• 한국분무공학회지
• /
• 제13권4호
• /
• pp.212-219
• /
• 2008

To develop the twin-fluid atomizer having the excellent performance of painting, the spray characteristics of how a wide area can be painted efficiently by one time spraying were studied in this paper. Spray phenomena are affected by the many factors determining the spray field such as the spraying pressure of gas, the spraying pressure and viscosity of liquid paints, the opening duration of needle valve, the design dimension of nozzle, and so on. As the results of experiments, these factors affecting on spray characteristics were suggested as followings; 1) The optimum spraying pressure of gas was $0.015{\sim}0.02\;kPa$, and the appropriate spraying pressure of liquid paint was 0.01kPa, In these situations, the setting up pressures must be compensated as much as the losing amount of pressure because a decompression occurred when operating valves. 2) The duration of opening the needle valve must be sustained for $1{\sim}2$ seconds to inject gas after spraying the liquid paint. This operating of the needle valve was necessary to avoid the affect on the changing of liquid column length, and to prevent the droplet deposit at the initial time of spraying. 3) The spray tip penetration was gained form the experimental equation, and the effective spraying angle was $85^{\circ}{\pm}5^{\circ}$ just at he appropriate spraying pressure of gas. The distribution of the area sprayed had the variation in $350{\pm}50\;mm$ because of the spraying pressure of gas, the its distance from the spray tip, and the lift of the needle valve.

• Korean Chemical Engineering Research
• /
• 제52권3호
• /
• pp.307-313
• /
• 2014

본 연구에서는 Isobutyl Acetate와 Isobutyl Alcohol의 공비혼합물을 압력변환증류공정(PSD; Pressure Swing Distillation Process)을 이용하여 99.9 mol% 이상의 Isobutyl Acetate를 분리하는 공정모사를 수행하였다. 압력변환증류공정은 공비혼합물의 상대휘발도와 공비조성이 압력의 변화에 따라 차이가 나는 특성을 이용한 공정이다. 액상에서는 Non-Random Two Liquid (NRTL) model을 그리고 기상에서는 Peng-Robinson equation을 이용하였다. 최적화 방법으로 환류비와 주입단 위치를 변수로 두고 총 재비기 소요 열량을 최소화시키는 목적으로 최적화를 수행하였다. 압력변환 증류공정은 두 개의 증류탑을 필요로 함에 따라 고압 증류탑과 저압 증류탑의 배열에 따른 최적화 조건 또한 비교를 수행하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권5호
• /
• pp.103-113
• /
• 1996

The properties of the deposited film depend on the deposition condition and these, in turn depend critically on the morphology and crystal orientation of the films. Therefore, it is important to clarify the nucleation occurrence and growth stage of the morphology and orientation of the film affected by deposition parameters, e.g. the gas pressure and bias voltage etc. In this work, magnesium thin flims were prepared on cold-rolled steel substrates by a thermo-eletron activation ion plating technique. The influence of nitrogen gas pressure and substrate bias voltage on their crystal orientation and morphology of the coated films were investigated by scanning electron microscopy (SEM) and X-ray diffraction, respectively. The diffraction peaks of magnesium film became less sharp and broadened with the increase of nitrogen gas pressure. With an increase in nitrogen gas pressure, flim morphology changed from colum nar to granular structure, and surface crystal grain-size decreased. The morphology of films depended not only on gas pressure but also on bias voltage, i.e., the effect of increasing bias voltage was similar to that of decreasing gas pressure. The effect of crystal orientation and morphology of magnesium films on corrosion behaviors was estimated by measuring anodic polarization curves in deaerated 3%NaCl solution. Magnesium, in general, has not a good corrosion resistance in all environments. However, these magnesium films prepared by changing nitrogen gas pressure showed good corrosion resistance. Among the films, magnesium films which exhibited granular structure had the highest corrosion resistance. The above phenomena can be explained by applying the effects of adsorption, occlusion and ion sputter of nitrogen gas.

• 한국추진공학회지
• /
• 제16권6호
• /
• pp.56-61
• /
• 2012

한국형발사체 1단에 사용될 75톤급 액체로켓엔진 연소기의 기술검증시제를 설계, 제작하여 연료 수류시험을 수행하였다. 가압압력을 조절하여 연료 유량을 변경함으로써 주어진 유량에서 발생하는 연소기 재생냉각 채널에서의 압력 손실을 측정하였다. 연소실 각 부에서의 압력 손실을 측정할 수 있었으며, 상당량의 압력 손실이 유속이 강한 연소실 노즐목부에서 발생함을 확인하였다. 주어진 연료 수류시험 조건에서 수력학 해석을 통하여 수력학 해석 방법의 정확도를 검증할 수 있었다.

• 한국추진공학회지
• /
• 제20권4호
• /
• pp.94-103
• /
• 2016

액체로켓엔진에서의 재생냉각 채널은 높은 온도의 연소가스로부터 연소실 내벽을 효율적으로 냉각하기 위해 사용되며, 냉각채널 설계를 위해서는 열전달 특성과 압력손실 특성을 미리 예측하여야 한다. 본 연구에서는 서로 다른 형상을 갖는 5개의 냉각채널을 설계하고, 커터와 엔드밀로 채널을 제작하였다. 채널을 흐르는 유속과 후단 압력조건을 달리하여 가공방법, 채널 형상, 유동조건에 따른 압력손실을 실험적으로 측정하여 해석결과와 비교를 수행하였다. 동일 형상 및 유동조건에서 커터로 가공된 채널이 엔드밀로 가공된 채널보다 압력손실이 적었다. 또한 채널 형상, 유동조건에 따라 실험결과와 해석결과의 압력손실 비가 달라짐을 확인할 수 있었다.

• 소성∙가공
• /
• 제28권1호
• /
• pp.43-48
• /
• 2019

Aluminum nitride (AlN) is used by the semiconductor industry, and is a compound that is required when manufacturing high thermal conductivity. The AlN films with c-axis orientation and thermal conductivity characteristic were deposited by using the Pulsed Laser Deposition (PLD). The AlN thin films were characterized by changing the deposition conditions. In particular, we have researched the AlN thin film deposited under optimal conditions for growth atmosphere. The epitaxial AlN films were grown on sapphire ($c-Al_2O_3$) single crystals by PLD with AlN target. The AlN films were deposited at a fixed temperature of $650^{\circ}C$, while conditions of nitrogen ($N_2$) pressure were varied between 0.1 mTorr and 10 mTorr. The quality of the AlN films was found to depend strongly on the $N_2$ partial pressure that was exerted during deposition. The X-ray diffraction studies revealed that the integrated intensity of the AlN (002) peak increases as a function the corresponding Full width at half maximum (FWHM) values decreases with lowering of the nitrogen partial pressure. We found that highly c-axis orientated AlN films can be deposited at a substrate temperature of $650^{\circ}C$ and a base pressure of $2{\times}10^{-7}Torr$ in the $N_2$ partial pressure of 0.1 mTorr. Also, it is noted that as the $N_2$ partial pressure decreased, the thermal conductivity increased.

• 한국해안·해양공학회논문집
• /
• 제33권6호
• /
• pp.321-332
• /
• 2021

경사식방파제 상치콘크리트에는 경제적인 이유와 월파의 효과적인 저감을 위해 파라펫이 설치되기도 하지만, 파라펫 설치로 인해 상치콘크리트에는 증가된 파압이 작용하게 된다. 일반적으로 상치콘크리트에 작용하는 파압은 수리실험을 통해 검토되며, 상치콘크리트 설계를 위해서는 파압이 산정되어야 하지만 여전히 불명확한 부분이 있다. 본 연구에서는 상치콘크리트에 작용하는 수평파압 산정을 위해 경사식구조물 형상과 다양한 파랑조건을 적용한 수리실험을 수행하였다. 실험결과를 이용하여 Goda(1974, 2010)의 파압산정식에 적용되는 파압저감계수를 제안하였으며, 테트라포드가 피복된 경사식방파제 상치콘크리트 설계에 실무적으로 적용 가능 할 것으로 기대된다.

• 한국가스학회지
• /
• 제26권4호
• /
• pp.1-8
• /
• 2022

디젤엔진의 대체 연료로 연구되고 있는 청정연료인 DME는 디젤엔진의 중요한 문제 중 하나인 배기가스를 줄일 수 있으며, 세탄가와 산소함유량이 매우 높다. DME는 LPG와 유사한 특성을 가진 연료로 LPG 유통 인프라를 사용할 수 있다. 본 연구에서는 플런저식 고압펌프의 성능평가를 위해 토출된 질량유량에 대한 기초 데이터베이스 구축을 목표로 하였으며, 커먼레일 압력과 모터 회전속도를 변화시켜 플런저식 고압펌프의 질량유량을 분석하였다. 실험 조건은 커먼레일 압력을 300 bar, 400 bar, 500 bar 로 변경하였고, 모터 회전 속도를 300 rpm에서 1000 rpm 으로 증가시켰다. 실험 결과 두 경우 모두 질량유량이 증가하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제12권8호
• /
• pp.1205-1214
• /
• 1999

Whole lupinus albus seeds were pressure toasted at temperatures of 100, 118 and $136^{\circ}C$ for 3, 7, 15 and 30 min to study rumen degradation and post-rumen digestion and to determine optimal heating conditions for the Dutch dairy feed industry. In sacco nylon bag and mobile bag techniques were employed for rumen and intestine incubations to determine ruminal degradation characteristics and intestinal digestion of crude protein (CP) in 4 lactation rumen cannulated and 4 lactating intestinal cannulated Dutch dairy cows fed 47% hay and 53% concentrate according to Dutch dairy requirements. Measured rumen degradation characteristics were soluble fraction (S), undegradable fraction (U), potentially degradable fraction (D), lag time (T0) and rate of degradation (Kd) of insoluble but degradable fraction. Percentage bypass feed protein (BCP), ruminal microbial protein synthesized based on available nitrogen (N_MP) and that based on available energy (E_MP), true protein supplied to the small intestine (TPSI), truly absorbed BCP (ABCP), absorbed microbial protein (AVP) in the small intestine, endogenous protein losses in the digestion (ENDP), true digested protein in the small intestine (TAP or DVE in Dutch) and degraded protein balance (PDB or OEB in Dutch) were totally evaluated using the new Dutch DVE/OEB System. Pressure toasting decreased (p<0.001) rumen degradability of CP. It reduced S (p<0.05) and Kd (p=0.06), increased D (p<0.05) and U (p<0.01) but did not alter T0 (p>0.05), thus resulting in dramatically increased BCP (p<0.001) with increasing time and temperature from 73.7 (raw) up to 182.5 g/kg DM ($136^{\circ}C/15min$). Although rumen microbial protein synthesized based on available energy (E_MP) was reduced, true protein (microbial and bypass feed protein) supplied to the small intestine (TPSI) was increased (p<0.001) from 153.1 (raw) to 247.6 g/kg DM ($136^{\circ}C/15min$). Due to digestibility of BCP in the intestine not changing (p>0.05) average 87.8%, the absorbed BCP increased (p<0.001) from 62.3 (raw) to 153.7 g/kg DM ($136^{\circ}C/15min$). Therefore DVE value of true digested protein in the small intestine was significantly increased (p<0.001) from 118.9 (raw) to 197.0 g/kg DM ($136^{\circ}C/15min$) and OEB value of degraded protein balance was significantly reduced (p<0.001) from 147.2 (raw) to 63.1 g/kg DM ($136^{\circ}C/15min$). It was concluded that pressure toasting was effective in shifting degradation of CP of lupinus albus from the rumen to small intestine without changing intestinal digestion. Further studies are required on the degradation and digestion of individual amino acids and on the damaging effects of processing on amino acids, especially the first limiting amino acids.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권6호
• /
• pp.61-69
• /
• 2000

Indium-Tin Oxide (ITO) films were prepared on the commercial glass substrate by the Magnetron Sputtering method. The target was a 90wt.% $In_2O_3$-10wt.% $SnO_2$with 99.99% purity. The ITO films deposited by changing the partial pressure of oxygen gas ($O_2$/(Ar+$O_2$)) of 2, 3 and 5% as well as by changing the substrate temperature of $300^{\circ}C$ or $500^{\circ}C$. The influence of substrate pre-annealing and pre-cleaning on the quality of ITO film were examined, in which the substrate temperature was $500^{\circ}C$ and oxygen partial pressure was 3%. The characteristics of films were examined by the 4-point probe, Hall effect measurement system, SEM, AFM, Spectrophotometer, and X-ray diffraction. The optimum ITO films have been obtained when the substrate temperature is $500^{\circ}C$ and oxygen partial pressure is 3%. At optimum condition, the film showed transmittance of 81%, sheet resistivity of $226\Omegatextrm{cm}^2$, resistivity($\rho$) of $5.4\times10^{-3}\Omega$cm, carrier concentration of $1.0\times10^{19}cm^{-3}$, and carrier mobility of $150textrm{cm}^2$Vsec. From XRD spectrum, c(222) plane was dominant in the case of substrate temperature at $300^{\circ}C$, without regarding to oxygen partial pressure. However, in the case of substrate temperature at $500^{\circ}C$, c(400) plane was grown together with c(222) plane, only for oxygen partial pressure of 2 and 3%. In both case of chemical and ultrasonic cleaning without pre-annealing the substrate, it showed much almost same sheet resistivity, resistivity($\rho$), transmittance, carrier concentration, and carrier mobility. In case of $500^{\circ}C$/60min pre-annealing before ITO film deposited, both transimittance and carrier mobility are better than no pre-annealing, because pre-annealing is supposed to remove alkari ions diffusion from substrate. ITO film deposited on the Corning 0080 sybstrate showed a little bit better sheet resistivity, resistivity($\rho$), transimittance, carrier concentration than the film deposited on commercial glass. But no differences between Corning substrate and pre-annealed commercial glass substrate are found.