• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권4호
• /
• pp.302-310
• /
• 2008

This paper puts forward an advanced consideration on the design of scaled multiple-gate FET (MuGFET); the aspect ratio ($R_{h/w}$) of the fin height (h) to fin width (w) of MuGFET is considered with the aid of 3-D device simulations. Since any change in the aspect ratio must consider the trade-off between drivability and short-channel effects, it is shown that optimization of the aspect ratio is essential in designing MuGFET's. It is clearly seen that the triple-gate (TG) FET is superior to the conventional FinFET from the viewpoints of drivability and short-channel effects as was to be expected. It can be concluded that the guideline of w < L/3, where L is the channel length, is essential to suppress the short-channel effects of TG-FET.

• 한국콘텐츠학회논문지
• /
• 제14권10호
• /
• pp.124-136
• /
• 2014

본 연구는 세계에서 유례없이 인구의 고령화가 급속하게 진행되고 있는 우리의 현 상황 속에서, 시니어계층의 삶의 질 확보를 위한 하나의 방안으로 시니어계층 취업활성화를 위한 정책방향에 대하여 연구를 진행하였다. 이를 위하여 미국, 영국, 일본의 법적, 제도적 측면의 정책을 조사하였고, 이를 근거로 시니어계층의 취업활성화와 관련한 기존 정책의 문제점을 법규적 측면, 정책 프로그램적 측면, 사회적 환경측면으로 나누어 살펴보았다. 법규적 측면에서는 정년 나이 제한, 권고조항의 강화, 법규제정 주체의 일원화, 정책 프로그램적 측면에서는 목표설정의 방향조정, 교육프로그램의 운영기간 및 다양화 측면, 운영프로그램간의 네트워크화, 65세 이상으로 교육 대상의 확대, 사회적 환경측면에서는 민간차원에서의 적극적 정책시행 및 시니어계층을 대하는 인식의 변화와 관련한 홍보정책 등을 문제점으로 지적하였으며, 그에 대한 대책을 제안하였다.

• 대기
• /
• 제31권3호
• /
• pp.295-309
• /
• 2021

Diurnal variations of air temperature and relative humidity in the Urban Canopy Layer (UCL) of the Seoul metropolitan area are examined using the Weather Research and Forecasting model coupled with the Seoul National University Urban Canopy Model. The canopy layer air temperature is higher than 2-m air temperature and exhibits a more rapid rise and an earlier peak in the daytime. These result from the multiple reflections of shortwave radiation and longwave radiation trapping due to the urban geometry. Because of the absence of vegetation in the UCL and the higher canopy layer air temperature, the canopy layer relative humidity is lower than 2-m relative humidity. Additional simulations with building height changes are conducted to examine the sensitivities of the canopy layer meteorological variables to the urban canyon aspect ratio. As the aspect ratio increases, net sensible heat flux entering the UCL increases (decreases) in the daytime (nighttime). However, the increase in the volume of the UCL reduces the magnitude of change rate of the canopy layer air temperature. As a result, the canopy layer air temperature generally decreases in the daytime and increases in the nighttime as the aspect ratio increases. The changes in the canopy layer relative humidity due to the aspect ratio change are largely determined by the canopy layer air temperature. As the aspect ratio increases, the canopy layer relative humidity is generally increased in the daytime and decreased in the nighttime, contrary to the canopy layer air temperature.

• 환경생물
• /
• 제40권4호
• /
• pp.455-463
• /
• 2022

기후변화에 따른 산림생태계의 기능 변화를 파악하기 위해 산림생태계의 중요한 기능인 낙엽분해율과 미기상 요인과의 상관관계를 분석하였다. 2017년 1월부터 48개월간 동사면과 서사면에 설치된 낙엽주머니를 통해 낙엽의 분해율을 분석하고 연구지소의 미기상요인(대기온도, 토양온도, 토양수분)을 관측하여 상관관계를 도출하였다. 48개월 경과 후 신갈나무 낙엽의 잔존율은 동사면과 서사면에서 각각 27.1±1.3%, 37.0±3.6%로 감소하였으며, 이에 따른 낙엽의 분해상수(k)는 동사면과 서사면에서 각각 0.33, 0.25로 나타났다. 신갈나무 낙엽의 초기 C/N비율은 38.5이었으며 시간이 경과함에 따라 감소하여 48개월 경과 후 동사면과 서사면의 C/N비율은 각각 13.4, 16.7로 나타났다. 연구지소의 조사기간 동안 평균 대기온도 및 토양온도는 동사면과 서사면에서 각각 8.2±9.0, 9.1±9.3과 8.5±7.4, 9.3±7.3℃로 서사면에서 더 높게 나타났다. 토양수분의 경우, 동사면과 서사면에서 평균 19.4±11.0, 20.5±5.7%로 큰 차이를 보이지 않았으나 연간 변화 양상이 다소 다르게 나타났다. 분석된 낙엽의 분해율과 미기상 요인과의 상관관계를 분석해본 결과, 동사면에서 낙엽분 해율과 토양수분이 양의 상관관계를 갖는 것으로 나타나, 낙엽분해율은 토양수분량에 영향을 받는 것으로 나타났다. 본 연구를 통해 향후 기후변화에 따른 폭우, 폭설 등의 영향이 산림생태계의 기능에 미치는 변화에 대응할 수 있는 기초자료를 제공하고자 한다.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권10호
• /
• pp.491-499
• /
• 2020

The implementation of PPK-BLU in Indonesia was not followed by a comprehensive change in aspects of organization, human resources, and finance. Based on this background, this study aims to provide a comprehensive evaluation of the BTIP after the implementation of the PPK-BLU policy in the implementation of telecommunications services and information to the public in Indonesia. This research used integration of the McKinsey 7S method, Analytical Hierarchy Process, and Likert scale. The integration of these methods can provide a detailed quantitative analysis. Based on the overall evaluation results of carrying out the PPK BLU, BTIP has a performance value of 81.195%, which puts it within the Good category. The McKinsey 7S elements used as a whole have the following values: one aspect is categorized as Very Good, namely, the strategy aspect with a value of 91.025%; two aspects are categorized as Good (structural aspects with a value of 86.857%, and skill aspects with a value of 81.432%); three aspects are categorized as Adequate (style aspect with a value of 76.441%, staff aspect with a value of 78.605%, and share value aspect with a value of 76.331%); one aspect is categorized as Bad, that is the system aspect with a value of 67.503%.

• 한국도로학회논문집
• /
• 제20권3호
• /
• pp.19-26
• /
• 2018

PURPOSES : The main purpose of this study is suggest of field bond strength evaluation method for more objective evaluation method through Evaluation of Bond Strength Properties with changing aspect ratio and temperature. METHODS : The evaluation is laboratory bond strength test. Using the core machine, the pull-off test method ; the bond strength test of interface layer the universal testing machine. RESULTS : As a result of the laboratory bond strength evaluation, it was verified that the bond strength by aspect ratio decreases linearly with increasing aspect ratio and the bond strength properties by temperature change existed at high and low temperature condition relative to odinary temperature condition. CONCLUSIONS : According to the results of laboratory bond strength evaluation, the field bond strength evaluation results suggest applying the proposed correction factor (0.8, 1.0, 1.4, 1.9) according to aspect ratio(0.5, 0.1, 1.5, 2.0), For more objective evaluation of the bond strength, it is analyzed that the evaluation value is within $6{\sim}32^{\circ}C$ and the result can be obtained within 5% of the coefficient of variation.

• 한국IT서비스학회지
• /
• 제10권2호
• /
• pp.223-234
• /
• 2011

Loosely coupled properties of SOA(Service Oriented Architecture) services do not guarantee that service applications always work properly. Service errors may also influence other services of SOA. These characteristics adversely affect software reliability. Therefore, it is a challenge to effectively manage system change and errors for operating services normally. In this study, we propose a SOA based framework using AOP(Aspect Oriented Programming) for reliable service applications. AOP provides a way to manipulate cross-cutting concerns such as logging, security and reliability and these concerns can be added to applications through weaving process. We define a service specification and an aspect specification for this framework. This framework also includes service provider, requester, repository, platform, manager, and aspect weaver to handle changes and exceptions of applications. Independent Exception Handler is stored to exhibited external Aspect Service Repository. When exception happened, Exception Handler is linked dynamically according to aspect rule that is defined in aspect specification and offer function that handle exception alternate suitable service in systematic error situation. By separating cross-cutting concerns independently, we expect that developer can concentrate on core service implementation and reusability, understanding, maintainability increase. Finally, we have implemented a prototype system to demonstrate the feasibility of our framework in case study.

• 오토저널
• /
• 제14권2호
• /
• pp.65-75
• /
• 1992

An analytical scheme for predicting the crack aspect pattern of materials which contain twin surface cracks was developed. Fatigue tests were performed on twin surface cracked PMMA plate specimens to obtain the interaction factor accounting for the interference effect of adjacent cracks. Here, the interaction factor is defined as the ratio of the stress intensity factor for twin surface cracks to that for a single surface crack. From the analysis of the fatigue test result, the interaction factor was presented as the ninth-order polynomial expression having a function of dimensionless crack spacing ratio. Then the polynomial expression was incorporated into the prediction program of the crack aspect pattern for twin surface cracked materials. And, the interaction effect and the coalescence condition of adjacent cracks were simplified in the newly developed prediction scheme of the crack aspect pattern. The predicted crack growth pattern using the prediction scheme was compared with test data from PMMA specimen. The predicted pattern agreed well with the test data.

• 한국생산제조학회지
• /
• 제26권2호
• /
• pp.238-242
• /
• 2017

The effect of crack shape on the leak flow characteristics in pipelinesis investigated using computational fluid dynamics (CFD) simulations. In the present study, two different crack shapes are considered: axial crack andcircumferential crack. The present simulation results showed that under the same crack area, the aspect ratio influences the leak rate. When the aspect ratio is1, the leak rate reaches the minimum value. Moreover, the leak rate in the circumferentialcrack is slightly larger than that in the axial crack. The change in the leak rateaccording to the crack shape could be explained by the different velocitydistributions at the leak position depending on the aspect ratio.

• 한국세라믹학회지
• /
• 제56권3호
• /
• pp.298-301
• /
• 2019

This paper details the synthesis of α-FeOOH (goethite) rods through the reaction of iron (III) nitrate with KOH as a strong base, and shape control of the particles for use as a yellow inorganic pigment. The crystal phase of the α-FeOOH crystal with OH content according to the addition of KOH and the change in morphology were investigated. The optical properties varied with the aspect ratios, and the yellowness increased with increasing aspect ratio. However, the enhanced chromaticity characteristics reversed beyond a certain critical aspect ratio. Thus, the relative optimal aspect ratio of the α-FeOOH rods as a vivid yellow inorganic pigment was derived. The morphology and coloration of the prepared rods were investigated in detail using X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-vis spectroscopy, and CIE Lab color parameter measurements.