• Transactions on Electrical and Electronic Materials
• /
• 제13권2호
• /
• pp.73-77
• /
• 2012

Operation of liquid crystal displays (LCDs) can be improved by monolithic integration of the pixel transistors with light emitting diodes (LEDs) on a single substrate. Conventional LCDs make use of filters to control the backlighting which reduces the overall efficiency. These LCDs also utilize LEDs in series which impose failure and they require high voltage for operation with a power factor correction. The screen of small hand-held devices can operate from moderate brightness. Therefore, III-V nanowires that are grown along with transistors over Silicon substrates can be utilized. Control of nanowire LEDs with nanowire transistors will significantly lower the cost, increase the efficiency, improve the manufacturing yield and simplify the structure of the small displays that are used in portable devices. The steps to grow nanowires on Silicon substrates are described. The vertical n-type and p-type nanowire transistors with surrounding gate structures are characterized. While biased at 0.5 V, nanowire transistors with minimum radius or channel width have an OFF current which is less than 1pA, an ON current more than 1 ${\mu}A$, a total delay less than 10 ps and a transconductance gain of more than 10 ${\mu}A/V$. The low power and fast switching characteristics of the nanowire transistor make them an ideal choice for the realization of future displays of portable devices with long battery lifetime.

• Applied Science and Convergence Technology
• /
• 제24권3호
• /
• pp.53-59
• /
• 2015

The field-effect transistors (FETs) with a graphene-based p-n junction channel were fabricated using the patterned self-assembled monolayers (SAMs). The self-assembled 3-aminopropyltriethoxysilane (APTES) monolayer deposited on $SiO_2$/Si substrate was patterned by hydrogen plasma using selective coating poly-methylmethacrylate (PMMA) as mask. The APTES-SAMS on the $SiO_2$ surface were patterned using selective coating of PMMA. The APTES-SAMs of the region uncovered with PMMA was removed by hydrogen plasma. The graphene synthesized by thermal chemical vapor deposition was transferred onto the patterned APTES-SAM/$SiO_2$ substrate. Both p-type and n-type graphene on the patterned SAM/$SiO_2$ substrate were fabricated. The graphene-based p-n junction was studied using Raman spectroscopy and X-ray photoelectron spectroscopy. To implement low voltage operation device, via ionic liquid ($BmimPF_6$) gate dielectric material, graphene-based p-n junction field effect transistors was fabricated, showing two significant separated Dirac points as a signature for formation of a p-n junction in the graphene channel.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권9호
• /
• pp.2073-2085
• /
• 2012

Recently, the International Telecommunication Union allocated the 470-862 MHz band to the digital broadcasting (DB) service. Moreover, the 790-862 MHz sub-band will be allocated to the next-generation mobile system, known as the International Mobile Telecommunication - Advanced (IMT-A), and to the DB on a co-primary basis in the year 2015. Currently, two candidate technologies are available to represent the IMT-A system; the Mobile WiMAX and Long Term Evolution - Advanced (LTE-A). One of the main criteria of the IMT-A candidate is to not cause additional interference to the primary service (i.e., DB). In this paper, we address the spectrum sharing issue between the IMT-A candidates and the DB service. More precisely, we investigate the interference effect between the DB service and the mobile network, which could be either LTE-A or WiMAX. Our study proposes a spectrum sharing model to take into account the impact of interference and evaluates the spectrum sharing requirements such as frequency separation and separation distance. This model considers three spectrum sharing scenarios: co-channel, zero guard band, and adjacent channel. A statistical analysis is performed, by considering the interferer spectrum emission mask and victim receiver blocking techniques. The interference-to-noise ratio is used as an essential spectrum sharing criterion between the systems. The model considers the random distribution of the users, antenna heights, and the bandwidth effect as well as the deployment environment in order to achieve spectrum sharing. The results show that LTE-A is preferable to WiMAX in terms of having less interference impact on DB; this can eventually allow the operation of both services without performance degradation and thus will lead to efficient utilization of the radio spectrum.

• 제어로봇시스템학회논문지
• /
• 제19권7호
• /
• pp.653-660
• /
• 2013

This paper deals with the problem of unfairness among uplink TCP (Transmission Control Protocol) flows associated with frame aggregation employed in IEEE 802.11n WLANs (Wireless Local Area Networks). When multiple stations have uplink TCP flows and transmit TCP data packets to an AP (Access Point), the AP has to compete for channel access with stations for the transmission of TCP ACK (acknowledgement) packets to the stations. Due to this contention-based channel access, TCP ACKs tend to be accumulated in the AP's downlink buffer. We show that the frame aggregation in the MAC (Medium Access Control) layer increases TCP ACK losses in the AP and leads to the serious unfair operation of TCP congestion control. To resolve this problem, we propose the TAC (TCP ACK Compression) mechanism operating at the top of the AP's interface queue. By exploiting the properties of cumulative TCP ACK and frame aggregation, TAC serves only the representative TCP ACK without serving redundant TCP ACKs. Therefore, TAC reduces queue occupancy and prevents ACK losses due to buffer overflow, which significantly contributes to fairness among uplink TCP flows. Also, TAC enhances the channel efficiency by not transmitting unnecessary TCP ACKs. The simulation results show that TAC tightly assures fairness under various network conditions while increasing the aggregate throughput, compared to the existing schemes.

• 한국재료학회지
• /
• 제13권1호
• /
• pp.11-17
• /
• 2003

DC characteristics of recessed gate 4H-SiC MESFET were investigated using the device/circuit simulation tool, PISCES. Results of theoretical calculation were compared with the experimental data for the extraction of modeling parameters which were implemented for the prediction of DC and gate leakage characteristics at high temperatures. The current-voltage analysis using a fixed mobility model revealed that the short channel effect is influenced by the defects in SiC. The incomplete ionization models are found out significant physical models for an accurate prediction of SiC device performance. Gate leakage is shown to increase with the device operation temperatures and to decrease with the Schottky barrier height of gate metal.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2008년도 한국우주과학회보 제17권2호
• /
• pp.32.2-32.2
• /
• 2008

A major solar radio burst can disturb many kinds of radio instruments, including cellular phone, GPS, and radar. Korea Astronomy and Space Science Institute (KASI) is developing Korean Solar Radio Burst Locator (KSRBL) in collaboration with New Jersey Institute of Technology. KSRBL is a single dish radio spectrograph, which records the spectra of microwave (0.5 - 18 GHz) bursts with 1 MHz spectral resolution and 1 s time cadence, and locates their positions on the solar disk within 2 arcmin. Hardware manufacturing is almost completed including 4-channel digitizer/FPGA. The system is currently installed at Owens Valley Radio Observatory (OVRO), and test of the operation is in progress. It will be installed at KASI in 2009. We report current status and test results of KSRBL.

• 한국유통학회지:유통연구
• /
• 제1권2호
• /
• pp.141-172
• /
• 1996

This study is to investigate global logistics strategies of Korean electronics companies. in terms of service parts. According to the survey, Korean electronics companies were pursuing multi-level global logistics network such as global, continental, national, regional and service center echelon for improving the efficiency of service parts global logistics. Especially there was a tendency of developing new continental distribution centers. And the companies were exploiting efficiency through inventory control by multi-level echelon, demand forecasting by the product life cycle and supply and service lead time management. But there were some insufficient factors for the efficiency of global logistics operation at the construction of worldwide real time logistics information system and pursuit of the efficiency on the whole network including subcontractors. For the future competitive advantage of the Korean electronics companies, the following are suggested: 1) the establishment of arranged logistics channel adjusting each company's global strategy, 2) the construction of worldwide real time logistics information system, 3) the reengineering of all logistics procedures such as order processing, shipping, inventory control, etc., 4) the enhancement of the ratio of the supply from the external companies and the internal manufacturing subsidiaries at each continent, 5) and the pursuit of operational internalization of external subcontractors.

• 반도체디스플레이기술학회지
• /
• 제9권1호
• /
• pp.55-59
• /
• 2010

In this study, we developed nonvolatile residue (NVR) real-time monitoring system to measure the nonvolatile residue particle in ultra pure water (UPW). This device has a capability of measuring 4 different channels, i.e., 10 nm, 30 nm, 50 nm, and 100 nm. Until now, the light scattering method to detect RAE(residue after evaporation) was the only choice. However, this method can detect RAE larger than ca. 50 nm. In ultra pure water, RAE particles are usually very small and hard to detect with conventional laser scattering devices. To detect very small RAEs, a new system is developed and tested. The system consists of an atomizer that generates RAE particles and a four channel condensation particle counter (CPC). During the several months' operation in manufacturing line, the system was successfully tested and showed reliable results.

• 전자공학회논문지D
• /
• 제35D권3호
• /
• pp.56-62
• /
• 1998

One of the key components to accomplish WDM all-optical network is an arrayed waveguide grating router. The spectral characterisitc of the ypeical arrayed waveguide grating rouger has parabolic shape, hence the bandwidth is limited. The spectral response of an optical filter should be as flat as possible for the reliable operation of the syste, because the center frequency of the optical source could be deviated in the actual system. In order to acquire these characteristics, we propose and design a new type of the arrayed waveguide grating router with a flat passband using the Fourier optics concept. The BPM simulation results of the new arrayed waveguide grating router with the flat passband show that the bandwideth is 0.8 nm at -1 dB, instertion loss about 6 dB, and the crosstalk less than -23 dB fro each cnannel, which is 1.6 nm(200 GHz) separated from the adjacent channel around 1550 nm wavelength range.

• International Journal of Computer Science & Network Security
• /
• 제23권10호
• /
• pp.1-10
• /
• 2023

This paper proposes a method to extend Inter-Carrier Interference (ICI) canceling Orthogonal Frequency Division Multiplexing (OFDM) receivers for 5G mobile systems to spatial multiplexing 2×2 MIMO (Multiple Input Multiple Output) systems to support high-speed ground transportation services by linear motor cars traveling at 500 km/h. In Japan, linear-motor high-speed ground transportation service is scheduled to begin in 2027. To expand the coverage area of base stations, 5G mobile systems in high-speed moving trains will have multiple base station antennas transmitting the same downlink (DL) signal, forming an expanded cell size along the train rails. 5G terminals in a fast-moving train can cause the forward and backward antenna signals to be Doppler-shifted in opposite directions, so the receiver in the train may have trouble estimating the exact channel transfer function (CTF) for demodulation. A receiver in such high-speed train sees the transmission channel which is composed of multiple Doppler-shifted propagation paths. Then, a loss of sub-carrier orthogonality due to Doppler-spread channels causes ICI. The ICI Canceller is realized by the following three steps. First, using the Demodulation Reference Symbol (DMRS) pilot signals, it analyzes three parameters such as attenuation, relative delay, and Doppler-shift of each multi-path component. Secondly, based on the sets of three parameters, Channel Transfer Function (CTF) of sender sub-carrier number n to receiver sub-carrier number l is generated. In case of n≠l, the CTF corresponds to ICI factor. Thirdly, since ICI factor is obtained, by applying ICI reverse operation by Multi-Tap Equalizer, ICI canceling can be realized. ICI canceling performance has been simulated assuming severe channel condition such as 500 km/h, 8 path reverse Doppler Shift for QPSK, 16QAM, 64QAM and 256QAM modulations. In particular, 2×2MIMO QPSK and 16QAM modulation schemes, BER (Bit Error Rate) improvement was observed when the number of taps in the multi-tap equalizer was set to 31 or more taps, at a moving speed of 500 km/h and in an 8-pass reverse doppler shift environment.