• 화약ㆍ발파
• /
• 제25권1호
• /
• pp.31-43
• /
• 2007

현재 대부분의 국내 터널은 천공발파 기법을 이용하여 굴착되고 있다. 심발발파는 터널굴착면의 1 자유면 상태에서 가장 먼저 발파가 이루어지므로 터널발파에서 가장 중요한 단계이며 전체의 굴진효율과 진동 및 소음을 결정하는 역할을 한다. 여기서는 기존의 V-Cut 공법의 시공 편의성을 최대한 활용하면서 굴진효율을 개선시킨 새로운 심발발파 방법인 SAV-Cut (Stage Advance V-Cut) 공법을 소개한다. SAV-Cut 공법은 건설교통부에서 지정하는 건설 신기술(제518호)으로서 중앙공을 천공 및 선기폭하여 암반을 약화시킨 다음 경사공을 단계별로 기폭하는 것을 주요 특징으로 하고 있다. SAV-Cut 발파공법의 메커니즘을 수치해석과 여러 현장에 실제 적용을 통하여 검증하였고, 발파효율의 증대와 진동저감 효과를 확인하였다.

• 화약ㆍ발파
• /
• 제36권4호
• /
• pp.16-25
• /
• 2018

터널 굴착시 지반진동을 감소시키기 위해 굴착면에 부분적인 자유면을 형성하고 제어발파를 수행하는 자유면 발파공법이 적용되어 왔다. 본 연구에서는 다이어몬드 와이어 쏘를 이용하여 인공절리를 심발부에 형성하고, 심발부 발파 시 발생되는 지반진동을 비교함으로써 인공절리에 의한 지반진동 감소를 평가하였다. 해석 결과, 일반 심발발파보다 인공절리 심발발파에서 지반진동이 감소하였으며, 수직 인공절리 심발발파보다 수평 인공절리 심발발파에서의 지반진동 감소 효과가 더 크게 평가되었다.

• Journal of Animal Science and Technology
• /
• 제63권3호
• /
• pp.614-625
• /
• 2021

This study investigates how visual appearance of pork cuts affects consumer preference. Images of pork belly, Boston butt, and loin were chosen on the basis of visible fattiness and used to analyze consumers' perception of the appearance of each pork cut. Meat color and visible fat proportion of images of pork cuts were analyzed by the researchers before conducting the survey. A total of 211 pork eaters evaluated the pork cuts based on appearance (lightness of color, redness, visible fat proportion, and fat distribution), preferability, and overall acceptability. Also, muscle pieces from different pork cuts were taken and the relative area composition of muscle fibers was measured. Based on survey results, correlation between visual traits and preferences of each pork cut was analyzed. The survey results showed that preferred pork appearance varied as per each individual's favorite pork cut. Also, the respondents evaluated visual characteristics and preference for each pork cut differently possibly due to the different visual characteristics of each cut. Correlation analysis between visual traits and preference indicated that overall acceptability of pork cuts was mainly influenced by fat preference, followed by color preference. Fat and color preferences for each pork cut were affected by various visual attributes including redness, lightness of color, visible fat proportion, and fat distribution, but their effects were considerably varied among different pork cuts. Thus, Korean consumers perceived and assessed pork appearance using various quality cues but the evaluation depended on which cut was being observed.

• 한국물환경학회지
• /
• 제25권2호
• /
• pp.221-226
• /
• 2009

We investigated the most effective cutting interval for underwater nutrient removal through cut off the emergent part of hydrophytes at artificial vegetation island (AVR) which was installed for the purpose of water quality improvement in Lake Paldang. We divided the planting area of Phragmites japonica into three parts according to the cutting intervals. The shoot height and relative growth rate of P. japonica, nutrient contents and biomass of cut off P. japonica were measured at each cutting interval. The amount of nutrients which were removed through cut off at each cutting interval was calculated. P. japonica showed full growth, 80% and 60% of full growth before first cut off at three-months, two-months and one-month cutting interval condition respectively. Three-month cutting interval condition showed the largest biomass of cut off P. japonica and one-month cutting interval condition showed the least. However the cut off P. japonica showed the highest content of nutrients at one-month cutting interval condition and the least at three-month cutting interval condition. The amount of phosphorus and nitrogen removal at two-month cutting off condition is the largest among three cutting interval conditions indicating that cut off the emergent part of P. japonica every two months is the most effective to remove the nutrients from water at AVR in eutrophic lakes.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권5호
• /
• pp.682-686
• /
• 2016

A fully differential RC calibrator for accurate cut-off frequency of a programmable channel selection filter is proposed. The proposed RC calibrator consists of an RC timer, clock generator, synchronous counter, digital comparator, and control block. To verify the proposed RC calibrator, a six-order Chebyshev programmable low-pass filter with adjustable 3 dB cut-off frequency, which is controlled by the proposed RC calibrator, was implemented in a $0.18-{\mu}m$ CMOS technology. The channel selection filter with the proposed RC calibrator draws 1.8 mA from a 1.8 V supply voltage and the measured 3 dB cut-off frequencies of the channel selection LPF is controlled accurately by the RC calibrator.

• 한국기계가공학회지
• /
• 제11권3호
• /
• pp.98-103
• /
• 2012

One of the problems in the grinding process using the machining center(MC) with a small diametric wheels is machining error due to decrease of the quill diameter. In this thesis, side-cut grinding is performed with a vitrified bonded CBN wheel on the machining center to establish the basis of the grinding using MC. The grinding force and machining error are investigated experimentally for the change of the machining condition. It is possible to estimate the machining performance by the ratio of the setting depth of cut and actual depth of cut. In addition, the relation between normal grinding force and machining error is presented by the experimental formula.

• Geomechanics and Engineering
• /
• 제30권5호
• /
• pp.423-435
• /
• 2022

Ground vibration generated repeatedly in blasting tunnel excavation sites is known to be one of the major hazards induced by blasting operations. Various studies have been conducted to minimize these hazards, both theoretical and empirical methods using electronic detonator, the deck charge method, the center-cut method among others Among these various existing methods for controlling the ground vibration, in this study, we investigated the cut method. In particular, we analyzed and compared the V-cut method, which is commonly used in tunnel blasting, to the double-drilled parallel method, which has recently been introduced in tunnel excavation site. To understand the rock fragmentation efficiency as well as the ground vibration controllability of the two methods, we performed in-situ field blasting tests with both cut methods at a tunnel excavation site. Additionally, numerical analysis by FLAC3D has been executed for a better understanding of fracture propagation pattern and ground vibration generation by each cut method. Ground vibration levels, by PPVs measured in field blasting tests and PPVs estimated in numerical simulations, showed a lower value in the double-drilled parallel compared with the V-cut method, although the exact values are quite different in field measurement and numerical estimation.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.181-181
• /
• 2012

The microwave probe for measuring plasma density is widely used for its advantages: First, it is not affected by the reactive gas. Second, it can measure local plasma parameters such as plasma density, plasma potential and plasma temperature. Third, it is simple and robust. A cut-off probe is the one of the most promising microwave probe. Recently, Kim et al. reveals the physics of the cut-off probe but the effect of the sheath on the determination of the plasma density is not explained. In this presentation, for taking account of sheath effects on determination of plasma density from the cut-off peak, a simplified circuit modeling and an E/M simulation are conducted. The results show that occupation ratio of sheath volume between two tips of the cut-off probe and subsequence pressure condition mainly change position of the cut-off peak with respect to plasma frequency. Magnitude of relative voltage taken on the impedance of sheath and the impedance of bulk plasma can explain this effect. Furthermore, effects of gap size, tip radius, and tip length ware revealed based on above analysis.

• 한국가스학회지
• /
• 제9권2호
• /
• pp.22-27
• /
• 2005

본 연구에서는 LNG로부터 냉열을 활용하여 $^{13}CH_4$과 $^{12}CH_4$을 분리하는 초저온 증류 공정에 대한 전산 모사를 분석한 것이다. 사용한 전산 모사 프로그램은 short-cut 방법으로 사용되는 Smoker식과 FUG(Fenske-Underwood-Gilliland) 방법 두가지를 활용하여 실시하였다. 일반적으로 탄소 동위원소 분리에 대한 기술은 많은 방법들이 연구중에 있으며, 특히 초저온 증류 공정에 의한 분리는 많은 장점으로 인해 상업적으로 활용되고 있다.

• 한국기계가공학회지
• /
• 제12권5호
• /
• pp.36-41
• /
• 2013

One of the problems in grinding process using a machining center(MC) with a small diametric wheels is machining error due to decrease of the quill diameter. In this study, side-cut grinding is performed with a vitrified bonded CBN wheel on the machining center. Grinding experiments are performed at various grinding conditions including quill length, quill diameter and depth of cut. The effect on the grinding force, machining error and surface roughness due to the change of the quill rigidity are investigated experimentally. The slenderness ratio of the quill is significant factor to analyse the change of the grinding force and machining error.