• Applied Biological Chemistry
• /
• v.11
• /
• pp.67-76
• /
• 1969

The reduced pressure storage of apple, American Summer Pairman, was investigated comparing with the other storage methods and the following results were obtained. 1. The reduced pressure storage was better to extend the storage life and freshness of apples than the controlled atomoshere storage. 2. Decreasing the pressure of chamber atmosphere to about 20 cmHg showed the best result among several pressure conditions. 3. As for the surface treatment of the apples, poly-ethylene film wrapping showed to be the most favorable method in a short-term experiment. In a long-term experiment, however, poly-ethylene film wrapping seemed to cause apples rot. Poly-vinyl acetate coating seemed to keep the apples from color changing, but it caused an unpleasant odor and a peculiar taste. No significant effect was observed in Gibberellin. 4. Total sugar and reduced sugar of apples were decreased after a certain period of increasing. Acid and Vitamin C, however, gradually decreased from the beginning of storage.

• Journal of the Korean Institute of Gas
• /
• v.21 no.1
• /
• pp.6-17
• /
• 2017

Objectives : The purpose of this study was to obtain information regarding Globally Harmonized System(GHS) classification and health hazards that may result from a 4 weeks inhalation exposure of 3-Methylpentane in Sprague-Dawley rats. Methods : The testing method was conducted in accordance with OECD guidelines for the testing of chemicals No. 412(Subacute Inhalation Toxicity). The Rats were divided into 4 groups(5 male and 5 female rats in each group) and exposed to 0 ppm, 284 ppm, 1,135 ppm, 4,540 ppm 3-Methylpentane in each exposure chamber for 6 h/day, 5 days/week, for 4 weeks. After two weeks, the test animals were autopsied and carried out blood test and biochemical tests and histopathological examination. We used PRISTIMA (Toxicology data management system) to confirm the system and to have confidence of the raw data. Results : No death and particular clinical presentation including weight change and change of feed rate was observed. Relationship between dose, gender and response was also not significantly changed in hematologic examination, biochemical examination of blood and blood coagulation time. The histopathologic lesions caused by the test substance did not appear. Conclusions : NOAEL(No Observable Adverse Effect Level) of 3-Methylpentane is more than 4,540 ppm in male group and female group and the Ministry of Employment and Labor Guidance Announcement No. 2013-37(criteria for the classification marks and Safety of Chemicals) Specific target organ toxicity(repeated exposure) was determined with a substance that is not the separator material.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.12
• /
• pp.1573-1579
• /
• 2013

To test the performance of nuclear fuels, coolant needs to be circulated through the test rig installed in the test loop. Because the pressure and temperature of the coolant is 15.5 MPa and $300^{\circ}C$ respectively, coolant sealing is one of the most important processes in fabricating a nuclear fuel test rig. In particular, 15 instrumentation cables installed in a test rig pass through the pressure boundary, and brazing is generally applied as a sealing method. In this study, an induction brazing system has been developed using a high frequency induction heater including a vacuum chamber. For application in the nuclear field, BNi2 should be used as a paste, and optimal process variables for Ni brazing have been found by several case studies. The performance and soundness of the brazed components has been verified by a tensile test, cross section test, and sealing performance test.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.4
• /
• pp.477-484
• /
• 2000

Objective : Despite advances in the understanding of tumor biology and the tumor immunology, there has been no effective treatment. The Intercellular adhesion molecule-1(ICAM-1) has been shown to be important in interaction involving cells of the immune system and to be upregulated in a number of cell culture systems by cytokines, including immune interferon($IFN-{\gamma}$) and tumor necrosis $factor-{\alpha}$($TNF-{\alpha}$). ICAM-1 has been identified as one of the ligands for lymphocyte function-associated antigen-1(LFA-1). The effectiveness of various cytokines to ICAM-1 induction on cultured human glioblastoma cell lines and potential efficacy of immunotherapy were studied. Method : Human glioblastoma cell lines, U-251 MG, U-373 MG were trypsinized and suspended at $1{\times}10^5cells/ml$ and grown on 8 well chamber slide, the cells were incubated in 0.3ml medium alone or medium containing $IFN-{\gamma}$(1000U/ml) or $TNF-{\alpha}$(250U/ml) or $IFN-{\gamma}$ plus $TNF-{\alpha}$ for 6, 12, 24, 48 and 72 hours. The coverslip were then removed and stained with a 1/30 dilution of anti-ICAM-1 antibody. Result : Surface antigen expression of ICAM-1 was increased by incubating glioblastoma cell lines with $IFN-{\gamma}$ and $TNF-{\alpha}$. Combined effect of $IFN-{\gamma}$ and $TNF-{\alpha}$ has induced more ICAM-1 expression on glioblastoma cell lines. Upregulation of ICAM-1 expression in an established glioblastoma cell line was of greater magnitude and more rapid following incubation with $IFN-{\gamma}$ plus $TNF-{\alpha}$. Surface antigen expression of ICAM-1 was increased for up to 48 hours after cytokine treatment on both cell lines(p<0.05). There was no difference on both cell lines(p>0.05). Conclusion : The results of the present study indicate that ICAM-1 expression in glioblastoma cell lines, U-251 MG and U-373 MG, are induced and enhanced after treatment with $IFN-{\gamma}$ and $TNF-{\alpha}$. Combined effect of $IFN-{\alpha}$ and $TNF-{\gamma}$ is stronger and more rapid than $IFN-{\gamma}$ or $TNF-{\alpha}$ alone.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1452-1458
• /
• 2009

In this paper, Our proposed Multipurpose Complex Card UHF band RFID small-size Tag antenna. Multi purpose Complex Card UHF band RFID small-size Tag antenna that is to minimize the low efficiency of RFID Tag Read Range that generates space limitation and a conductor surrounded by inducing fingerpring system with dual(HF, UHF) Card is presented. Our proposed UHF band RFID small-size Tag antenna is for the Multipurpose Complex Card that is mounted on the fingerpring system as well as the HF Tag. It also enables to minimize and facilitates Tag chip matching by adjusting Tapered, Meander line and Loop structure. Given the card substance properties and periphery circuit, the proposed small-size Tag antenna, in this report, is designed with PET film with size of $50{\times}15mm^2$. The RFID small-size Tag method for measurements is used by EPCglobal Static Test instrument in Anechoic Chamber, which is tested with dual Card, within the car and in wallet. It is found that Read Range is 3.8m from the EPCglobal Static Test, Maximum Read Range within the car from the field test results in 7.6m. Proposed Tag antenna is will be used in the parking control security system.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.2
• /
• pp.162-169
• /
• 2019

Non-destructive freshness measurement using spectroscopy has been carried out several times, but research on freshness and freshness has not been conducted. Therefore the purpose of this study is to develop a system for visually measuring and quantifying the air sack inside the egg by non - destructive method. The experimental environment which designed a small chamber was composed of 850nm band of two IR lasers, IR camera and two servo motors to acquire air sack Images. When the air sack volume ratio is 2.9% or less and the density is 0.9800 or more, the Haugh Unit value is 60 or more It was judged to be a fresh egg of a grade B or higher. These results mean, using the weight measurement, nondestructive decision system, and freshness evaluating algorithm. It can be expected to distinguish grade B or more marketable eggs without using destructive methods.

• Ecology and Resilient Infrastructure
• /
• v.5 no.4
• /
• pp.257-263
• /
• 2018

This study is to develop a GSTM (Green infrastructure Surface Temperature Measurment) equipment for reducing the surface temperature of GI by using LID Method. The tests were conducted including GI products such as Greening block, Pervious Block, Soil Block and so on. The GSTM equipment developed by considering the literature surveys are characterized as follows. The non-contact infrared temperature sensor was used to measure the surface temperature, and it was improved to measure the overall average temperature including the center and the corner temperature of the specimen. The developed GSTM equipment was used to compare performance of asphalt and GI products. As a result, the Greening Block show a high difference of $18.4^{\circ}C$ and it contributes to the decrease of surface temperature.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.4
• /
• pp.4-19
• /
• 2009

Though admitting that, in light of the recent archaeological trend, the excavation on relics of Sam-gama (a sort of kiln steaming the hemp) is increasingly reported, little efforts by far have been made not only to restore its traditional structure design but also to research hardly the change of hemp-steaming technologies in ages. In this regard, this paper shows the exploration of structural method and design as well as operability with regard to Sam-gut, traditional hemp-processing equipment that was recently reconstructed in Jungsun, Kangwon Province. Samgut, generally positioned at the waterside area, is an traditional device for steaming hemp to get bast fibers from the raw material of hemp, principally consisting of HWA-JIP(fire-place) to obtain steams by feeding fire ad Mong-got(boiling chamber) to make the hemp steamed after stacking. More specifically, thick round-logs were piled at the bottom of Hwajip prior to stacking stones around its circumferential area. When the timber positioned below gets burned with high temperature to heat stones existing in the upper side, waters then poured onto it after laying a bundle of grass and soil up to the boiled stones. If so, there generates hot vapor, which is conveyed to Monggot to steam the hemp. Functionally, it is of outstanding importance that Samgut is capable of producing high-temperature water vapors instantaneously under the intensive manpower, thus being constructed achievable for those purposes. The Samgut made by digging the ground is an instant facility that is closed after use. The remains, which were used to generate higher thermal power for steaming hemp, make it hard to excavate the historic traits because there left little vestiges in the soil, which means keen attention must be paid to find out the trace of Smgama relics. Future research stall be focused on collection of broader data regarding Samgut including technological review in extracting bas fibers from the hemp.

• Journal of Korean Society for Quality Management
• /
• v.46 no.4
• /
• pp.843-862
• /
• 2018

Purpose: The purpose of this study was to develop quality innovation techniques specialized for the small and medium-sized businesses. which account for the majority of Korean companies, were having a hard time utilizing the widely recognized quality innovation techniques due to resource constraints. Methods: First, we do review the existing Single PPM and 6 Sigma. And investigate the utilization of these methods including Toyota Production System. Second, we devised a four-step problem-solving methodology based on recent trends in quality innovation such as Simple, Speedy, and Smart. Third, we do survey on frequently used tools for quality innovation. Many opinion leaders including quality consultants and professors answered and gave us valuable comments about our selected quality tools. Finally, we do specify and map tools to each step of PASS. Results: In 2017, 167 companies participated in the quality innovation support business for small businesses according to the Korea Chamber of Commerce & Industry. We conducted performance checks on 167 companies that had completed the "PASS" projects. For the purpose of evaluating improvement performance, the survey was carried out using a structured questionnaire during the field visit of these companies mentioned above. For the reference, 165 out of 167 companies (98.8 % response rate) responded to the questionnaire and conducted performance analysis based on it. According to the survey, 97.6 percent of the respondents were very satisfied with their overall satisfaction with the quality innovation support projects for small and medium sized enterprises in 2017. Also, 93.3 % of the respondents were satisfied with the results of level of the target achievement. As a result, 160 companies (97.0 % of the participating companies) hope to partic ipate in the quality improvement project using "PASS" once again. Conclusion: In this paper, we introduce the new quality innovation methodology, which is named as 'PASS', It could support the long-range business plan of the small and medium-sized businesses to achieve total customer satisfaction resulting in increased market share and improved profit margin. The most small companies can use this "PASS" technique more easily, quickly and most efficiently than their existing known quality innovation techniques such as Six Sigma and Single PPM, etc.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.6
• /
• pp.25-34
• /
• 2011

Dredged and reclaimed ground in progress at the West Coast has a high content of coarse particles. There will be different behaviors depending on the location of outlet and engineering properties of soil when its ground is dredged by a pump. Therefore, the experiments were conducted that were manufactured about the chamber equipment of length 2,650mm, width 770mm, height 735mm, experimented step filling method and water content about 300%, 500% and 700% respectively with SM and ML samples in order to realize segregating sediment characteristics of dredged ground with changing much fine. With results of analysis, ML sample by higher initial water content was reached to the period of complete sedimentation and coefficient of sedimentation consolidation increased with increases of diffusion distance. SM samples showed behavior of coarse soil with diffusion distance 120cm, diffusion distance of more than 120cm showed a similar tendency with ML sample under the influence of fines. In ML sample, it could be also found that lower depth and the more increasing diffusion distance increase in percentage of sieve #200 but water content decreases. In SM sample, it could be also found that coarse soil was piled at near the diffusion distance zone but fine soil was piled at the far diffusion distance zone and prominent difference showed between percentage of sieve #200 and water content(%) by boundary point 120cm~160cm of both samples. Also, shear strength was expressed ML-maximum 2.97kPa, SM-maximum 10.2kPa with diffusion distance.