• Current Research on Agriculture and Life Sciences
• /
• 제29권
• /
• pp.29-35
• /
• 2011

The relationship between hydrologic processes and scale is one of the more complex issues in surface water hydrology. Disturbances that change vegetation and/or soil properties have been known to subsequently alter the landscape. The primary objective of this study was to estimate the grain size of soils with different properties from the hydraulic conductivity using pedotransfer functions. The double ring infiltrometer method was used to measure the vertical hydraulic conductivity of three soils under different soil planar surface treatments. Seven selected pedotransfer functions were used to estimate percentile diameters and the reduction in infiltration caused by compaction was misconstrued as caused by changes in percentile diameter. Results showed that compaction on the sandy loamy foot paths reduced the hydraulic conductivity by about 50%. The study showed that perceptual models of infiltration processes and appreciation of scale problems in modeling are far more sophisticated than normally presented in texts. Hydraulic measurement methods are still relevant and will provide significant information of grain size of the soils.

• 한국재료학회지
• /
• 제24권10호
• /
• pp.515-519
• /
• 2014

The aim of this paper is to consider the effect of annealing on the coefficient of thermal expansion (CTE) of electroplated Invar Fe-Ni alloy. The CTE of the as-electroplated alloy is lower than those of alloys annealed at $400^{\circ}C$ and $800^{\circ}C$. XRD peaks become sharper as the as-electroplated alloy is annealed, which means the grain growth. The average grain sizes of as-electroplated and as-annealed alloys at $400^{\circ}C$ and $800^{\circ}C$ are 10 nm, 70 nm, and $2{\mu}m$, respectively, as determined by TEM and EBSD analyses. The CTE variation for the various grain sizes after annealing may come from the magnetostriction effect, which generates strain due to changes in the magnetization state of the alloys. The thermal expansion coefficient is considered to be affected by nano grain size in electroplated Fe-Ni Invar alloys. As grain size decreases, ferromagnetic forces might change to paramagnetic forces. The effect of lattice vibration damping of nano grain boundaries could lead to the decrease of CTE.

• 열처리공학회지
• /
• 제31권2호
• /
• pp.56-62
• /
• 2018

Many researchers have studied on the precipitation control after solution treatment to improve the damping capacity without decreasing the strength. However, studies on the damping capacity and microstructure changes after deformation in the solid solution strengthening alloys were inadequate, such as the Al-Zn series magnesium alloys. Therefore, in order to investigate the effect of annealing condition on microstructure change and damping a capacity of AZ61 magnesium alloy. In this study, it was confirmed that the microstructure changes affect the damping capacity and hardness when annealed AZ61 alloy. AZ61 magnesium alloy was rolled at $400^{\circ}C$ with rolling reduction of 30%. These specimens were annealed at $350^{\circ}C$ to $450^{\circ}C$ for 30-180 minutes. After annealing, microstructure was observed by using optical microscopy, and damping capacity was measured by using internal friction measurement machine. Hardness was measured by Vickers hardness tester under a condition of 0.3 N. In this study, static recrystallization was observed regardless of the annealing conditions. In addition, uniform equiaxed grain structure was developed by annealing treatment. Hardness is decreased with increasing grain size. This is associated with Hall-Petch equation and static recrystallization. In case of damping capacity, bigger grain size show the larger damping capacity.

• Geomechanics and Engineering
• /
• 제2권4호
• /
• pp.303-319
• /
• 2010

The effect of grain crushing on the deformation of sand in 1D compression and 1D creep at high stresses was investigated theoretically and experimentally. An approach was proposed to formulate the process of grain crushing in sand in accordance with the laws of fracture mechanics and energy conservation. With this approach, the relation between the void ratio and the amount of grains crushed in 1D compression was derived. Laboratory test data were used to verify this derived relation. In addition, it was observed that there are similarities in evolution of grain size distribution in 1D compression and 1D creep tests. This implies that the changes in microstructure in sand under 1D compression and 1D creep are comparable.

• Journal of Welding and Joining
• /
• 제18권5호
• /
• pp.55-62
• /
• 2000

A metallurgical model for the phase transformation kinetics at Coarsened Grain Heat Affected Zone(CGHAZ) on the basis of Johnson-Mehl-Avrami equation(JMA equation) was proposed. In this model, the effect of prior austenite grain size on the transformation and the morphological changes of ferrite were considered. Isothermal dilatometer tests were performed to determine the effect of prior austenite grain size (AGS) on the austenite decomposition to ferrite and pearlite in a plain carbon steel. By comparing the calculated volume fraction with measured data, the reliability of the developed model was discussed.

• 소성∙가공
• /
• 제27권6호
• /
• pp.347-355
• /
• 2018

This study investigated the effects of the processing number of multi-axial diagonal forging (MADF) on the microstructural changes of OFC fabricated by MADF processes. The as-extruded OFC was cut to $25mm^3$ cube for the MADF processes. The MADF process consists of plane forging with a thickness reduction of 30% and diagonal forging with a diagonal forging angle of $135^{\circ}$. In order to analyze the microstructural evolutions according to the number of repetitions, 1, 2, 3 and 4 cycles of the MADF process were performed. OFC specimens were successfully deformed without surface cracking for up to 4 cycles of MADF. The grain size, average misorientation and average grain orientation spread (GOS) of MADF processed materials were analyzed using EBSD technique and their Vicker's hardness were also measured. The results showed that MADF process effectively refined the microstructure of OFC with initial average grain size of $84.2{\mu}m$. The average grain sizes of specimens MADF processed for 1, 2, 3, 4 cycles were refined to be $8.5{\mu}m$, $2.2{\mu}m$, $1.5{\mu}m$, $1.1{\mu}m$, respectively. The grain refinement seemed to be saturated when OFC was MADF processed over 2 cycles. In the case of specimens subjected to two or more cycles of MADF, the degree of decrease in average grain size was drastically reduced as the number of cycles increased due to softening phenomena such as dynamic recovery or dynamic recrystallization during processing. The degree of increase in average Vicker's hardness was also dramatically reduced as the number of cycles increased due to the same reason.

• 한국인지과학회:학술대회논문집
• /
• 한국인지과학회 2002년도 춘계학술대회
• /
• pp.111-116
• /
• 2002

The regularity effect for printed word recognition and naming depends on ambiguities between single letters (small grain-size) and their phonemic values. As a given word is repeated and becomes more familiar, letter-aggregate size (grain-size) is predicted to increase, thereby decreasing the ambiguity between spelling pattern and phonological representation and, therefore, decreasing the regularity effect. Lexical decision and naming tasks studied the effect of repetition on the regularity effect for words. The familiarity of a word from was manipulated by presenting low and high frequency words as well as by presenting half the stimuli in mixed upper- and lowercase letters (an unfamiliar form) and half in uniform case. In lexical decision, the regularity effect was initially strong for low frequency words but became null after two presentations; in naming it was also initially strong but was merely reduced (although still substantial) after three repetitions. Mixed case words were recognized and named more slowly and tended to show stronger regularity effects. The results were consistent with the primary hypothesis that familiar word forms are read faster because they are processed at a larger grain-size, which requires fewer operations to achieve lexical selection. Results are discussed in terms of a neurobiological model of word recognition based on brain imaging studies.

• 한국환경복원기술학회지
• /
• 제20권1호
• /
• pp.13-24
• /
• 2017

This study is to provide basic data on ecology and morpho-pedo milieu by analyzing diatom and grain size of Mt. Jeombong forest wetland. Sample was collected from 6 points and named sample 943, 932, 885, 881A, 881b, 849. Sample 934 could not identify diatom, and the soil layer was colluvium deposited by mass-movement process. Layer of sample 932 was developed in the lower velocity environment, and presence frequence of complete diatom was very low. Hydrological situation of sample 855 was analysed in oligosaprobien environments. Sample 881A was meso-saprobic environments, velocity was slow area that inhabit musci bryopsida and sphaerocarpus. Sample 881B was acidic wetland in oligosaprobien environments. Sample 849 was analysed in oligosaprobien environments. The results of soil and diatom analysis are well reflect on wet environments of mountain wetlands and also it will expected to be in the help of environmental changes study of mountain wetlands.

• 한국세라믹학회지
• /
• 제45권9호
• /
• pp.567-571
• /
• 2008

The properties of a grown film by the chemical vapor deposition process depend on the deposition temperature because the deposition mechanism of the CVD film is controlled by the deposition temperature. The preferred orientation of the zrC film changed from (111) to (220) or (200) with an increase of the deposition temperature. The grain size of the ZrC film changes from $0.8{\mu}m$ to $2.5{\mu}m$ in the range of 1350 to $1500^{\circ}C$. The hardness of the deposited ZrC film depended on the preferred orientation and the grain size. The hardness of the ZrC film deposited at $1400^{\circ}C$ was 31 GPa.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권6호
• /
• pp.761-770
• /
• 2014

경기만 남부 지역에 발달되어 있는 수중사구의 형태 특성 및 변화를 알아보고 수중사구의 발달 제어요인을 파악하기 위해서 2004년 9월과 2006년 9월에 고해상도 다중빔음향측심기를 이용한 지형조사와 퇴적학적 조사를 실시하였다. 연구지역은 현재의 조류세기와 퇴적물 특성이 대형 수중사구가 충분히 발달, 유지될 수 있는 조건을 나타내고 있다. 시간에 따른 퇴적물 특성 변화, 즉, 입도의 감소는 초대형 수중사구의 파고를 감소시키고 있어, 입도가 연구지역 내 수중사구 크기 발달에 영향을 미치는 주요 요인임을 나타낸다.