• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.150.2-150.2
• /
• 2015

In this study, we analyzed the electric and optical characteristics by using various deposition rate ($0.5{\AA}$, $1.0{\AA}$ and $1.5{\AA}/s$) in order to enhance the performance in organic light-emitting devices (OLED). The organic multi-layer structures were deposited with NPB ($500{\AA}$ as hole transport layer), Alq3 ($600{\AA}$ as electron transport layer and emission layer) and LiF ($8{\AA}$ as electron injection layer) via SUNIC PLUS200 on Glass/ITO substrates. In this experiment, we examined the relationship between porous state of organic deposition and mobility of the organic materials. Among the three deposition rates, $0.5{\AA}/s$ achieved the highest performance of (10,786cd/m2, 4.387cd/A) comparing with that of $1{\AA}/s$ (7,779cd/m2, 3.281cd/A) and $1.5{\AA}/s$ (5,167cd/m2, 2.693cd/A). We confirmed that low deposition rate helps to arrange organic materials densely and to move easily another atomic location using inter-chain transporting by orbital overlap.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.129-129
• /
• 2010

The conjugated oligomers with rigid and fused-ring structures are of interest for the solution-processable organic thin film transistors (OTFTs) due to their well defined structure and high purity. In this study, alkyl substituted benzothiophene based oligomers were synthesized by a novel route, the key point of which is the acid-induced intermolecular cyclization reaction of aromatic methyl sulfoxides, and were confirmed by $^1H$-NMR and FT-IR studies. The obtained oligomers showed the good solubility in common organic solvents such as hexane, chloroform, and dimethylchloride at room-temperature, which is due to the introduced alkyl chain. The physical and optical properties of the oligomers were studied using differential scanning scalorimetry (DSC), cyclic-voltammetry (CV), UV-visible and PL spectra studies. Solution processed OTFT device based on synthesized oligomers show a high hole mobility of up to $0.01\;cm^2V^{-1}s^{-1}$, $I_{on}/I_{off}$ of $10^5$ and threshold voltage of -14V.

• Macromolecular Research
• /
• v.17 no.9
• /
• pp.646-650
• /
• 2009

We report the fabrication of pentacene organic field-effect transistors (OFETs) using a fluorinated styrene-alt-maleic anhydride copolymer gate dielectric, which was prepared from styrene derivatives with a fluorinated side chain [$-CH_2-O-(CH_2)_2-(CF_2)_5CF_3$] and maleic anhydride through a solution polymerization technique. The fluorinated side chain was used to impart hydrophobicity to the surface of the gate dielectric and maleic anhydride was employed to improve its wetting properties. A field-effect mobility of 0.12 cm$^2$/Vs was obtained from the as-prepared top-contact pentacene FETs. Since various functional groups can be introduced into the copolymer due to the nature of maleic anhydride, its physical properties can be manipulated easily. Using this type of copolymer, the performance of organic FETs can be enhanced through optimization of the interfacial properties between the gate dielectric and organic semiconductor.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.189-191
• /
• 2014

Todays, with the spread of Mobile devices, game industry has experienced the change of supply chain structure and paradigm. Breaking the traditional supply chain of game industry, mobile games of App. markets provide alternatives or threats against traditional game industry. With the mobility as a strongpoint, mobile games have their own characteristics such as convenience, easy of use and simplicity comparing PC games or other games. In this point, this study is to find success factors of mobiles games through the analysis on the highly ranked favorite games according to the types of mobile games.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.12
• /
• pp.4364-4384
• /
• 2021

The dynamic network state and the mobility of the terminals make the service function chain (SFC) orchestration mechanisms based on static and deterministic assumptions hard to be applied in SDN/NFV mobile edge computing networks. Designing dynamic and online SFC orchestration mechanism can greatly improve the execution efficiency of compute-intensive and resource-hungry applications in mobile edge computing networks. In order to increase the overall profit of service provider and reduce the resource cost, the system running time is divided into a sequence of time slots and a dynamic orchestration scheme based on an improved column generation algorithm is proposed in each slot. Firstly, the SFC dynamic orchestration problem is formulated as an integer linear programming (ILP) model based on layered graph. Then, in order to reduce the computation costs, a column generation model is used to simplify the ILP model. Finally, a two-stage heuristic algorithm based on greedy strategy is proposed. Four metrics are defined and the performance of the proposed algorithm is evaluated based on simulation. The results show that our proposal significantly provides more than 30% reduction of run time and about 12% improvement in service deployment success ratio compared to the Viterbi algorithm based mechanism.

• Macromolecular Research
• /
• v.8 no.1
• /
• pp.1-5
• /
• 2000

The valiclity of the simple mathematical model for facilitated transport in a solid state membrane developed previously has been examined againsts the carrier concentration and membrane thick-ness. Membranes are prepared with copolymer of styrene and 4-vinylpyridine as a matrix and Co(salen) as a carrier. 4-Vinylpyridine is incorporated to provide the coordination site for Co(salen) carrier. Oxygen permeability through the facilitated transport membrane is linearly increased with the square of its thick-ness, as predicted by the mathematical model. However, the oxygen permeability does not increase linearly with the carrier concentration. This seems to be due to the deactivation of the carrier by dimerization at high carrier concentrations as well as the reduced chain mobility by coordination of bulky Co(salen) carrier.

• Proceedings of the KIEE Conference
• /
• 2001.11a
• /
• pp.6-8
• /
• 2001

This report describes the effect of the blending of poly(trifluoropropylmethylvinylsiloxane) (PTFPMVS) with poly(dimethylsiloxane) (PDMS) on the surface properties such as water repellency using dynamic contact angle (DCA) measurement. We have investigated the surface molecular mobility of the PDMS/PTFPMVS blends via a DCA measurement and an adhesion tension relaxation. It could be shown that a flexible side-chain segment in PTFPMVS having higher surface energy, could be reoriented easily in water to decrease the interfacial tension of the polymer/water interface, which seems to play a major role at the decrease of the receding contact angle and the surface resistivity of PDMS/PTFPMVS blends.

• BMB Reports
• /
• v.38 no.6
• /
• pp.690-694
• /
• 2005

Transcription termination of the human mitochondrial genome requires specific binding to termination factor mTERF. In this study, mTERF was produced in E. coli and purified by two-step chromatography. mTERF-binding DNA sequences were isolated from a pool of randomized sequences by the repeated selection of bound sequences by gel-mobility shift assay and polymerase chain reaction. Sequencing and comparison of the 23 isolated clones revealed a 16-bp consensus sequence of 5'-GTG$\b{TGGC}$AGANCCNGG-3' in the light-strand (underlined residues were absolutely conserved), which nicely matched the genomic 13-bp terminator sequence 5'-$\b{TGGC}$AGAGCCCGG-3'. Moreover, mTERF binding assays of heteroduplex and single-stranded DNAs showed mTERF recognized the light strand in preference to the heavy strand. The preferential binding of mTERF with the light-strand may explain its distinct orientation-dependent termination activity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04c
• /
• pp.73-74
• /
• 2008

In this paper, we have investigated dispersibility, volume resistivity of nano-composite by solution mixing method. Dispersibility measured by FE-SEM(Field Emission Scanning Electron Microscope. And volume resistivity measured by ASTM D991. To expect interaction used dual filler system. But, dual filler system had influence on polymer complex. So, polymer chain mobility doesn't resist.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.371-372
• /
• 2006

Poly(${\varepsilon}-caprolactone$) (PCL) is a highly crystalline polymer that is miscible with several amorphous polymers including chlorinated polyether, poly(vinylchloride), poly(hydroxyether) and Bisphenol A polycarbonate. The crystallization behavior of miscible blend of amorphous/crystalline polymers has widely been studied. Generally a depression of the crystallization ability has been found with addition of amorphous component because of the reduction of chain mobility, the change of free energy of nucleation as a result of a specific interaction, and so on [1]. In this work, for the first time, the blend of PCL and copolymer of polyurethane containing polycaprolactone as a soft segment is considered. The structural similarity of TPU soft segment with PCL affects on formation of the miscible component and crystallization behavior of PCL in the blend. This has been studied using differential scanning calorimetry (DSC) and Wide-angle X-ray Scattering (WAXS).