• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1058-1065
• /
• 2015

This paper present a current predicting control method for PMSM (permanent magnet synchronous motor) to improve the tracking performance of stator current, which regards the current vector as the control target. Solving the model state equation in the static frame (α-β frame), the dynamic change of current vector will be gained as three independent terms. These change terms, which contain the prediction of current vector, are discretized and simplified by Taylor series expansion and used to get the voltage vector as the predictive control quantity. SVPWM will transform the control voltage to the switching signal of inverter, which is newly deduced for the current vector. Simulation and experiment results are given to testy and verify the performance of this method.

• Journal of the Korean Society of Tobacco Science
• /
• v.27 no.1 s.53
• /
• pp.5-10
• /
• 2005

Studies on effect of Decyl alcohol EC and Butralin EC on tobacco sucker control were conducted in the tobacco field of Agro-tech Research Group of KT&G Central Research Institute, in 2004. Control effects of two chemicals were highest at the sucker length of 1$1\~2cm$. This indicates that the first application of Decyl alcohol should be conducted before button stage in the flue-cured and at the button stage in the burley tobacco. Effects of Decyl alcohol and Butralin on sucker control were $89.6\%\;and\;90.7\%$, respectively at 14 days after application in the variety KF118. But that of sequential application of two chemicals was $81.9\%$ at 30 days after application in the variety KF118 and $86.1\%$ in the variety KB303. Effect of two applications of Yellow ribbon or Butralin was highest in two varieties. The central downward spray showed a little higher control effect than the pouring of two chemicals. There was not significant difference of sucker control effect between forty and fifty times solution of Decyl alcohol in the variety KB303.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.242-248
• /
• 1987

Recently, a quite large number of investigation is published on the subject of Flexible Manufacturing System which can cope with the volatile market demand and the variety of product. Minimum requirement of designing FMS is depicted and by investigating the communication system between the machine tool and the cell control computer, ana between the central computer and the cell control computer, when it is formed as a sub-system of an FEM, the software can be evolved to the control software of the total Flexible Manufacturing System. It is developed the communication system between the central computer and the cell control computer which is the basic structure of the control architecture of FMS under the concept of DNC (Direct Numerical Control). It is used CYBER 180-830 as the central computer, and GMC-1100 computer as the cell control computer, and the main basic program is developed and tested, thus forming a DNC system which can be used in educational environment.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.44
• /
• pp.69-79
• /
• 1997

We investigate both of central and dispersion tendencies of the observed test statistics in control charts in order to judge whether a production process is abnormal or not. In order to do it, first, we study about detection of changes of the population mean as a central tendency The $\bar{x}$ and x control charts are used for detecting the change of the population mean $\mu$. We shows the probability detecting the change of population mean using the $\bar{x}$ and x control charts. Secondly, we study about detection of changes of the population standard deviation as a dispersion tendency in the s control chart. In our studies, for the given several parameters the detection probabilities of changes of central and dispersion tendencies are calculated, the necessary sample size values n are suggested for detecting the changes, and their informations are given as various tables.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.8
• /
• pp.858-860
• /
• 2011

Production of biosurfactant can be substantially increased by the addition of precursors like vegetable oils, petroleum products, and other water-insoluble substances. Pseudomonas Ptm+ strain produces biosurfactant in the presence of hexachlorocyclohexane (HCH), which specifically emulsifies HCH, a recalcitrant organochlorine pesticide. Addition of previously produced crude biosurfactant by the same organism as a precursor instead of HCH increased production of biosurfactants with a decrease in the total fermentation time from 32 to 24 h. The main objective of this paper was to find alternatives for HCH as an inducer.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.1405-1409
• /
• 1990

Generally, the required control functions for the industrial auto trimming sewing machines are the sewing speed control with pedal input, the up/down stopping-position control of the needle, the automatic sewing according to the memorized sewing pattern including the number of stitches, and etc. We developed a new type of AC servo motor controller, which suffices for all the above functions. The developped controller is working well, and the performances are very good for the practical use.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.2
• /
• pp.140-146
• /
• 2005

The on-line optimal control algorithm for central heating system has been researched for minimizing energy consumption while maintaining the comfort of indoor thermal environment in terms of the environmental variables such as indoor heating load and outdoor temperature variation. This study has been done by using TRNSYS Program in order to analyze the central heating system. The optimal control algorithm shows good energy Performances in comparison with the conventional one.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.7 no.2
• /
• pp.30-36
• /
• 2011

In this study, energy saving performance of outdoor temperature reset control strategy for central cooling system is researched by experiments. Outdoor temperature reset control is the control method to change indoor air set temperature according to outdoor air temperature change. The range of indoor air set temperature is represented by the comfort temperature range of indoor air temperature offered from ASHRAE and indoor air set temperature is programmed between $22^{\circ}C$ and $27^{\circ}C$ by outdoor air temperature $20^{\circ}C{\sim}32^{\circ}C$ in summer. As a result of applying outdoor temperature reset control to central cooling system, the suggested control method shows better performances of energy savings than the conventional method which indoor temperature maintains constantly.

• International Journal of Aeronautical and Space Sciences
• /
• v.13 no.2
• /
• pp.210-220
• /
• 2012

The model-free control of aeroelastic vibrations of a non-linear 2-D wing-flap system operating in supersonic flight speed regimes is discussed in this paper. A novel continuous robust controller design yields asymptotically stable vibration suppression in both the pitching and plunging degrees of freedom using the flap deflection as a control input. The controller also ensures that all system states remain bounded at all times during closed-loop operation. A Lyapunov method is used to obtain the global asymptotic stability result. The unsteady aerodynamic load is considered by resourcing to the non-linear Piston Theory Aerodynamics (PTA) modified to account for the effect of the flap deflection. Simulation results demonstrate the performance of the robust control strategy in suppressing dynamic aeroelastic instabilities, such as non-linear flutter and limit cycle oscillations.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.12 no.4
• /
• pp.8-14
• /
• 2016

In this study, the effects of prediction and reset control of outdoor air temperature on energy consumption for central heating system are researched by using TRNSYS program package, and the control performances with the suggested methods of prediction and reset control of outdoor air temperature are compared with the existing ones. As a result, the value of coefficient of determination $R^2$ for the predicted outdoor temperatures is improved and the suggested control method shows maximum 21.8% energy saving in comparison with existing control ones.