• 한국환경과학회지
• /
• 제18권11호
• /
• pp.1225-1234
• /
• 2009

The aim of this research was to apply experimental design methodology in the optimization condition of electrochemical oxidation of Rhodamine B(RhB). The reactions of electrochemical oxidation were mathematically described as a function of parameters amounts of current, NaCl dosage, pH and time being modeled by the use of the central composite design, which was used for fitting quadratic response surface model. The application of response surface methodology using central composite design(CCD) technique yielded the following regression equation, which is an empirical relationship between the removal efficiency of RhB and test variable in actual variables: RhB removal (%) = 3.977 + 23.279$\cdot$Current + 49.124$\cdot$NaCI - 5.539$\cdot$pH - 8.863$\cdot$time - 22.710$\cdot$Current$\cdot$NaCl + 5.409$\cdot$Current$\cdot$time + 2.390$\cdot$NaCl$\cdot$time + 1.061$\cdot$pH$\cdot$time - $0.570{\cdot}time^2$. The model predicted also agree with the experimentally observed result($R^2$ = 91.9%).

• Journal of the Korean Statistical Society
• /
• 제27권1호
• /
• pp.133-152
• /
• 1998

The central composite design is widely used in the response surface analysis, because it can fit the second order model with small experimental points. In practice, the experimental data are not always obtained on all the points. When there are missing observations, many problems due to the missing cells can occur. In this paper, the influence of a missing cell on the central composite design is discussed. First, the influences of a missing cell on the variances of estimated regression coefficents are compared as $\alpha$ varies. Second, how the average predition variance is affected by a missing sell is discussed. And the influence on rotatability is investigated. Third, the influence of a missing cell on optimality, especially on D-optimality and A-optimality, is examined.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2009년도 춘계학술대회
• /
• pp.423-427
• /
• 2009

This study proposes the generation mechanism of various design matrix using generalized linear model for design of experiment. Design generation method of GLM analysis, factorial design(FD) with center points, ANOVA design with lack-of-fit test, and response surface design are introduced. In central composite(CC) design, orthogonal blocking and fractional factorial design(FFD) are presented. We compare the design of Box-Benhken(BB) and face-centred central compsite design.

• 품질경영학회지
• /
• 제49권1호
• /
• pp.31-45
• /
• 2021

Purpose: A noncentral composite design method is to be developed to explore farther region for the first factorial design. A general guideline for sequential experimentation is provided. Methods: (1) A non-overlapping noncentral composite design (NNCD) is developed, in which the second factorial design shares one design point that indicates the best response value in the first factorial design. (2) Four composite designs are compared in terms of the four design evaluation criteria, which are D-, A, G, and I-optimality. (3) A follow-up design strategy is suggested based on the interaction effect, direction of improvement, number of factors. Results: (1) NNCD and model building method are presented, which is useful for exploring farther region from first factorial design block. (2) The performances of the four composite designs are compared. (3) A follow-up design strategy is suggested. Conclusion: (1) NNCD will be useful to explore farther region for the first factorial design. (2) A follow-up design strategy can be beneficial to the experimental practitioners for product and process design and improvement.

• Steel and Composite Structures
• /
• 제48권6호
• /
• pp.625-639
• /
• 2023

In this paper, a Taguchi-based finite element method (FEM) has been proposed and implemented to assess optimal design parameters for minimum static deflection in laminated composite plate. An orthodox mathematical model (based on higher-order shear deformation plate theory and Green-Lagrange geometrical nonlinearity) has been used to compute the nonlinear central deflection values of laminated composite plates according to Taguchi design of experiment via a self-developed MATLAB computer code. The lay-up scheme, aspect ratio, thickness ratio and the support conditions of the laminated composite plate structure were designated as the governable design parameters. Analysis of variance (ANOVA) is used to investigate the effect of diverse control factors on the nonlinear static responses. Moreover, regression model is developed for predicting the desired responses. The ANOVA revealed that the lay-up scheme alongside the support condition plays vital role in minimizing the central deflection values of laminated composite plate under uniformly distributed load. The conformity test results of Taguchi analysis are also in good agreement with the numerical experimentation results.

• 한국기계가공학회지
• /
• 제14권3호
• /
• pp.85-91
• /
• 2015

The press-fit shaft is an important part used in automobiles, vessels, and trains. This study proposes an optimized design method to reduce damage that may occur in the press-fitted shaft by modifying the shape of the boss step of the press-fitted shaft. To reduce the time and cost of running the optimized design method, an approximate design optimization is applied and an optimized algorithm is generated using a genetic algorithm that is widely used in engineering fields and an approximate model using a response surface method. The planned experiments for the data that are needed to generate the approximate model use a central composite design (CCD) and Latin hypercube sampling (LHS), and the results of the approximate optimization using the above two design of experiments are to be compared.

• Steel and Composite Structures
• /
• 제28권1호
• /
• pp.39-49
• /
• 2018

The concrete bridge decks are usually precast and in-situ assembled with steel girders with post-pouring joint in the construction practice of super-wide steel-concrete composite beam. But the difference of concrete age between the precast slabs and the post-pouring joint has been not yet considered for the long-term performance analysis of this kind composite beam. A simply supported precast-assembled T-shaped beam was taken as an example to analyze the long-term performance of steel-concrete composite beam with post-pouring joint. Based on the deformation coordination conditions of the old-new concrete deck and steel girder, a theoretical model for the long-term behavior of precast-assembled composite beam is proposed in this paper according to age-adjusted effective modulus method. Then, the feasibility of the proposed model is verified by the available test data from the Gilbert's composite beams. Parametric studies were preformed to evaluate the influences of the cross-sectional area ratio of the post-pouring joint to the whole bridge deck, as well as the difference of concrete age between the precast slabs and the post-pouring joint, on the long-term performance of the composite beam. The results indicate that the traditional method without considering the age difference would seriously underestimate the effect of creep and shrinkage of concrete bridge decks. The concrete age difference between the precast slabs and the post-pouring joint should be demonstrated for the life cycle design and long-term performance analysis of precast-assembled steel-concrete composite beams.

• 한국시뮬레이션학회논문지
• /
• 제23권3호
• /
• pp.11-17
• /
• 2014

중심합성계획(CCD)은 2차 선형 모형을 추정하기 위해서 자주 활용된다. 본 연구는 CCD를 활용하는 시뮬레이션 실험에서 공통난수(CRN) 상관유도전략을 사용하여 모형의 파라미터를 효율적으로 추정하고자 한다. CCD의 축점을 적절히 선택하면 모든 표본점에 공통난수를 할당하는 전략으로 얻은 파라미터의 가중최소자승(WLS) 추정량은 정규최소자승(OLS) 추정량과 일치한다. 본 연구는 선형모형의 파라미터를 추정하는 공통난수 상관유도전략이 파라미터 추정 효율성 측면에서 독립 난수 할당전략보다 우수함을 계량적으로 분석하였다. 2차 선형모형에서 상수항을 제외한 나머지 파라미터를 추정하는데 있어서 공통난수 상관유도전략이 우수하며 시뮬레이션 결과도 이러한 분석을 지지하고 있다. 제안된 난수 할당전략이 CCD 시뮬레이션 실험에서 유용하게 활용될 수 있을 것으로 기대한다.

• 한국해양공학회지
• /
• 제34권4호
• /
• pp.253-262
• /
• 2020

This study provides a comparative analysis of experiments-based enhancements and sensitivity evaluations for the structural design of an automatic ocean salt collector under various load conditions. The sizing variables of the structural members were considered as design factors. The strength and weight performances were selected as output responses. The design of experiments used in the comparative study consisted of the orthogonal array design, Box-Behnken design, and central composite design. The response surface model, one of the metamodels, was applied to the approximate model generation. The design enhancement performance metrics, including numerical costs and weight minimization, according to the design of experiments, were compared from the best design case results. The central composite design method showed the most enhanced design results for the structural design of the automatic ocean salt collector.

• 대한기계학회논문집A
• /
• 제24권3호
• /
• pp.661-666
• /
• 2000

Optimization of the elastic joint of train is performed according to the minimization of ten responses which represent driving safety and ride comfort of train and analyzed by using the each response se surface model from stochastic design of experiments. After the each response surface model is constructed, the main effect and sensitivity analyses are successfully performed by 2nd order approximated regression model as described in this paper. We can get the optimal solutions using by nonlinear programming method such as simplex or interval optimization algorithms. The response surface models and the optimization algorithms are used together to obtain the optimal design of the elastic joint of train. the ten 2nd order polynomial response surface models of the three translational stiffness of the elastic joint (design factors) are constructed by using CCD(Central Composite Design) and the multi-objective optimization is also performed by applying min-max and distance minimization techniques of relative target deviation.