• Journal of Microbiology and Biotechnology
• /
• v.18 no.6
• /
• pp.1186-1190
• /
• 2008

Single-chain Fv (scFv) antibody against c-Met is expected to be employed in clinical treatment or imaging of cancer cells owing to the important biological roles of c-Met in the proliferation of malignancies. Here, we show that the productivity of scFv against c-Met in Escherichia coli is significantly influenced by the orientation of its variable domains. We generated anti-c-Met scFv antibodies with two different domain orders (i.e., $V_L$-linker-$V_H$ and $V_H$-linker-$V_L$), expressed them in the cytoplasm of E. coli trx/gor deleted mutant, and compared their specific activities as well as their productivities. Productivity of total and functional anti-c-Met scFv with $V_H/V_L$ orientation was more than five times higher than that with $V_L/V_H$ format. Coexpression of DsbC enhanced the yield of soluble amounts of anti-c-Met scFv protein for both constructs. The purified scFv antibodies of the two different formats exhibited almost the same antigen-binding activities. We also compared the productivities and specific activities of anti-c-Met diabodies with $V_H/V_L$ or $V_L/V_H$ formats and obtained similar results to the case of scFv antibodies.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.120.2-120.2
• /
• 2015

We propose a novel direct writing technique with a femtosecond laser enabling selective modification of not only the morphology of conducting polymer thin films but also the orientation and alignment of the polymer crystal. Surface relief gratings resulting from photoexpansion on P3HT:PCBM and PEDOT:PSS thin films were fabricated by femtosecond laser direct writing. The photoexpansion was induced at laser fluence below the ablation threshold of the thin film. The morphology (size and shape) of photoexpansion could be quantitatively controlled by laser writing parameters such as focused beam size, writing speed, and laser fluence. GIWAX results showed that face-on P3HT crystals were largely increased in the photoexpansion in comparison with pristine region of the thin film. In addition, the face-on P3HTs in the photoexpansion were aligned with their orientation along the polarization of the laser. The micro-RAMAN spectra confirmed that neither chemical composition change nor the polymer chain breaking was observable after femtosecond laser irradiation. We believe that this laser direct writing technique opens a new door to the fabrication of more efficient OPVs via non-contact, toxic-free approach.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.240-240
• /
• 2006

Thin films of poly(vinyl cinnamate) (PVCi) were prepared on indium tin oxide (ITO) glass and silicon substrates by conventional spin coating and subsequent drying process. The thicknesses of the films ranged 50-120 nm. The films' surface was treated by rubbing, ultraviolet exposure or their combinations in various ways with changing rubbing strength and exposure dose. These films were examined in detail in the aspects of surface morphology and chain orientation. Further, the anchoring and orientation behaviors of liquid crystals on the film surfaces were investigated. All the results will be discussed in detail.

• Macromolecular Research
• /
• v.9 no.6
• /
• pp.303-312
• /
• 2001

The fabrication of liquid crystal display (LCD) panels involves several thermal processes such as imidization of the alignment layer (AL) and annealing of the rubbed polyimide AL. The nature of these processes on the LC alignment, especially on the pretilt angle (Θ$\_$p/) has been systematically studied, employing various types of polyimide structures. The imidization effect depends on the nature of polyimid precursors; Θ$\^$p/ increases with the degree of the imidization for the main-chain type of ALs, due to the decrease in the surface polarity, but this relation is not applicable to the alkylated ones in which the steric effect at the AL surface by the aliphatic side chains is dominant. Annealing of the rubbed polyimide AL deteriorates its rubbing-induced molecular orientation and subsequently the overlying LC alignment, resulting in the decrease in Θ$\_$p/. Especially, annealing of the LC cell affects the LC-AL interaction as well as the AL orientation and thus its effect on LC alignment depends sensitively on the nature of LC-polyimide interface; aromatic moiety in the polyimide structure gives better thermal stability of LC alignment while fluorinated polyimide ALs induce the less stable alignment.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.2
• /
• pp.151-164
• /
• 2021

The paper identifies the enablers (drivers) and inhibitors (barriers) influencing e-customs implementation in Vietnam (known as a developing country with a lower technological environment) along with determining the impact of e-customs on firm performance. The survey was conducted with the representatives (managers) of firms in five cities and provinces dominating Vietnam's international trade. The data was analyzed using structural equation modeling (SEM). The findings show two significant drivers (enablers) - relative advantages and national culture, while compatibility and ease of use are the barriers. Previous studies showed that cultural dimensions related to 'uncertainty acceptance' and 'individualism' encourage innovation; however, this paper demonstrates that 'uncertainty avoidance' and 'collectivism' promote e-customs deployment in Vietnam. Previously, Vietnamese culture was known for scoring high on cultural dimensions related to 'power distance' and 'short-term orientation'. However, today, as an emerging country, Vietnamese has switched to 'low distance' and 'long-term orientation', especially in terms of e-customs innovation. Additionally, the paper also emphasized that e-customs implementation had a positive influence on firm performance in Vietnam. Based on the results of the paper, policy-makers can devise essential solutions to enhance e-customs implementation as well as managers of firms can set-up strategies to adapt to the modernized environment.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.2
• /
• pp.59-71
• /
• 2009

A great number of companies continue to invest heavily in information technology such as SCM The reasons for this investment vary, but the principal belief is that they will use the technology to gain competitive advantage in today's highly dynamic and changing business market. In order to identify the SCM management performance, this study investigates the impacts of information technology strategy(operation-oriented and market-oriented) on the information technology investment direction(internal system orientation and external system orientation), process innovation level and management performance(non-financial performance and financial performance). This study collected data on-line and off-line from enterprises which implement the supply chain management. The 82 responses were used for the statistical analysis.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.09a
• /
• pp.261-278
• /
• 2003

Concepts.Wafer-Level Chip-Scale Concept with Handling Substrate.Low Accuracy Placement Layout with Isolation Trench.Possible Pitch of Interconnections down to $10{\mu}{\textrm}{m}$ (Sn-Grains).Wafer-to-Wafer Equipment Adjustment Accuracy meets this Request of Alignment Accuracy (+/-1.5 ${\mu}{\textrm}{m}$).Adjustment Accuracy of High-Speed Chip-to-Wafer Placement Equipment starts to meet this request.Face-to-Face Modular / SLID with Flipped Device Orientation.interchip Via / SLID with Non-Flipped Orientation SLID Technology Features.Demonstration with Copper / Tin-Alloy (SLID) and W-InterChip Vias (ICV).Combination of reliable processes for advanced concept - Filling of vias with W as standard wafer process sequence.No plug filling on stack level necessary.Simultanious formation of electrical and mechanical connection.No need for underfiller: large area contacts replace underfiller.Cu / Sn SLID layers $\leq$ $10{\mu}{\textrm}{m}$ in total are possible Electrical Results.Measurements of Three Layer Stacks on Daisy Chains with 240 Elements.2.5 Ohms per Chain Element.Contribution of Soldering Metal only in the Range of Milliohms.Soldering Contact Resistance ($0.43\Omega$) dominated by Contact Resistance of Barrier and Seed Layer.Tungsten Pin Contribution in the Range of 1 Ohm

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.2
• /
• pp.82-101
• /
• 2023

This study is to identify the maintenance service quality of eco-friendly cars, which are rapidly increasing recently. Research is conducted by synthesizing research from the perspectives of internal employees and external customers by using the service profit chain model. Specifically, it is to study the overall structural relationship between internal customer satisfaction, physical quality, interaction quality, outcome quality, external customer satisfaction and long-term orientation. For the study, 202 questionnaires were collected from internal employees and 204 questionnaires from external customers. The results of testing the research hypotheses targeting the internal employee group are as follows. As a result of testing hypothesis 1, internal customer satisfaction has a significant positive (+) effect on physical quality and interaction quality. As a result of testing hypothesis 2, the service quality of eco-friendly car maintenance has a significant positive (+) effect on each other. As a result of testing hypothesis 3, physical quality and outcome quality have a significant positive (+) effect on external customer satisfaction. The results of testing the research hypotheses targeting an external customer group are as follows. As a result of testing hypothesis 2, in the relationship between eco-friendly car maintenance service quality, physical quality has a significant positive (+) effect on interaction quality, and interaction quality has a significant positive (+) effect on outcome quality. As a result of testing hypothesis 3, interaction quality and outcome quality have a significant positive (+) effect on external customer satisfaction. As a result of testing Hypothesis 4, external customer satisfaction has a significant positive (+) effect only on intention to reuse. Finally, as a result of examining the difference in perception between the internal employee group and the external customer group in eco-friendly car maintenance service quality and external customer satisfaction, it was verified that there was a significant difference only in outcome quality and external customer satisfaction.

• Polymer(Korea)
• /
• v.30 no.2
• /
• pp.175-181
• /
• 2006

Hybrid process of thermally-induced phase separation and stretching was developed for the preparation of microporous polypropylene hollow fiber membranes. Precursor for stretching was prepared by using soybean oil as a diluent and benzoic acid as a nucleating agent far the sphenlite control and it was stretched far the micrporous hollow fiber membrane. The effects of stretching ratio and deformation rate for stretching process were investigated. Increase of stretching ratio resulted in the greater pore size with nonuniform size distribution. Higher deformation rate also increaser the pore size with uniform size distribution. Stretching ratio was closely related with the orientation of polymer chain and increased the mechanical strength of the fiber. Increase of deformation rate had little effects on the orientation of crystalline phase, and decreased the orientation of amorphous phase which caused the decrease of tensile strength of the fiber and broke the micro-fibrils connecting spherulites to form a circular pore shape.

• Elastomers and Composites
• /
• v.51 no.2
• /
• pp.113-121
• /
• 2016

Magneto-rheological elastomer (MRE) is a material which shows reversible and various modulus under magnetic field. Comparing to conventional rubber vibration isolator, MREs are able to absorb broader frequency range of vibration. These characteristic phenomena result from the orientation of magnetic particle (i.e., chain-like formation) in rubber matrix. In this study, silicone rubber was used as a matrix of MREs. Carbonyl iron particle (CIP) was used to give magnetic field reactive modulus of MRE. The surface of the CIP was modified with chemical reactants such as silane coupling agent and poly(glycidyl methacrylate), to improve interfacial adhesion between matrix and CIP. The mechanical properties of MREs were measured without the application of magnetic field. The results showed that the tensile strength was decreased while the hardness was increased with the addition of CIP. Also, surface modification of CIP resulted in the improvement of physical properties of MRE, but the degree of orientation of CIP became decreased. The analysis of MR effect was carried out using electromagnetic equipment with various magnetic flux. As the addition of CIP and magnetic flux increased, increment of MR effect was observed. Even though the surface modification of CIP gave positive effect on the mechanical properties of MRE, MR effect was decreased with the surface modification of CIP due to decrease of CIP orientation. Throughout this study, it was found that the loading amounts of CIP affected the mechanical properties of MRE, and surface property of CIP was an important factor on MR effect of MRE.