• 제목/요약/키워드: change order

검색결과 10,929건 처리시간 0.04초

종속 오차에 대한 분포 변화 검정법 (Test for Distribution Change of Dependent Errors)

  • 나성룡
    • Communications for Statistical Applications and Methods
    • /
    • 제16권4호
    • /
    • pp.587-594
    • /
    • 2009
  • 이 논문에서는 선형회귀모형의 오차항에 대한 변화점 검정 문제를 다룬다. 고정 혹은 변동 모형의 독립 변수와 약한 종속성을 가지는 오차항을 가정하는 관계로 통상적인 중회귀모형뿐만 아니라 ARMA 등의 시계열 모형까지 본 논문에서 포괄한다고 하겠다. 오차항의 분포 변화를 검정하기 위하여 회귀모형의 잔차에 기초한 확률밀도함수 추정값을 이용한다. 적절한 가정하에서 잔차를 이용한 검정이 실제 오차를 이용한 경우와 동일한 극한 분포를 가짐을 보였다.

Analysis of Effect on Seawater Flow Change and Circulation Inside Port Due to the Construction of South Breakwater and Weir at Gamcheon Port

  • Hong, Namseeg
    • 한국해양공학회지
    • /
    • 제34권2호
    • /
    • pp.136-146
    • /
    • 2020
  • In this study, numerical simulations are used to analyze the effect of the south breakwater and weir on seawater flow change and circulation within the Gamcheon port. Flow patterns in the eastern direction are particularly affected by the breakwater during the ebb tide and current velocity is slightly reduced by construction of the weir. Additionally, seawater circulation is reduced by both features. In order to increase seawater circulation, a seawater flux structure is needed on the west breakwater. A weir-type structure will be more efficient than a seawater flux culvert.

Pattern of the University Students' Perception for Unexpected Results and Effect of Problem-Solving Experiments for Change of Perception

  • Lim, Hee-Young;Kang, Seong-Joo
    • 한국과학교육학회지
    • /
    • 제30권3호
    • /
    • pp.366-374
    • /
    • 2010
  • The purpose of this study was grouping students' perception types on the unexpected results in experiments, and looking into how the problem-solving experiment affected the change of these perception types. In order to answer this, interview data were analyzed in terms of perception types, and through analysis of questionnaires carried out at the beginning and the end of the semester, the change of perception types was researched. As a result, perception types of students divided into 'the difference between theory and practice,' 'inexperience of experiment skill,' and 'No reading between lines in manual.' After performing the problem-solving experiment for one semester, the perception of 'the difference between theory and practice' declined, and the desire for 'reading between lines' increased, so the problem-solving experiment influenced on the change of perception positively.

수질변화의 계량화를 위한 비모수적 통계 준거에 관한 연구 (A Study of Non-parametric Statistical Tests to Quantify the Change of Water Quality)

  • 이상훈
    • 환경영향평가
    • /
    • 제6권1호
    • /
    • pp.111-119
    • /
    • 1997
  • This study was carried out to suggest the best statistical test which may be used to quantify the change of water quality between two groups. Traditional t-test may not be used in cases where the normality of underlying population distribution is not assured. Three non-parametric tests which are based on the relative order of the measurements, were studied to find out the applicability in water quality data analysis. The sign test is based on the sign of the deviation of the measurement from the median value, and the binomial distribution table is used. The signed rank test utilizes not only the sign but also the magnitude of the deviation. The Wilcoxon rank-sum test which is basically same as Mann-Whitney test, tests the mean difference between two independent samples which may have missing data. Among the three non-parametric tests studied, the singed rank test was found out to be applicable in the quantification of the change of water quality between two samples.

  • PDF

재해방지를 위한 한국형 생활변화단위 모형의 개발 - 중부지역 거주 기혼 근로자를 중심으로 - (The Development of the Korean Life Change Unit Model for Accident Prevention - Focused on the Married Workers Living in the Middle Area -)

  • 강영식;최만진
    • 한국안전학회지
    • /
    • 제19권3호
    • /
    • pp.118-123
    • /
    • 2004
  • The more the lift environment eastern idea, culture, factory automation system and information technology complicates, the more the various human error brings about. It brings about all kind of accidents and occupational diseases. Also the death and sickness or injury by psychological stress among the human error has increased every year. Therefore this paper describes the Korean lift change unit model through statistical testing with the proposed life change unit factors on the married workers living the middle area. The proposed model can be simply used in order to minimize the industrial accident and human error in real fields. Finally, the result will be helpful for the better safety management.

미립 피복 상변화 물질의 상변화 온도에 대한 연구 (Phase-change Temperature of Micro-encapsulated Phase-change Material)

  • 최은수
    • 설비공학논문집
    • /
    • 제14권2호
    • /
    • pp.168-174
    • /
    • 2002
  • In order to obtain a new heat transfer fluid having a high thermal capacity, micro-capsules of a phase-change material can be a successful candidate to be added into water. In this study, 25, 50, 100, and $200\mu$m diameter micro-encapsulated Lauric acids were tested by a differential scanning calorimeter. The Lauric acid itself had a single freezing curve, but the micro-encapsulated Lauric acid had double freezing curves. The second freezing dominated for $25\mu$m diameter Lauric acids. But the first freeing energy became big as the size of the capsule increased.

원전구조물의 Gr.80 전단철근 사용을 위한 ASME-CC 코드개정에 관한 연구 (ASME-CC Code Change to use the Gr.80 Shear Reinforcement in Nuclear Power Plant Structure)

  • 이병수;임상준
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2015년도 춘계 학술논문 발표대회
    • /
    • pp.9-10
    • /
    • 2015
  • Generally significant reinforcement is used in nuclear power plant structures and may cause potential problems when concrete is poured. In particular pouring concrete into structural member joint area is more difficult than other areas since the joint area is very congested due to the crossed bars and the embedded plates, The purpose of this study is to solve these problems by applying Gr.80(550MPa) shear bars to containment structures of nuclear power plant. In order to apply them to containment structures, it is necessary to change ASME-CC code (ASME Sec.III Div.2). The structural performance tests of wall & beam have been done to compare Gr.80(550Mpa) with Gr.60(420MPa) shear bars. The test results and code change proposal were presented to ASME-CC Committee last year and the discussion for code change will be expected to proceed in the near future.

  • PDF

지하수의 천이흐름을 고려한 지하구조계의 유한요소해석 (Finite Element Analysis of Underground Structural Systems Considering Transient Flow)

  • 김문겸;이종우;박성우
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 1996년도 봄 학술발표회 논문집
    • /
    • pp.103-110
    • /
    • 1996
  • In this paper, behaviour of underground structural systems due to excavation and change of groundwater level is analyzed using finite elements. Equilibrium equations based on the effective pressure theory and transient flow equations considering the groundwater level are derived. Integration equations are derived using Galerkin's approximation and time dependent analysis is employed to compute groundwater level change and pore pressures. This computed pore pressures are employed in equilibrium equations and then finally displacements and stresses are computed. The developed program is applied to analyze the behaviour of ground excavation below the groundwater level. The program is also applied to multi-step excavation at the same model. The results show that the displacements of the ground surface are much influenced by the change of the groundwater level. Therefore, it is concluded that the change of the groundwater level should be considered in order to analyze the behaviour of the underground structural systems accurately

  • PDF

비대선(肥大船)의 항주중(航走中)의 자세변화(姿勢變化)와 형상영향계수(形狀影響係數)에 관(關)하여 (An Experimental Study on Mean Sinkage and Trim Change in Run, and Form Factor of Full Hull Form)

  • 홍성완
    • 대한조선학회지
    • /
    • 제8권1호
    • /
    • pp.29-40
    • /
    • 1971
  • In order to study the problem on form factor of hull form, towing test of a full ship model was carried out for different initial trims under both full and half load conditions. The results were fully discussed on the mutual relations among initial trim, mean sinkage and trim change in run, and form factor. There exists optimum initial trim in regard to form factor. Mean sinkage and trim change in run can be expressed in a uninominal approximation in the form of $k_i{\cdot}{F_n}^{2.2}$. The coefficients of this approxmation are related linearly with the initial trim. Form factor changes according to Froude number. It is considered that the trim change in run is a main reason of the fact.

  • PDF

콘덴사 제어에 있어서 금속화과정이 유도특성에 미치는 영향 (Influence of the Metallization During the Manufacturing of the Ceramic Capacitor on the Dielectric Properties)

  • Ho-Gi Kim
    • 대한전기학회논문지
    • /
    • 제33권2호
    • /
    • pp.83-87
    • /
    • 1984
  • Influence of the metallization during the manufacturing of the ceramic multilayer capacitor on the dielectric properties was studied as a change of the capacity and the dissipation factor. Due to the change of the relative dielectric constant as a function of the measuring temperature the influence of the metallization could be obtained and the change of the dissipation factor as a function of the measuring frequency was anaysed. In order to investigate the boundary effect between the metallization and the dielectric a kind of microstructure model at the internal Grain and Grain Boundary was constructed and tried to analyse the change of the dielectric properties.

  • PDF