• 한국추진공학회지
• /
• 제3권4호
• /
• pp.1-11
• /
• 1999

단기액체 하이드라진 ($N_2$$H_4$) 추진제를 사용하는 인공위성 추진시스템의 열적 거동을 기술한다. 운용궤도에서 액체추진제의 동결을 방지하기 위한 열제어 성능이 모사궤도환경하에서 시험, 검증되었다. 궤도 열환경은, 우주환경 모사챔버내에서 흡수열유속법에 의해 구현되었다 흡수열유속법은 추진시스템을 감싸고 있는 위성체 버스패널에 인위적인 가열을 하여 열환경을 모사하는 방법이다. 시간대별로 얻어진 추진계 구성품의 온도분포가 제시되고 이 열적 거동은 각 구성품들의 열제어를 위하여 장착된 비행용 히터의 작동 사이클 수로 변환된다. 작동 사이클 수는 전력으로 환산되어 추진시스템의 열제어를 위하여 운용제도에서 요구되는 총전력량을 예측가능하게 한다. 부가적으로, 인공위성의 열평형상태에서 얻어진 추진계구성품들의 주기적 온도가 설계허용온도와 비교되고 시스템검증의 시각에서 평가된다.

• 한국추진공학회지
• /
• 제19권4호
• /
• pp.61-68
• /
• 2015

초임계 연소에 대한 기초연구로써 축소형 액체 로켓 엔진에서 기체산소/케로신, 기체아산화질소/에탄올 추진제 조합의 정상상태 연소의 분무를 관찰하고 비교하였다. 분무의 가시화에는 shadowgraph 기법을 사용하였으며 실험결과를 분석하기 위해 shadowgraph를 후처리하여 밀도구배강도 이미지를 사용하였다. 정상상태 연소압력이 동일한 조건에서 기체산소/케로신 추진제의 액체 제트 표면의 굴곡이 심하고 분사기 팁 근처에서 급격한 밀도구배를 보이는 것이 관찰되었다. 밀도구배강도의 평균 이미지에서 분무 중심 길이를 도출하였으며 더 낮은 운동량 플럭스 비 조건에서도 기체산소/케로신의 분무중심 길이가 더 짧은 것으로 나타났다.

• The Korean Journal of Physiology and Pharmacology
• /
• 제10권4호
• /
• pp.193-198
• /
• 2006

Many gastrointestinal muscles show electrical oscillation, so-called 'slow wave', originated from interstitial cells of Cajal (ICCs). Thus, a technique to freshly isolate the cells is indispensable to explore the electrophysiological properties of the ICCs. To apply an enzyme solution on the serosal surface for cell isolation, the intestine was inverted and 0.02% trypsin solution and 0.04% collagenase solution were applied to serosal cavity. After the enzyme treatment, mucosal layer was removed and longitudinal muscle layer was gently separated from the rest of tissue. The thin layer was stretched in the recording chamber and mounted on an inverted microscope. Using ${\beta}-escine$, perforated whole cell patch clamp technique was used. Under a microscope, the tissue showed smooth muscle cells and interstitial cells around the myenteric plexus. Under voltage clamp condition, three types of membrane potential were recorded. One group of interstitial cells, which were positive to methylene blue and CD34, showed spontaneous outward current. These cells had bipolar shape and were considered as fibroblast-like cells because of their peculiar shape and arrangement. Another group, positive to c-kit and methylene blue, showed spontaneous inward current. These cells had more rounded shape and processes and were considered as ICCs. The third, positive to c-kit and had granules containing methylene blue, showed quiet membrane potentials under the voltage-clamp mode. These cells appeared to be resident macrophages. Therefore, in the freshly isolated thin tissue preparation, methylene blue could easily identify three types of cells rather than morphological properties. Using this method, we were able to study electrical properties of fibroblast and residential macrophage as well as myenteric ICCs.

• 한국응용과학기술학회지
• /
• 제36권4호
• /
• pp.1410-1419
• /
• 2019

본 연구는 한냉지에서 실외기에 서리가 형성되지 않는 난방이 가능한 히트펌프를 개발하고자 한다. 그래서 실내에서 -25℃의 환경을 제공할 수 있는 항온기 및 실험챔버를 구성하였다. 실험장치 내에 설치된 히트펌프의 실외기 전면에 도달하는 공기의 특성을 파악할 필요가 있어 범용소프트웨어인 ANSYS CFX를 이용하여 유동해석을 하였다. 그 결과 시뮬레이션 조건(5.0~7.0 m/s)의 모든 영역에서 실외기 전방에 도달하는 공기의 유속이 자연상태와 다르게 분포함을 파악하였다. 따라서 실외기 전면에 일정한 공기 유속이 도달할 수 있도록 별도의 공기분배기를 추가 설치할 필요가 있다고 판단된다.

• 한국대기환경학회지
• /
• 제25권1호
• /
• pp.38-45
• /
• 2009

Since the seventies and the oil crisis, energy-saving measures have led to a reduction in the ventilation of room. The use of synthetic materials which emit various chemical substances had led to an increase in the concentration of indoor pollutants. "Sick building syndrome (SBS)" and "Sick house syndrome (SHS)" are worldwide problems. Also, the number of complaints about indoor air pollution caused by VOCs (Volatile organic compound) and HCHO (Formaldehyde) has increased. It is important that evaluating and understanding emission of indoor air pollutant from building materials. The object of this study was to evaluate emission test method for flooring such as wood based flooring, carpet tile, rubber tile, PVC sheet and tile, and to determine emission of TVOC and form-aldehyde. The quantity of TVOC and carbonyl compounds emission were sampled and measured by Tenax TA and gas chromatography/mass spectrometry (GC/MSD), 2,4-DNPH cartrige with ozone scrubber and high performance liquid from flooring. The TVOC concentration emitted from carpet tile was ($7.419\;mg/m^2 h$) the highest among 5 groups of test materials. In wood based flooring and PVC tile, the emitted concentration of toluene was high. And the dodecane emission was highest in carpet. The concentration of TVOC decreased by an increase in emission test period. After 7 days, the concentration of TVOC from floorings were about 50% below of the concentration at the first day. TVOC emission from wood based flooring, carpet tile, rubber tile, PVC sheet and tile were decreased in 28 days and remained steady after about 15 days. The concentration of formaldehyde emission from floorings showed extremely low.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.30-31
• /
• 2006

We have fabricated SmBCO coated conductor on IBAD-MgO substrates using unique co-evaporation method. The batch type co-deposition system was specially designed and named as EDDC(evaporation using drum m dual chamber) that is possible to deposit superconducting layer with different composition ratio at low temperature of $700^{\circ}C$. In this study, we have investigated the influence of SmBCO phase composition and texture of IBAD-MgO template on the critical current density. We have changed the deposition rates of Sm, Ba and Cu during co-evaporation to examine the optimal composition ratio shown better critical current density. The composition ratio and surface morphology of SmBCO coated conductors were analyzed by the EDX and SEM, respectively. A higher critical current density was measured at superconducting phase composition ratio of Ba deficiency, Sm or Cu rich compared to the Sm1Ba2Cu3Ox stoichiometry.

• 한국태양에너지학회 논문집
• /
• 제31권3호
• /
• pp.23-28
• /
• 2011

In this study, the ejector design was modeled using Fluent 6.3 of FVM(Finite Volume Method) CFD(Computational Fluid Dynamics) techniques to resolve the flow dynamics in the ejector. A vacuum system with the ejector has been widely used because of its simple construction and easy maintenance. Ejector is the main part of the desalination system, of which designs determine the efficiency of system. The effects of the ejector was investigated geometry and the operating conditions in the hydraulic characteristics. The ejector consists mainly of a nozzle, suction chamber, mixing tube (throat), diffuser and draft tube. Liquid is supplied to the ejector nozzle, the fast liquid jet produced by the nozzle entrains and the non condensable gas was sucked into the mixing tube. The multiphase CFD modeling was carried out to determine the hydrodynamic characteristics of seawater-air ejector. Condition of the simulation was varied in entrance mass flow rate (1kg/s, 1.5kg/s, 2kg/s, 2.5kg/s, 3kg/s), and position of driving nozzle was located from the central axis of the suction at -10mm, 0mm, 10mm, 20mm, 30mm.. Asaresult, suction flow velocity has the highest value in central axis of the suction.

• Journal of Chest Surgery
• /
• 제10권1호
• /
• pp.148-155
• /
• 1977

The clinical findings with cardioangiography and successful surgical treatment of a 10 year old girl with double-outlet right ventricle is reported at The Dept. of Thoracic and Cardiovascular Surgery, Korea University Hospital, College of Medicine. The patient has been suffered from intermittent cyanosis, palpitation, and exertional dyspnea since 1 year after NFSD, and a holosystolic ejection murmur of grade 4 at the left 3rd intercostal space with mild cyanosis of the lips was the only physical findings at the time of this admission. Cardiac catheterization revealed ventricular septal defect with left to right shunt of 43% and right to left shunt of 10.2%. On cardioangiography from the left ventricle revealed all of the left ventricular outflow shunted into the right ventricle through the large ventricular septal defect, and the aorta originated from the infundibular chamber of the right ventricle with left, anterior sided pulmonary artery. The atria, viscera, and ventricles were normally located, and right ventricular out-flow was narrowed with infundibular hypertrophy and pulmonary valvular stenosis. Surgical correction was accomplished by closure of the ventricular septal defect in such a way that left ventricular outflow was routed via a Teflon felt prosthetic tunnel to the aorta, and pulmonary valvulotomy with infundibulectomy Was done to pass Hegar`s dilator No. 15 for reconstruction of the right ventricular outflow tract. The patient tolerated complete repair and has continued to improve over a period of three months after operation with normal school life. Details of the disease and method of repair are presented with related references.

• International Journal of Aeronautical and Space Sciences
• /
• 제10권2호
• /
• pp.117-124
• /
• 2009

In the environment where various and complicated threat signals exist, RWR (Radar Warning Receiver), which can warn pilot of the existence of threats, has long been a necessary electronic warfare (EW) system to improve survivability of aircraft. The angle of arrival (AOA) information, the most reliable sorting parameter in the RWR, is measured by means of four-quadrant amplitude comparison direction finding (DF) technique. Each of four antennas (usually spiral antenna) of DF unit covers one of four quadrant zones, with 90 degrees apart with nearby antenna. According to the location of antenna installed in helicopter, RWR is subject to signal loss and interference by helicopter body and structures including tail bumper, rotor blade, and so on, causing a difficulty of detecting hostile emitters. In this paper, the performance degradation caused by signal interference by tail rotor blades has been estimated by measuring amplitude video signals into which RWR converts RF signals in case a part of antenna is screened by real tail rotor blade in anechoic chamber. The results show that corruption of pulse amplitude (PA) is main cause of DF error. We have proposed two algorithms for resolving the interference by tail rotor blades as below: First, expand the AOA group range for pulse grouping at the first signal analysis phase. Second, merge each of pulse trains with the other, that signal parameter except PRI and AOA is similar, after the first signal analysis phase. The presented method makes it possible to use RWR by reducing interference caused by blade screening in case antenna is screened by tail rotor blades.

• Journal of Information Display
• /
• 제6권3호
• /
• pp.18-21
• /
• 2005

A new technology for reducing photolithography process from a four step to a three step process in the fabrication of TFT LCD is introduced. The core technology for 3-mask-TFT processes is the lift-off process [1], by which the PAS and PXL layers can be formed simultaneously. A different method of the lift-off process was developed in order to enhance the performance of efficiency with conventional positive and not negative PR which is the generally used in other lift-off process. In addition, the removal capacity of the ITO/PR in lift-off process was evaluated. The evaluation results showed that the new process can be run in conventional TFT production condition. In order to apply this new process in existing TFT process, several tests were conducted to ensure stability of the TFT process. It was found that the outgases from PR on the substrate in ITO sputtering chamber do not raise any problem, and the deposited ITO film beside the PR has conventional ITO qualities. Furthemore, the particles that were produced due to the ITO chips in PR strip bath could be reduced by the existing filtering system of stripper. With the development of total process and design of the structure for TFT using this technology, 3-mask-panels were achieved in TN and IPS modes, which showed the same display performances as those with the conventional 4mask process. The applicability and usefulness of the 3-mask process has already verified in the mass production line and in fact it currently being used for the production of some products.