• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.8
• /
• pp.2079-2087
• /
• 1993

The effects of subcooling and natural convection are studied numerically on the melting process of an initially subcooled phase-change medium filled inside a horizontal circular cylinder. It is postulated that melting continues with the tube wall kept at a constant temperature and with the unmelted solid core fixed. Primary emphasis is placed on the evolution of interface morphology, the local/overall heat transfer rate at the tube wall and at the interface, and the structure of natural convection. The numerical results are mainly presented in terms of the Rayleigh and subcooling numbers. As the degree of subcooling intensifies, the melting rate and the movement of the interface are impeded but the interfaces are of similar shape with the passage of time. The heat transfer characteristics are found to be mostly governed by the formation pattern of natural convection in the liquid phase. Good agreement with available experimental data is found.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.53-54
• /
• 2014

This study evaluates engineering properties of mortar using lightweight fine aggregate made by bottom ash discharged air cooling process according to grading. Then we confirm possibility of use as lightweight fine aggregate. Consequently, Mix using bottom ash need additional examination for a change with the passage of time of flow. Also, mix of S indicates similar compressive strength with mix of Plain and 16% decrease of unit weight compared to mix of Plain; while mix of B indicates 10% decrease of compressive strength and 16% decrease of unit weight. Therefore, this study shows that mix of S and B is superior compared with other mix.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.5
• /
• pp.668-677
• /
• 2004

This study examines the effects and influences of fumigation on the antimicrobial treatment of excavated dresses in two different museum settings using chemical composite of Methyl Bromide and Ethylene Oxide. The microbial test indicated that the prewashed samples contained Micrococcus, Bacillus, Staphylococcus, and some unidentified fungi and that the total number of microbes decreased after washing. While it was observed that most germs were removed immediately after fumigation, Bacillus was still found and its number even increased. After 5 months, the number of microbes found in Museum A was smaller than Museum B, which shows that Museum A equipped with better environment control facility was superior to Museum. B in terms of exhibition and preservation of dresses against organic damages. In addition, the result indicates that fumigation is an effective measure against the growth and reproduction of microorganisms, considering that the number of microorganisms decreased after fumigation. The color of test sample showed immediate change after fumigation but color difference became stabilized and decreased with the passage of time. The test samples from both museums showed similar patterns.

• 유체기계공업학회:학술대회논문집
• /
• 2000.12a
• /
• pp.176-183
• /
• 2000

The performance of gas turbines decreases as their operating hours increase. Compressor fouling is the main reason for this time-dependent performance degradation. Airborne particles adhere to the blade surface and results in the change in the blade shape. It is difficult to exactly analyze the mechanism of the compressor fouling because the growing process of the fouling is very slow and the dimension of the fouled depth is very small compared with blade dimensions. In this study, an analytic method to predict the motion of particles and their deposition inside axial flow compressors is proposed. The analytic model takes into account the blade shape and the flow within the blade passage. Comparison of simulation result with field data shows the feasibility of the model. Influence of the particle distribution on the compressor fouling is also examined.

• The korean journal of orthodontics
• /
• v.20 no.1
• /
• pp.103-110
• /
• 1990

Metal brackets were recycled by variable methods for economic reason. Such recycling methods had a great effect on bracket slot width and bonding strength. Therefore, the recycling methods that don't change the properties of original bracket were suggested. In this study, debonded brackets were recycled with 30 kinds of solvents and bracket surfaces were examined by S.E.M. (Super IIIA, ISI International Scientific Instruments, Japan) and Stero Microscope (Sz-Tr, Olympus Tokyo, Japan) methods. The following results were obtained. 1. Thermosetting resin adhesives (eq. $Monolok^{(R)}$, $Concise^{(R)}$) were swelled most in sulfuric acid (assays 95%) and slightly in alcohol groups. 2. The solvent was exchanged every 24 hours during the brackets were recycled with sulfuric acid (assays 95%). As the passage of time, the adhesives were removed more clearly, and after 72 hours adhesives were nearly detached from bracket base. 3. Chemical recycled metal bracket surface showed no irregular structure by S.E.M. method.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.2
• /
• pp.50-59
• /
• 1997

When a front head of train enters a tunnel at a high speed, compression wave is generated at tunnel entrance due to the confinement effect and propagated along the tunnel with sound of speed. The propagated compression wave is reflected at tunnel exit due to abrupt pressure change at passage. The reflected wave is expansion pressure wave. And when the rear head of train goes through the tunnel entrance, another expansion pressure wave is generated and propagated along the tunnel. The pressure drop occurs seriously around train when the two expansion pressure waves come cross on train in the tunnel. In order to reduce the pressure drop, the compression wave front must be controlled because the intensity and magnitude of pressure drop is nearly proportional to that of compression wave at tunnel entrance. This study relates to reduction of the pressure wave gradient with respect to tunnel entrance shape change with various kind of angle and rounding. The results show characteristics of wave propagation in tunnel, usefulness of characteristic curve to estimate proper time domain size in numerical study and measuring time in actual experiment. Also rounding is contributed to improve pressure wave front even if its radius is very small at tunnel entrance. In order to improve of pressure wave front at tunnel entrance, proper angle is prefered to rounding with big radius and an angle of around 14$^{\circ}$ is recommended according to this simulations, And it is expected to reduce additional pressure drop in tunnel when the location and the size of the internal space for attendant equipment are considered in advance.

• Journal of Environmental Science International
• /
• v.23 no.12
• /
• pp.1999-2014
• /
• 2014

A meteo-tsunami occurred along the coastline of South Korea on 31 March 2007, with an estimated maximum amplitude of 240 cm in Yeonggwang (YG). In this study, we investigated the synoptic weather systems around the Yellow sea including the Bohai Bay and Shandong Peninsula using a weather research and forecast model and weather charts of the surface pressure level, upper pressure level and auxiliary analysis. We found that 4-lows passed through the Yellow sea from the Shandung Peninsula to Korea during 5 days. Moreover, the passage of the cold front and the locally heavy rain with a sudden pressure change may make the resonance response in the near-shore and ocean with a regular time-lag. The sea-level pressure disturbance and absolute vorticity in 500 hPa projected over the Yellow sea was propagated with a similar velocity to the coastline of South Korea at the time that meteo-tsunami occurred.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.22 no.2
• /
• pp.182-192
• /
• 1996

In this study, the relationship between wax matrix in lipstick and sweating was investigated by observing the change of size and shape of wax matrix with sweating by Scanning Electron Microscopy (SEM). For observation by SEM, a lipstick sample was frozen in liquid nitrogen, then the oil in the lipstick was extracted out in cold isopropanol($-70^{\circ}C$) for 1-3days. After isopropanol was evaporated, the sample was sputtered with gold, and examined by SEM. When examined the sweated sample by SEM, the change of wax matrix underneath the surface from fine, uniform structure to coarse, nonuniform structure was observed, which was resulted from the caking of surrounding wax matrix. That is, the oil underneath the surface was migrated to the surface of lipstick with sweating, consequently the wax matrix at that region was rearranged into the coarse matrix. In case of flamed lipstick, sweating was delayed and the wax matrix was much coarser than that of unflamed one. Its larger wax matrix at surface region was good for including oil. The effect of molding temperature on sweating was also studied. As the molding temperature was increased, sweating was greatly reduced and the size of wax matrix was increased. It was also found that sweating was influenced with the compatinility of wax and oil. A formula consisting of wax and oil which have good compatibility has a tendency of reduced sweating and increased size of wax matrix. When pigment was added to wax and oil. It was also found that sweating was influenced with the passage of time by observing a thick membrane of wax on surface of lipstick after a month from molding. In case of some lipsticks, the size of wax matrix was altered to bigger or smaller. In conclusion, the structure of wax matrix at the surface region of lipstick was changed with the process of foaming, molding temperature, compatibility of wax and oil, addition of pigment, and the passage of time. In most cases, as the size of wax matrix was increased, sweating was reduced and delayed.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.579-581
• /
• 2003

Recently, the environment of the Ariake Sea, Japan has changed drastically. In this study, the result of sea survey, synchronizing the passage time of the Landsat in August 2002 was collated with the satellite data to develop the evaluating equation for transparency and sea surface temperature (SST). By Applying these equations to 5 satellite images of the same season, the transparency and SST in summer of 1985, 1991, 1996 and 2000 is estimated. Consequently, the transparency had increased until 2000 and then decreased in 2002. The SST, on the other hand, shows no remarkable trend.

• Korean Institute of Interior Design Journal
• /
• v.22 no.5
• /
• pp.152-161
• /
• 2013

This study is about the visual appreciation by sex with the analysis of time range of observing data which was got through observation experiment with the space of lobby in hospitals. The observation data of the subjects who observed the space include the frequency and time, through which the process of visual appreciation could be evaluated with the definition of the frequency and the time of observation. First, the fact that men had higher frequency of observation than women means the former had more movement than the latter, and another fact of their fewer times can be understood as the time of their staying was shorter. That is, even though the men had more movements of sight, they showed the feature of staying shorter. Second, the rate high and low of observation frequency and times made it possible for observation characteristics to be defined as 'intensive search' 'active search' 'fixed concentration' and 'search wandering.' The definition of understanding this process of visual appreciation can be available for a frame of effective analysis of observation characteristics according to the passage of time. Third, the intense search is the case of 'high frequency' having the feature of high visual appreciation owing to the active visual actions for acquiring information. Men were found to have more intense search which decreased gradually as time passed, while women showed the feature of many times of intense search. Fourth, it was found that with many observation data in a certain range of time the subjects had fixed concentration, where women were found to have repetitive fixed concentration along with the change of observation time while men were seen to have more observation tendency for fixed concentration. Fifth, at the cross tabulation of frequency and times, men had the feature of dispersed visual appreciation while women had more distinction between fixation and movement, which revealed that there is surely the difference between men and women in the process of visual appreciation.