surface and longitudinal cross section of the extruded flat tubes.

Effect of Interference in CSMA/CA Based MAC Protocol for Underwater Network (CSMA/CA 기반 수중 통신망에서 간섭의 영향 연구)

  • Song, Min-je;Cho, Ho-shin;Jang, Youn-seon
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.40 no.8
    • /
    • pp.1631-1636
    • /
    • 2015
  • With the advance of wireless communication technology in terrestrial area, underwater communication is also evolving very fast from a simple point-to-point transmission to an elaborate networked communications. Underwater acoustic channel has quite different features comparing with the terrestrial radio channel in terms of propagation delay, Doppler shift, multipath, and path loss. Thus, existing technologies developed for terrestrial communication might not work properly in underwater channel. Especially medium access control (MAC) protocols which highly depend on propagation phenomenon should be newly designed for underwater network. CSMA/CA has drawn lots of attention as a candidate of underwater MAC protocol, since it is able to resolve a packet collision and the hidden node problem. However, a received signal could be degraded by the interferences from the nodes locating outside the receiver's propagation radius. In this paper, we study the effects of interference on the CSMA/CA based underwater network. We derived the SNR with the interference using the sonar equation and analyzed the degradation of the RTS/CTS effects. These results are compared with the terrestrial results to understand the differences. Finally we summarized the design considerations in CSMA/CA based underwater network.

Activation of K+ channel by 1-EBIO rescues the head and neck squamous cell carcinoma cells from Ca2+ ionophore-induced cell death

  • Yin, Ming Zhe;Park, Seok-Woo;Kang, Tae Wook;Kim, Kyung Soo;Yoo, Hae Young;Lee, Junho;Hah, J. Hun;Sung, Myung Hun;Kim, Sung Joon
    • The Korean Journal of Physiology and Pharmacology
    • /
    • v.20 no.1
    • /
    • pp.25-33
    • /
    • 2016
  • Ion channels in carcinoma and their roles in cell proliferation are drawing attention. Intracellular $Ca^{2+}$ ($[Ca^{2+}]_i$)-dependent signaling affects the fate of cancer cells. Here we investigate the role of $Ca^{2+}$-activated $K^+$ channel (SK4) in head and neck squamous cell carcinoma cells (HNSCCs) of dif-ferent cell lines; SNU-1076, OSC-19 and HN5. Treatment with $1{\mu}M$ ionomycin induced cell death in all the three cell lines. Whole-cell patch clamp study suggested common expressions of $Ca^{2+}$-activated $Cl^-$ channels (Ano-1) and $Ca^{2+}$-activated nonselective cation channels (CAN). 1-EBIO, an activator of SK4, induced outward $K^+$ current (ISK4) in SNU-1076 and OSC-19. In HN5, ISK4 was not observed or negligible. The 1-EBIO-induced current was abolished by TRAM-34, a selective SK4 blocker. Interestingly, the ionomycin-induced cell death was effectively prevented by 1-EBIO in SNU-1076 and OSC-19, and the rescue effect was annihilated by combined TRAM-34. Con-sistent with the lower level of ISK4, the rescue by 1-EBIO was least effective in HN5. The results newly demonstrate the role of SK4 in the fate of HNSCCs under the $Ca^{2+}$ overloaded condition. Pharmacological modulation of SK4 might provide an intriguing novel tool for the anti-cancer strategy in HNSCC.