• Natural Product Sciences
• /
• v.17 no.2
• /
• pp.104-107
• /
• 2011

In order to facilitate the quality control of betaine from the fruits of Lycium chinense, we have developed a rapid and simple method for quantitative determination. Determination was achieved on a Discovery C18 column with an isocratic solvent system of 0.32% perfluoropentanoic acid aqueous-acetonitrile at a flow-rate of 0.5 mL/min and detected an ELSD. The method was reproducible with intra- and inter-day variations of less than 6% (R.S.D). The recoveries were in the range of 90.01~100.05%. The method turned out to be fast and simple, furthermore, to have a good selectivity and sensitivity for the quantity determination of betaine in the fruits of L.chinense.

• Honam Mathematical Journal
• /
• v.30 no.4
• /
• pp.733-741
• /
• 2008

Let T be Gauss transformation on the unit interval defined by T (x) = ${\frac{1}{x}}$ where {x} is the fractional part of x. Gauss transformation is closely related to the continued fraction expansions of real numbers. We show that almost every x is mod M normal number of Gauss transformation with respect to intervals whose endpoints are rational or quadratic irrational. Its connection to Central Limit Theorem is also shown.

• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.13 no.1
• /
• pp.29-41
• /
• 2002

Controlling food materials, is getting more significant in hotel management nowadays as the selling of food beverage continue to rise. F&B managers have been required to have new management of the food materials by a fierce competition, an increase in cost, the shortened span of product life and customer's demand that is becoming more various and sophisticated since Korea was placed under the influence of IMF. I'm going to analyze the factors that cause waste and loss through a series of the process to purchase inspect, store food materials, make a product with that materials and sell the product in order to make more profits by making the circulation of the food materials easier and more efficiently. I studied how 3 chain hotels of A group purchase, store the food materials and control stock. I made up questionnaires about the circulation and control of food materials to 107 cooks in order to know what the cooks who are working at the hotel regard as a real problem and a practical solution. This research indicates that purchasing, producing and selling departments don't establish the mutual connection, a professional purchasing manager is strongly needed and there is difficulty in predicting the proper timing to supply. Also the research shows that A hotel group controls the food materials by analyzing the amount of consumption, stock, setting up the period of validity and uses slowly moving food materials in stock mainly by introducing the menu that aims at four seasons. As a result, the research suggests that we should introduce the concept of food producing factory, as it were, Central Kitchen that is based on the network among various kitchens to improve the flow of the food materials.

• Journal of Magnetics
• /
• v.16 no.3
• /
• pp.294-299
• /
• 2011

Nd-Fe-B high performance magnets were prepared by die-upset forging. The effects of the deformation parameters on magnetic properties and flow stress were studied. Deformation temperatures in the range of $600{\sim}900^{\circ}C$ enable to achieve an effective anisotropy and temperature $800^{\circ}C$ proves to be suitable for deformation of Nd-Fe-B magnets. The amount of c-axis alignment along the press direction seems to depend on the amount of deformation and a saturation behavior is shown at deformation ratio of 75%. Magnetic properties are also related to strain rate, and maximum energy product is attained at an optimum strain rate of ${\varphi}=1{\times}10^{-2}s^{-1}$. By analyzing the relationship of stress and strain at different deformation temperature during die-upset forging process, deformation behavior of Nd-Fe-B magnets was studied and parameters for describing plastic deformation were obtained. Nd-rich boundary liquid phase, which is additionally decreasing the flow stress during deformation, is supposed to play the role of diffusion path and enhance the diffusion rate.

• Journal of the Korean Mathematical Society
• /
• v.46 no.6
• /
• pp.1165-1178
• /
• 2009

In this paper we classify finite groups whose nonnormal subgroups are of order p or pq, where p, q are primes. As a by-product, we also classify the finite groups in which all nonnormal subgroups are cyclic.

• Bulletin of the Korean Mathematical Society
• /
• v.58 no.5
• /
• pp.1193-1208
• /
• 2021

Let 𝓐 be a von Neumann algebra with no central summands of type I₁. In this article, we study Lie n-derivation on von Neumann algebra and prove that every additive Lie n-derivation on a von Neumann algebra has standard form at zero product as well as at projection product.

• Journal of Pharmaceutical Investigation
• /
• v.32 no.3
• /
• pp.185-190
• /
• 2002

To improve the solubility of poorly water-soluble drug and to develop a sustained release tablets, the need for the technique, the formation of solid dispersion with polymeric materials that can potentially enhance the dissolution rate and extent of drug absorption was considered in this study. The 1:1, 1:4, and 1:5 solid dispersions were prepared by spray drying method using PVP K30, ethanol and methylene chloride. The dissolution test was carried out at in phosphate buffer solution at $37^{\circ}C$ in 100 rpm. Solid dispersed drugs were examined using differential scanning calorimetry and scanning electron microscopy, wherein it was found that felodipine is amorphous in the PVP K30 solid dispersion. Felodifine SR tablets were prepared by direct compressing the powder mixture composed of solid dispersed felodipine, lactose, Eudragit and magnesium stearate using a single punch press. In order to develop a sustained-release preparation containing solid dispersed felodipine, a comparative dissolution study was done using commercially existing product as control. The dissolution rate of intact felodipine, solid dispersed felodipine and its physical mixture, respectively, were compared by the dissolution rates for 30 minutes. The dissolution rates of felodipine for 30 minutes from 1:1, 1:4, 1:5 PVP K30 solid dispersion were 70%, 78% and 90%. However, dissolution rate offelodipine from the physical mixture was 5% of drug for 30 minutes. Our developed product Felodipine SR Tablet showed dissolution of 17%, 50% and 89% for 1, 4, and 7 hours. This designed oral delivery system is easy to manufacture, and drug releases behavior is highly reproducible and offers advantages over the existing commercial product. The dissolution rate of felodipine was significantly enhanced, following the formation of solid dispersion. The solid dispersion technique with water-soluble polymer could be used to develop a solid dispersed felodipine SR tablet.

• Nuclear Engineering and Technology
• /
• v.42 no.5
• /
• pp.576-581
• /
• 2010

KAERI (Korea Atomic Energy Research Institute) fabricated MOX (Mixed Oxide) fuel pellets as a cooperation project with PSI (Paul Scherrer Institut) for an irradiation test in the Halden reactor. The MOX pellets were fitted into fuel rods that included instrumentation for measurement in IFE (Institutt for Energiteknikk). The fuel rods were assembled into the test rig and irradiated in the Halden reactor up to 50 MWd/kgHM. The irradiated fuel rods were transported to the IFE, where ceramography was carried out. The fuel rods were cut transversely at the relatively higher burn-up locations and then the radial cross sections were observed. Micrographs were analyzed using an image analysis program and grain sizes along the radial direction were measured by the linear intercept method. Radial cracks in the irradiated MOX were observed that were generally circumferentially closed at the pellet periphery and open in the hot central region. A circumferential crack was formed along the boundary between the dark central and the outer regions. The inner surface of the cladding was covered with an oxide layer. Pu-rich spots were observed in the outer region of the fuel pellets. The spots were surrounded by many small pores and contained some big pores inside. Metallic fission product precipitates were observed mainly in the central region and in the inside of the Pu spots. The average areal fractions of the metallic precipitates at the radial cross section were 0.41% for rod 6 and 0.32% for rod 3. In the periphery, pore density smaller than 2 ${\mu}m$ was higher than that of the other regions. The grain growth occurred from 10 ${\mu}m$ to 12 ${\mu}m$ in the central region of rod 6 during irradiation.

• The Korean Fashion and Textile Research Journal
• /
• v.21 no.5
• /
• pp.574-585
• /
• 2019

The acceleration of digital transformation (DX) has resulted in SNS influencer marketing trends becoming the mainstream of the new market. SNS influencers act as early adopters in the process of new products being accepted. Chinese consumers are most affected by Hallyu, which increases interest in K-beauty products. This study analyzes how K-beauty SNS influencers are related to Chinese consumers. A survey was conducted among Chinese millennial consumers after watching videos provided by K-beauty SNS influencer; subsequently, 456 responses were used for data analysis. As a result, the analysis based on the Elaboration Likelihood Model (ELM) distinguishes the central route and the peripheral route in the process of Chinese consumers accepting new SNS products. The study findings suggested that information quality, credibility, accuracy, and usefulness had significant effects on acceptance intention for new products among central route factors, and similarity, trustworthiness, pleasure, expertise, and attractiveness also had significant effects on the acceptance intention of new product among peripheral route factors. It was found that variables of the central route, rather than those of peripheral route, had stronger effects on the acceptance intention for new products. Consequently, the central route of K-beauty SNS influencer is more important to Chinese consumers' acceptance of new products. It is expected that this study will offer beauty influencer marketing-based cosmetics brands efficient consumer management suggestions.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.240-243
• /
• 1995

This paper describes the process design and forming limit of the forged hinge produec with the axial protrusion on the sheet metal. Process design is consisted of preform and forging process. In this case, the forged hinge product can be formed in a single workpiece without assembling another axial part to it. Process design of the forged hinge product is analyzed by the commercial FEM program. It is known that process design with perform process, shown by the FEM simulaion, can bring the forming limit of the forged hinge product to a great expansion.