• 한국자동차공학회논문집
• /
• 제4권4호
• /
• pp.179-189
• /
• 1996

An unstructured grid finite-volume method has been applied to predict the linear and nonlinear attenuation characteristics of the expansion chamber silencer system. In order to achieve a grid flexibility and a solution adaptation for geometrically silencer system. In order to achieve a grid flexibility and a solution adaptation for geometrically complex flow regions associated with the actual silencers, the unstructured mesh algorithm in context with the node-centered finite volume method has been employed. The present numerical model has been validated by comparison with the analytical solutions and the experimental data for the acoustic field of the concentric expansion chamber with and without pulsating flows, as well as the axisymmetric blast flowfield with open end. Effects of the chamber geometry on the nonlinear wave attenuation characteristics is discussed in detail.

• 동력기계공학회지
• /
• 제14권5호
• /
• pp.71-75
• /
• 2010

Leak detection technology is a challenging research until nowadays, because it has wide and various applications in industry. Furthermore pneumatic component reliability test based on ISO requires air leakage measurement. The conventional measurement methods need a complex operation and the calibration of leak detector. Tracing the history of our study, we proposed a new method for measurement of leak flow rate using isothermal chamber. In this study, propose a simulation model of isothermal chamber by infinitesimal flow -rate, such as a leak flow-rate. The effectiveness of the proposed simulation model is proved by simulation and experimental results. Base on the comparison results, proposed simulation model is good agreement with experimental results.

• 대한전자공학회논문지TC
• /
• 제48권11호
• /
• pp.83-88
• /
• 2011

FDTD 수치해석법을 이용하여 모드가 변화하는 레버버레이션 챔버(RC) 내의 관측 평면내에서 파수 영역에서의 필드값의 계산이 가능하다. 이 필드 값은 RC 내의 모든 여기되는 모드의 방향성을 나타내어 준다. 스터링 효과를 계산하기 위하여 코릴레이션 계수를 구하였으며, 이를 3개의 상이한 스터러의 구조에 적용하여 그 결과를 상호 비교하였다. 이 결과를 통계적인 분석에 의한 표준편차와 비교하여 그 정당성을 입증하였다.

• 물과 미래
• /
• 제26권1호
• /
• pp.71-79
• /
• 1993

공기주입 부유구조물에 대한 압력변화의 비선형 특성과 파랑변형을 이론적 및 실험적으로 검토한다. 섭동법과 Green 공식에 의한 두가지 이론적 방법(방법I, II)이 잠수, 반잠수 부유구조물에 의한 파의 비선형성을 평가하기 위해서 적용된다. 더우기 부유 구조물 내의 공기압 변화를 고려하기 위하여 Boyle-Charles 법칙에 따른 단열변화를 가정하여 유도된 공기압축모델이 새로이 개발되었다. 가상경계에서 감쇠정상파를 고려한 방법 I의 이론치는 감시정상파의 영향이 미치지 않는 가상 연직경계면을 같는 방법 II의 값과 잘 일치한다. 두 이론에 의한 이론치는 실험치와 잘 일치함을 보여준다.

• 한국자동차공학회논문집
• /
• 제7권7호
• /
• pp.42-53
• /
• 1999

Two dimensional flame temperature and KL value distribution from the luminous flame containing soot in a DI diesel engine were measured by the tow-color method using tow different wavelengths of the flame image. The combustion chamber of a DI diesel engine was visualized by elongating the piston and cylinder and the flame in the combustion chamber was photographed on a nega-color film using a high speed camera. In this study, color CCD camera was used to digitize the three color density of the film exposed to the flame and standard lamp . The accuracy of the measuring method depends on the calibration line of film made from a high temperature standard tungsten lamp. The formation and oxidization of soot in the diesel engine were studied by observing measured time history of KL factor and flame temperature . Also , effects of various shapes of combustion chamber and fuel injection on flame temperature. Also, effects of various shapes of combustion chamber and fuel injection on flame temperature and KL value distribution were examined.

• 한국지능시스템학회논문지
• /
• 제20권1호
• /
• pp.48-53
• /
• 2010

본 논문에서는 첨단 IT(Information Technology) 기술을 전통산업인 집진기에 융합한 지능형 원격 집진기 bag 제어 시스템을 이벤트 기반으로 개발하였다. 먼저 전력선 통신을 이용하여 집진기 bag 상태 정보를 효율적으로 전송할 수 있도록 메시지 형식을 정의하였다. 그리고 집진기와 집진기 bag을 논리적으로 모델링하기 위해 자료형을 정의하였고, 이를 이용해 집진기와 집진기 bag을 XML과 객체지향 모델링 기법을 이용해 모델링하였다. 뿐만 아니라 집진기 bag의 교체시기를 정확하게 지능적으로 파악할 수 있도록 사례들을 수집하여 XML로 표현하고, 그 사례를 기반으로 현재 집진기 bag 상태를 사례기반 추론 기법을 이용하여 추론한 후 집진기 bag의 교체시기를 관리자에게 실시간으로 제시하도록 개발하였다.

• 한국환경농학회지
• /
• 제13권3호
• /
• pp.359-372
• /
• 1994

A simplified closed static chamber method was devised for measurement of methane flux from paddy fields. Compared to automatic methane measuring system(AMMS) this chamber method provides availability with moderate costs of setup and maintenance, while it also provides the time-effectiveness compared to other closed top-type chamber method. It accomodates 30 chambers within 2 hours sampling period with two persons. And it provide a rapid and accurate analysis of methane, 30-40 samples per hour. Modified method for $N_2O$ measurements provides a precise and accurate analysis of nitrous oxide without upgrading additional heating zones for gas sampling(switching) valves.

• 한국가구학회지
• /
• 제15권2호
• /
• pp.1-17
• /
• 2004

This paper attempted to review measuring methods of formaldehyde emission from wood-based panel products. Methods included for the discussion were desiccator methods, extraction method, and various chamber methods. First, the procedures and testing conditions of 24-hour desiccator method was critically reviewed, and an improvement of this method was proposed to meet international standards. Two different small chamber methods ($20\ell$ and $1m^3$ chamber methods) were also compared in terms of their advantages and disadvantages. In addition, the regulation levels of formaldehyde emission of wood-based composite panels were compared for different countries. The selection of a reference method of measuring formaldehyde emission of wood panel products should consider the ease of conducting test and cost required. Results should be exchangeable for different methods.

• 한국자동차공학회논문집
• /
• 제3권6호
• /
• pp.30-40
• /
• 1995

Optically accessible D. I. diesel engine with a rectangular combustion chamber was constructed to visualize the behaviors of sprays and flames in the combustion camber with the close conditions of pressure and temperature in an actual engine. The behaviors of sprays and flames in the combustion chamber as the operating conditions of this engine were photographed with high speed camera by Diffused Background Illumination Method. With photographs taken by this method, behavior of spray droplets injected into the combustion chamber, ignition points, and flame propagation were observed and analyzed at a time-and space-dependent fashion.

• 생물환경조절학회지
• /
• 제18권3호
• /
• pp.200-207
• /
• 2009

This study was conducted to analyze the variations of air temperature, relative humidity and pressure in a low pressure chamber for plant growth. The low pressure chamber was composed of an acrylic cylinder, a stainless plate, a mass flow controller, an elastomer pressure controller, a read-out-box, a vacuum pump, and sensors of air temperature, relative humidity, and pressure. The pressure leakage in the low pressure chamber was greatly affected by the material and connection method of tubes. The leakage rate in the low pressure chamber with the welding of the stainless tubes and a plate decreased by $0.21kPa{\cdot}h^{-1}$, whereas the leakage in the low pressure chamber with teflon tube and rubber O-ring was given by $1.03kPa{\cdot}h^{-1}$. Pressure in the low pressure chamber was sensitively fluctuated by the air temperature inside the chamber. An elastomer pressure controller was installed to keep the pressure in the low pressure chamber at a setting value. However, inside relative humidity at dark period increased to saturation level.. Two levels (25 and 50kPa) of pressure and two levels (500 and 1,000sccm) of mass flow rate were provided to investigate the effect of low pressure and mass flow rate on relative humidity inside the chamber. It was concluded that low setting value of pressure and high mass flow rate of mixed gas were the effective methods to control the pressure and to suppress the excessive rise of relative humidity inside the chamber.