• 한국정밀공학회지
• /
• 제24권6호
• /
• pp.78-85
• /
• 2007

In this study, we performed finite element analysis for the design of a medical centrifuge and two-types of centrifuge were compared with each other. The types of centrifuge are 2-arm straight type and 3-arm type. Structural analysis was done with respect to the change of the rotational speed of the rotor of a centrifuge. When the rotor of centrifuge was rotated, the von Mises stress of 2-arm straight type-rotor was compared with the von Mises stress of 3-arm type. The margin of safety was estimated from the result. We found the critical speed of centrifuge from the campbell diagram by modal analysis.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제8권3호
• /
• pp.8-12
• /
• 2003

The centrifuge test result on capped sediment was compared to the advection- dispersion equation proposed for one layered to predict contaminant transport parameters. The fitted contaminant transport parameters for the centrifuge test results were one to three orders of magnitude greater than the estimated parameters from the advection-dispersion equation. This indicates that the centrifuge model over estimated the contaminant transport phenomena. Thus, the centrifuge provides a non-conservative approach to modeling contaminant transport. It should be also noted that the advection-dispersion equation used in this study is a one layered model. Two layered modeling approaches are more appropriate for modeling this data since there are two layers with different partitioning coefficients. Further research is required to model the centrifuge test using two-layered advection-dispersion models.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1372-1377
• /
• 2008

Recently, centrifuge tests have been widely used as tools in geotechnical engineering researches in domestic and foreign. However, the size of these centrifuge facilities is very large and thus the tests require for long time, high expense, and many labors. In this study, therefore, a small size of instructional centrifuge, which can conduct tests in a short period of time effectively, was introduced. This centrifuge facility introduced in here was developed for geotechnical engineering education for graduate and undergraduate students. The slope stability model having $65^{\circ}$ slope formed with clay was used to investigate the application of the instructional centrifuge by considering experimental procedures and results.

• Geomechanics and Engineering
• /
• 제15권4호
• /
• pp.987-995
• /
• 2018

In this study, a relationship between small-strain shear modulus ($G_{max}$) and overconsolidation ratio (OCR) based on shear wave velocity ($V_S$) measurement was established to identify the stress history of centrifuge model ground. A centrifuge test was conducted in various centrifugal acceleration levels including loading and unloading sequences to cause various stress histories on centrifuge model ground. The $V_S$ and vertical effective stress were measured at each level of acceleration. Then, a sensitivity analysis was conducted using testing data to ensure the suitability of OCR function for the tested cohesionless soils and found that OCR can be estimated based on $V_S$ measurements irrespective of normally-consolidated or overconsolidated loading conditions. Finally, the developed $G_{max}$-OCR relationship was applied to centrifuge models constructed and tested under various induced stress-history conditions. Through a series of tests, it was concluded that the induced stress history on centrifuge model by compaction, g-level variation, and past overburden load can be analysed quantitatively, and it is convinced that the OCR evaluation technique will contribute to better interpret the centrifuge test results.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1254-1259
• /
• 2008

Recently, centrifuge tests have been widely used as tools in geotechnical engineering researches in domestic and foreign. However, the size of these centrifuge facilities is very large and thus the tests require for long time, high expense, and many labors. In this study, therefore, a small capacity(2g ton) of instructional centrifuge, which can conduct tests in a short period of time effectively, was introduced. The results of centrifuge tests conducted on the retaining wall both passive and active cases was used. Medium size of sand was used with sieve off fines in sand using #40 sieve. Based on the test results, this centrifuge facility introduced in here can be enough used for geotechnical engineering education for graduate and undergraduate students.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1473-1478
• /
• 2010

For the cassion type of breakwater under the condition of large wave loads, stability about lateral movement of breakwater was investigated by performing centrifuge model experiments. Prototype of breakwater was modelled by scaling down to centrifuge model and the soft ground reinforced with grouting was also reconstructed in the centrifuge model experiments. Sandy ground beneath breakwater was prepared with a soil sampled in field so that identical value of internal friction angle could be obtained. Centrifuge model experiments were carried out to reconstruct the construction sequence in field. Lateral static wave load was applied to the model caisson after the final stage of construction sequence was rebuilt and the measured lateral movement of caisson was compared with allowable value by the code to assess the stability about lateral movement of the breakwater.

• 한국정밀공학회지
• /
• 제20권9호
• /
• pp.118-125
• /
• 2003

In this study, we carried out the finite element analysis for the screw of centrifuge that is the weakest part of the centrifuge for sewage management. Centrifugal force caused by rotation with velocity of 4000rpm was applied at the screw. Structural analysis was done with respect to the change of the ratio of blade pitch($R_P$), shaft diameter($R_D$) and extended hole($R_E$). When the area of circular hole is equal to that of extended holes, maximum equivalent stresses in the screw with circular and extended circular hole were compared. And then natural frequency analysis was executed for the same model. Three mode shapes were used to explain the vibration characteristics of each screw. Convergence study was accomplished fur more accurate results.

• 한국해양공학회지
• /
• 제38권1호
• /
• pp.30-42
• /
• 2024

This study examined the jack-up spudcan penetration for a new type of offshore wind substructure newly proposed using the jack-up concept to reduce construction costs. The jack-up spudcan for offshore wind turbines should be designed to penetrate a stable soil layer capable of supporting operational loads. This study evaluated multi-layered soil conditions using centrifuge tests: loose sand over clay and loose sand-clay-dense sand. The penetration resistance profiles of spudcan recorded at the centrifuge tests were compared with the ISO and InSafeJIP methods. In the tests, a spudcan punch-through effect slightly emerged under the sand-over-clay condition, and a spudcan squeezing effect occurred in the clay-over-sand layer. On the other hand, these two effects were not critically predicted using the ISO method, and the InSafeJIP result predicted only punch-through failure. Nevertheless, ISO and InSafeJIP methods were well-matched under the conditions of the clay layer beneath the sand and the penetration resistance profiles at the clay layer of centrifuge tests. Therefore, the ISO and InSafeJIP methods well predict the punch-through effect at the clay layer but have limitations for penetration resistance predictions at shallow depths and strong stratum soil below a weak layer.

• 대한임상검사과학회지
• /
• 제51권1호
• /
• pp.78-85
• /
• 2019

막 단백질은 심장질환, 암과 같은 우리 주변에서 흔히 발생하는 질병에 관련되어 있다. 이러한 암과 같은 특정한 질환 상태에서, 막 단백질과 관련된 신호 전달의 비정상은 세포분열을 통제하지 못하고 증가시킬 수 있으며 막 단백질의 발현에 변화가 생긴다. 막 단백질은 지질 이중층으로 이루어진 소수성 환경을 가지고 있어 불안정하기 때문에 막 단백질을 추출해서 연구를 수행하는데 어려움이 있다. 이번 연구에서는 최적화된 막 단백질 추출법을 확인하고자 서로 다른 두 가지 추출법의 효율성을 평가하였다. 두 가지 방법으로, high-speed centrifuge법과 reagent법이 비교되었다. 비교 분석결과, 미토콘드리아 내막 단백질 분석에는 high-speed centrifuge법이 효율적이고, 소포체 막 단백질 분석에는 reagent법이 유용함을 확인하였다. 게다가 유전자 온톨로지 소프트웨어를 이용해서 추출된 막 단백질의 기능분석을 진행하였을 때, 유전자 온톨로지는 reagent법에서 소포체 막 단백질에 연관된 반응이 활성화 되는 것을 확인할 수 있었다. 프로세스 네트워크 분석에서, high-speed centrifuge법에서는 하나의 클러스터를 형성화는 반면, reagent법에서는 네 개의 클러스터를 형성하는 것을 시각화하여 확인하였다. 결론적으로, 두 가지 분석법은 서로 다른 하위 막 단백질의 분석에 유용함을 확인할 수 있었다. 이러한 결과를 토대로, 막 단백질을 분석할 때, 표적의 세부 막 단백질을 고려하여 방법론을 선택하는데 도움을 줄 것으로 기대된다.

• 대한토목학회논문집
• /
• 제26권5C호
• /
• pp.351-358
• /
• 2006

본 연구의 목적은 원심모형실험으로 담수에 따른 CFRD 차수벽의 거동을 모사하는 방법 및 절차를 제시하고, 실험결과로 부터 콘크리트차수벽의 휨강성이 차수벽의 변위에 미치는 영향을 살펴보고, 원심모형실험으로 검증된 수치해석을 통하여 차수벽지지죤 강성이 차수벽콘크리트의 변위와 모멘트에 미치는 영향을 평가하는 것이다. 이를 위하여 실제 운영 중인 D댐에 대해 차수벽의 강성을 2가지로 변화시킨 원심모형실험을 수행하였고, 모형체의 축조재료에 대한 삼축압축실험을 수행하고 그 결과를 입력치로 한 수치해석을 통해 원심모형실험을 모사하였다. 모사된 수치해석 결과를 실험결과와 비교하여 수치모형의 적정성을 확인하고 확인된 수치모형에 대해 지지죤 강성을 변화시킨 수치해석을 수행하여 지지죤 강성변화에 따른 콘크리트 차수벽의 연직변위 및 모멘트 발생 양상을 분석하였다. 차수벽 두께를 2가지로 달리한 원심모형실험 결과, CFRD 차수벽 변위는 차수 목적의 콘크리트 두께 범위 내에서는 두께의 영향이 거의 없는 것으로 나타났다. 원심모형실험과 수치해석 결과로부터 담수 시 CFRD 차수벽의 변위 및 최대변위 발생위치는 콘크리트차수벽 휨강성에는 영향이 거의 없고, 차수벽지지죤의 강성이 큰 영향을 주는 것으로 나타났다.