본 연구는 우리나라 중부지방의 소나무 천연 임분을 대상으로 입지환경별 생장 및 수분생리 특성을 파악하여 합리적인 경영방안을 제시하기 위하여 수행되었다. 연구 대상지의 소나무림은 평균 206.5㎥/ha을 나타냈으며, 각 방위별로 본수, 단면적, 재적 등의 임분 통계량을 보면 북사면에서 남사면으로 갈수록 증가하는 경향을 보이고 있지만 연년생장량과 10년 간의 정기평균 생장량은 반대로 남사면에서 가장 낮은 값을 나타내고 있다. 오후 12∼14시 사이에 측정된 최대 수분포텐셜(Ψ$_{w}$)을 각 방위 및 고도별로 구분하며 분석한 결과 소나무는 북사면에서 남사면으로 가면서 수분포텐셜이 낮아지는 경향을 보였으며, 고도별 수분포텐셜은 상부에서 하부로 가면서 증가하였다. 각 방위별 토양 수분함량은 북사면에서 남사면으로 가면서 감소하는 경향을 나타냈고, 토양 수분함량에 따른 소나무의 수분포텐셜은 고도의 음의 상관관계를 나타냈다. 따라서 연구 대상지의 소나무는 남사면과 능선에서 수분 요구도가 높은데, 이는 이곳에서의 많은 증발량에 따른 수분 결핍에 의한 종내 수분 경쟁의 결과로 판단된다..
본 연구에서는 3차원(3-dimensional, 3D) 프린팅 기술로 출력된 팬톰에 대한 X선 투과성을 평가하고자 하였다. 3D 프린팅 방식은 용융적층조형(fused deposition modeling, FDM) 방식을 이용했으며 소재는 아크릴로나이트릴 뷰타다이엔 스타이렌(acrylonitrile butadiene styrene, ABS)을 사용하였다. 팬톰은 원통 모양으로 설계하였으며 전산화단층영상장비(computed tomography, CT)에서 획득한 단면영상으로 균일도를 측정하였다. X선 투과성 평가는 3D 출력된 팬톰 내부에 이온챔버를 삽입하여 실시하였다. 그 결과, 평균 균일도가 2.70 HU이었으며 기존 폴리메틸 메타크릴레이트(poly methyl methacrylate, PMMA) CT 팬톰과 3D 프린터로 출력된 팬톰에서 측정된 X선 투과성의 상관관계는 0.976로 높은 상관관계가 있는 것으로 나타났다. 향후 3D 프린팅 기술을 이용한 방사선정도관리 팬톰 제작에 기초자료로 활용할 수 있으리라 기대한다.
An investigation is reported on the coating of ZnS:Cu,Cl phosphors by $HfO_2$ using atomic layer deposition method. Hafnium oxide films were prepared at the chamber temperature of $280^{\circ}C$ using $Hf[N(CH_3)_2]_4\;and\;O_2$ as precursors and reactant gas, respectively. XPS and ICP-MS analysis showed the surface composition of coated phosphor powder was hafnium oxide. In FE-SEM analysis, the surface morphology of uncoated phosphors became smoother and clearer as the number of ALD cycle increased from 900 to 1800. The photoluminescence intensity for coated phosphors showed $7.3{\sim}13.4%$ higher than that of uncoated. The effect means that the reactive surface is uniformly coated with stable hafnium oxide to reduce the dead surface layer without change of bulk properties and also its absorptance is almost negligible due to ultrathin(nano-scaled) films. The growth rate is about $1.1{\AA}/cycle$.
The injection nozzle of an electro-hydraulic injector for the common rail Diesel fuel injection system is being opened and closed by movement of a injector's needle which is balanced by pressure at the nozzle seat and at the needle control chamber, at the opposite end of the needle. In this study, the slenoid actuator was considered as a prime movers in high pressure Diesel injector. Namely a solenoid-driven Diesel injector with different driving current types, as a general method driven by solenoid coil energy, has been applied with a purpose to develop the analysis model of the solenoid actuator to predict the dynamics characteristics of the hydraulic component (injector) by using the AMESim code. Aimed at simulating the hydraulic behavior of the solenoid-driven injector, the circuit model has been developed as a unified approach to mechanical modeling in this study. As this analytic results, we know the suction force and first order time lag for driving force can be endowed in solenoid-driven injector in controlling the injection rate. Also it can predict that the input current wave exerted on solenoid coil is the dominant factor which affects on the initial needle behavior of solenoid-driven injector than the hydraulic force generated by the constant injection pressure.
본 연구는 감마선 분광분석법을 이용하여 환경시료에 함유되어 있는 천연방사성 핵종인 라듐($^{226}Ra$) 및 라돈($^{222}Rn$)의 직접분석법의 개발을 목표로 수행되었다. 감마선 분광분석법에 의한 라듐 및 라돈의 분석에서는 주변환경조건에 따라서 변화의 폭이 큰 대기중의 라돈 및 딸핵종에 의한 백그라운드 영향을 소멸시키거나 보정해 주어야만 한다. 본 고에서는 측정함 내부로 질소가스를 흘려주어 측정함 내부를 질소가스 분위기로 바꾸어 줌으로서 대기중의 라돈 및 딸핵종에 의한 불안정한 백그라운드를 소멸시키고자 하였다. 질소가스를 검출기 주위로 흘려주었을 때, 1 MeV 이하의 에너지 영역에 대해서는 80% 그리고 1 MeV 이상에서는 20~50% 정도까지 백그라운드를 감소시킬 수 있었다. 즉, 검출기 주위를 질소분위기로 바꾸어 줌으로서 백그라운드를 소멸, 안정화시킴으로서 검출감도를 약 10배 향상시킬 수 있었다.
추력 10 tonf 액체로켓용 가스발생기를 최적설계하고 설계 검증을 위한 연소 실험을 실시하였다. 연소실에 사용된 인젝터는 F-O-F triplet 충돌형 인젝터 이었으며 추진제는 kerosene/LOX을 사용하였다. 측정된 연소 온도와 압력은 최적 설계에서 얻은 설계 값과 매우 유사한 값을 나타내어 최적설계가 적절히 이루어 졌음을 확인하였다. 그리고 난류 고리를 설치하여 연소가스의 혼합을 촉진시킨 결과, 연소실 압력은 3.2% 감소에 그친 반면, 반경 방향 온도분포는 편차가 15K 이하로 줄어들어 우수한 온도 분포 특성을 나타내었다. 또한 후단부에서 축 방향 온도분포를 측정한 결과 최적 설계로부터 얻은 가스발생기 길이를 10% 줄일 수 있음을 발견하였으며 난류고리의 위치를 적절히 조절한다면 그 이상의 길이 감소도 가능한 것으로 판단하였다.
광전소자용 투명전극으로 적용하기 위한 초박형 Al 박막에 대해서 기초연구를 수행하였다. 증착 전 챔버(chamber) 내 기저압력은 $3{\times}10^{-7}Torr$이하로 유지하였으며 Ar 불활성 기체의 유입을 통해 작업압력을 $1{\times}10^{-2}Torr$로 상승시켜 증착을 실시하였다. DC 마그네트론 스퍼터링법을 이용하여 유리기판상에 Al 박막의 증착을 실시하였으며, 박막의 두께가 3-12 nm인 Al 박막을 각각 형성하였다. 두께가 7 nm 일 때 면저항은 $135{\Omega}/{\square}$로 측정되었고 7 nm 이상인 두께의 박막은 두께가 증가할 때 면저항이 점진적으로 감소되는 경향을 확인할 수 있었다. 두께가 10 nm인 박막의 측정된 면저항은 $13.1{\Omega}/{\square}$로 두께 7 nm인 박막과 비교하였을 때 약 10배의 차이를 확인할 수 있었다. 두께 6 nm 이하인 박막은 면저항 측정이 불가능하였는데 이는 SEM 분석 결과, 연속박막을 이루지 못 하였기 때문이라고 결론을 내릴 수 있었으며, 두께 12 nm인 박막까지 완전한 연속박막이 형성되지 않았다. 각각의 박막에서 입자의 크기는 선 교차법(line intercept method)을 이용하여 시편당 평균 120개의 입자에 대한 평균값을 측정하였으며, 이론적으로 예상할 수 있는 바와 같이 두께가 증가할수록 입자크기도 비례하여 증가하게 되는 것을 확인할 수 있었다. 가시광선 파장영역 내 투과도의 경우, 3 nm 두께에서 평균 80% 이상의 투과도가 측정된 데 반하여, 4-5 nm 두께에서 평균 60%로 급격하게 감소되기 시작하며 그 이후, 두께 증가에 따라 투과도가 점진적으로 감소되는 경향을 확인할 수 있었다. 또한 Al 박막은 시간의 경과에 따른 표면의 산화가 진행되어 기존에 측정된 면저항보다 10-60%의 면저항이 증가하였는데 이는 두께가 얇을수록 더 산화의 영향을 많이 받기 때문에 나타난 결과로 보인다. 추후 산화방지막 및 빛반사방지막 층을 초박형 Al박막과 함께 Oxide/Metal/Oxide 구조로 형성하여 위와 같은 현상들을 해결하고 박막물성의 증진을 통해 투명전극에 적용을 목표로 한다.
BACKGROUND: Hairy ventch (Vicia villosa) is a good green manure for supplying nitrogen in arable soil. Ammonia emission from rice fields can occur, and the degree of this emission can be great. However, quantitative information of ammonia emission from paddy soil using green manure is required to obtain emission factors for rice cropping in Korea. METHODS AND RESULTS: Ammonia emission from flooding soil with different application rate of hairy vetch was measured using the closed chamber method. For this study, hairy vetch was applied at rates of 0 (control), 500 (H500), 1000 (H1000), 2000 (H2000), and 3000 (H3000) kg/ha (fresh matter basis). This experiment was conducted for 54 days under flooding condition. The total NH3 emission throughout the experiment period was 0.32, 0.54, 1.20, 4.20, and 6.20 kg/ha for control, H500, H1000, H2000, and H3000, respectively. The ratio of NH3 emission to applied nitrogen by hairy vetch for each treatment was 0.7, 1.4, 3.2, and 3.2% for H500, H1000, H2000, and H3000, respectively. CONCLUSION(S): A very small amount of ammonia emission was recorded in the present study. Therefore, the use of hairy vetch in paddy field instead of chemical fertilizer can reduce ammonia emissions.
Arefani, Samane;Mehran, Seyyed Mohammad Mohseni;Moladoust, Hassan;Norasfard, Mohammad Reza;Ghorbani, Ahmad;Abedinzade, Mahmood
대한약침학회지
/
제21권2호
/
pp.70-75
/
2018
Objective: Diseases of the respiratory system are one of the main causes of death and include situation such as chronic obstructive pulmonary disease, pneumonia or asthma. Medicinal plants have beneficial effects on multiple diseases include respiratory disorders like asthma and bronchitis. The aim of this study was to evaluate the effects of U. dioica and L. Album on tracheal smooth muscle contraction. Material and methods: Hydroalcoholic extracts of L. Album and U. Dioica aerial parts were prepared by maceration method and standardized based on their total phenol content. The effect of the extracts on the KCl-induced contraction of rat trachea was examined in an organ bath chamber. Data was analyzed with spss software 22. Results: The extract of L. Album (5 mg/ml), similar to theophylline (20 mM), significantly reduced the KCl-induced tracheal contraction. On the other hand, U. Dioica (1 mg/ml and 5 mg/ml) augmented the KCl-induced contraction. Conclusion: The relaxant effect of L. Album on the trachea makes it as a candidate for the managing patients with asthma and obstructive pulmonary diseases. But because of U. Dioica potential constrictive effect on the trachea it is suggested that patients avoid consuming it.
The purpose of this study was to evaluate the effect of several materials on the healing process of apical wound. Sixteen mandibular premolars obtained from 4 healthy dogs were used for this study. Under general anesthesia, the pulpal chamber of each tooth was opened and the pulps were extirpated. The root canals were then instrumented with H-file and irrigated with physiologic saline solution ; the apices were purposely perforated and enlarged with the engine K-reamer. In the experimental groups, apical wounds were filled with one of calcium hydroxide, hydroxylapatite, and tricalcium phosphate materials, mixture of each materials and physiologic saline solution, with a lentulo spiral. In the control group, apical wounds were not filled with any material. All the root canals were filled by the lateral condensation technique with gutta-percha cone and ZOE sealer. The access opening of all the teeth were closed with amalgam. On the 10, 20, 40 and 60th day after experiment, experimental animals were sacrificed. Segments of jaws, each containing one tooth, were fixed in 10% formalin solution and decalcified in Plank-Rychlo solution. The specimens were embedded in paraffin and serially sectioned to an average thickness of $6{\mu}m$. The sections were stained by hematoxylin-eosin and Masson's trichrome stain method and examined under light microscope. The results were as follows : 1. In the experimental groups, the new bone formations were observed in apical wounds. 2. Fourty days later, apical wounds were healed by granulation tissue in the experimental groups, but were not healed by granulation tissue in the control group, and the healing process of experimental groups were more rapid than that of control group. 3. Sixty days later, chronic inflammation disappeared in the experimental groups, and the materials used showed biologic affinity to the periapical tissue. 4. In all the groups, the resorption of cementum appeared on the 10th and 20th day after experiment, and the deposition of cementum appeared on the 40th and 60th day after experiment, especially showing narrowness of apical foramen due to newly formed cementum in calcium hydroxide group. 5. Calcum hydroxide and tricalcium phosphate particles were gradually resolved, but hydroxylapatite particles were not resolved through the experimental period.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.