• Agricultural and Biosystems Engineering
• /
• v.6 no.2
• /
• pp.70-76
• /
• 2005

Seed, stem and sprout of F. tataricum were separately milled using the ultra fine mill under the same condition to investigate the effect of roasting or extruding on the particle size, microstructure and water solubility of dietary fiber. The mean particle size of MR (roasting) is increased in stem and sprout, and that of ME (extruding) is increased in seed, compared to that of control. The microscopic views of seed show that control has the spherical shape but ME the larger and irregular shape, and those of stem and sprout show that control has the needle like shape but ME more rounded shape. Water solubility index of ME is much higher than that of control or MR in seed, stem and sprout. It shows that seed, stem and sprout are damaged more in extruding than in roasting, and the starch and cell wall structure must be destroyed to change the water insoluble dietary fiber into the water soluble dietary fiber.

• Journal of the Korean Society for Heat Treatment
• /
• v.5 no.3
• /
• pp.149-156
• /
• 1992

Transformation behavior and reversible shape memory effct of Ti-Ni-Cu alloys with various Cu content has been investigated by means of electrical resistivity measurement, differential scanning calorimetry. X-ray diffraction and strain gage sensor. The transformation sequence in Ti-Ni-Cu alloys substituted by Cu for Ni up to 5at.% occurs to $B2{\leftrightarrow}B19^{\prime}$ and it proceeds in two stages by addition of 10 at.%Cu. i.e. $B2{\leftrightarrow}B19{\leftrightarrow}B19^{\prime}$. But the content of Cu increases up to 20at.%, it has been transformed in one stage ; $B2{\leftrightarrow}B19$. The shape change of Ti-40Ni-10Cu alloy which was constrain aged in circular form bended in $B2{\leftrightarrow}B19$ transformation but it spreaded out in $B19{\leftrightarrow}B19^{\prime}$ transformation. The amount of reversible shape change (${\Delta}{\varepsilon}$) of Ti-47Ni-3Cu alloy constrain aged at $400^{\circ}C$ after solution treatment has a maximum value of about $5.6{\times}10^{-3}$, but that of cold rolled and constrain aged specimens exhibits a little value independent of Cu concentrations.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.9
• /
• pp.76-83
• /
• 2021

This study examines the characteristics of spraying conditions based on the change in standoff distance during fine particle spraying while measuring the surface roughness, maximum depth, and maximum width of the sprayed surface. The processing shape of the sprayed surface is analyzed to understand the effects of injection pressure, nozzle diameter, standoff distance, processing shape, processing cycle, processing speed, and injection particles, which are the main factors of fine particle injection processing. Based on the derived characteristics, we attempt to determine the interrelationships of these major factors. The standoff distance is set as a variable factor and a spray machining experiment using a hexagonal shape (from among polygons) instead of square and circular shapes is conducted. Results reveal that research on the characteristics of spraying conditions could be expanded based on changes in the shapes of workpieces.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1992.03a
• /
• pp.11-26
• /
• 1992

In this research, a numerical algorithm has been developed, which can be applied to the large deformation and large displacement contact problems between angle change have been proposed considering the change in geometric shape and rate of contact force. A set of linear simultaneous equations is constructed by adding the geometric shape change and contact conditions to the original stiffness matrix. A new method to determine time increment has been proposed based on Euler method, in which the condition to prevent the contact bodies from penetrating and overrunning each other has been taken into consideration. Practical application to contact problem is extrusion in which bodies are sliding along the contact boundary.

• Journal of the Korean Society for Heat Treatment
• /
• v.5 no.3
• /
• pp.179-185
• /
• 1992

The shape memory effect results from the martensite transfomation of each individual grain. Thus it is necessary to study the texture and its variation. In this study the change of texture during thermal cycling and it's effect on shape memory ability are investigated. The major component of the rolling texture in the parent phase is identified (001) [110], and minor components are (112) [110], (111) [112], {hkl}<100> fiber texture is developed at $45^{\circ}$ from rolling direction. In the case of martensite phase, it is estimated that the major component is (011) [100] and the minor components are (105) [501], (010) [101] and (100) [001]. According to thermal cycling. severity of texture, especially (001) [110] component in parent phase and (011) [100] component in martensite phase are increased. The shape memory ability is increased with increase of thermal cycles and also increased as the direction of specimen approach to $45^{\circ}$ from rolling direction. After first thermal cycling the temperature of transformation can be define clearly and Ms and As are raised by thermal cycling.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1549-1552
• /
• 2003

The front-end side members of automobiles absorb most of the energy in a front-end collision. The front-end side members are required to have a high stiffness together with easiness to collapse sequentially to absorb more impact energy. The axial static collapse test (5mm/mim) was conducted by using UTM with respect to the single hat shaped section members which are the standard section shape of the spot welded section members, to the single cap shaped section members, to the double cap shaped section members and to the double hat shaped section members whose section shape are changed in order to give more stiffness. As a result of test, the energy absorbing characteristic was analyzed for different section shapes. That is, it was analyzed that the change of section shape influenced the absorbing energy, the mean collapse load and the maximum collapse load, and that the relation between the change of section shape and the collapse mode.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.1
• /
• pp.48-52
• /
• 2005

In this paper, the spectral shape invariant real-time voice change method is proposed to change one's voice to mechanical voice. For this purpose, LPC analysis and synthesis is used to maintain the spectraum of voice and the pitch of synthesis speech can be changed freely. In the proposed method, gain matching method is applied to excitation signal generator to make the changed voice natural to hear. In order to evaluate the performance of the proposed method, voice change experiments were conducted. Experimental results showed that original speech signal is changed to the mechanical voice signal in which context of the speaker's voice is conveyed correctly in spite of drastic change of pitch. The system is implemented using TI TMS320C6711DSK board to verify the system runs in real time.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.2
• /
• pp.242-249
• /
• 2017

In this study, the relationship between the shape of a passenger airbag and the possibility of injury is analyzed using the Taguchi method. The optimal shape combination is proposed for a design guideline that can reduce the possibility of injury to the dummy. The airbag FE model for analysis is obtained using a CAD system that can change the shape through several independent variables. The widths of the left / right, top / bottom, and back / forth direction of the airbag shape are set as the design factors, and the effect of the combination injury probability according to the shape is analyzed. The minimum geometric combinations are obtained using the orthogonal array method. The signal to noise ratio is calculated and the optimal shape combination is obtained through sensitivity analysis. The obtained optimal shape combination is compared with the possibility of injury of the initial airbag shape to confirm improved airbag performance.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1260-1265
• /
• 2001

It is important to model the mechanical structure precisely and reasonably in predicting the dynamic characteristics, controlling the vibration, and designing the structural dynamics. In the finite element modeling, the errors can be contained from the physical parameters, the approximation of the boundary conditions, and the element modeling, From the dynamic test. more precise dynamic characteristics can be obtained. Model updating using parameter modification is appropriate when the design parameter is used to analyze the input parameter like finite element method. Finite element analysis for free-free-free-free(FFFF) and clamped-free-free-free(CFFF) plate with uniform area and shape change are carried out as model updating examples, Mass and stiffness matrices are updated by comparing test and analytical modal frequencies. The result shows that the updated frequencies become closer to the test frequencies.

• Journal of the Korean Society of Food Culture
• /
• v.23 no.1
• /
• pp.130-137
• /
• 2008

If we may practice the nutrition education planned on the basis which carefully grasped the inappropriate behavioral determinants of middle-school students, it might be an effective method achieving the change in perception and behavior improving the distorted perception about the ideal body shape, so we are to suggest the 8 week program of body shape perception improvement for successful nutrition education as follows. The body shape perception improvement program is a step-by-step group consulting program. At the introduction stage, we let them understand the meaning of true beauty and body change of teenage period and forming of sexual identity. At the stage of perception conversion, we let them have the opportunity to observe the status of body perception of the teenager and self-observation. At the stage of correction, we let them criticize the distorted body image in the society with mass media at the same time with the self-reflection. At the stage of maintenance and evaluation, we suggested the behavior guidance while preparing it. Setting this as the basis, we applied the contents such as the evaluations through cultural sharing events making somethings while directly participating. As the target groups to practice education were middle school students, we considered the learning level and behavioral features of the middle school students, and composed the programs including the methods such as role play, watching real things, media production, discussions and experiences. If the program of body shape perception improvement developed at this study could be utilized at the field of schools, the teenagers can change their ways of thought naturally avoiding the view about unified appearance rightly perceiving negative self-image that the teenagers can have and if the group consulting can be practiced regularly at each school, many students may experience the change in perception, so it might solicit the improvement of health of the families and local societies as well as that of the individual student.