• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1012-1012
• /
• 2001

The elegant early experiments of Herschel demonstrated that there is light after the visible spectrum in a region we call the near infrared (NIR). This was followed by the work which showed that the spectrum went further into what we call the mid infrared (MIR). The MIR has been used for many years as a qualitative and quantitative region to measure constituent values. The MIR region contains the fundamental vibrations which can be theoretically calculated from symmetry rules and harmonic oscillator equations. The NIR is not as straight forward because the region from 400-2500 nm does not contain any of the fundamental vibrations only combination bands and overtones. Over the past fifty years efforts to understand the NIR have largely been ignored while the quantitative aspects of the region have been utilized. This presentation will focus on the efforts to define terms for NIR, examine the calculation of combination bands and overtones and ways to interpret the spectra. The interpretation of the NIR has been aided greatly in recent years by the use of two dimensional spectroscopy which allows the correlation of bands in one spectral region with that of the NIR.

• Asia pacific journal of information systems
• /
• v.29 no.4
• /
• pp.731-751
• /
• 2019

This study examined the impact of various product photo features on the attention of potential consumers in online apparel retailers' environment. Recently, the method of apparel's product photo representation in online shopping stores has been changed a lot from the classic product photos in the early days. In order to investigate if this shift is effective in attracting consumers' attention, we examined the related theory and verified its effect through laboratory experiments. In particular, experiment data was collected and analyzed using eye tracking technology. According to the results of this study, it was shown that the product photos with asymmetry are more attractive than symmetrical photos, well emphasized object within a photo more attractive than partially emphasized, smiling faces are more attractive for customer than emotionless and sad, and photos with uncentered models focus more consumer's attention than photos with model in the center. These results are expected to help design internet shopping stores to gaze more customers' attention.

• Journal of the Korean housing association
• /
• v.12 no.4
• /
• pp.195-203
• /
• 2001

The purpose of this study is to analyze the characteristics of Mario Botta's residential design. The characteristics of Mario Botta's residential design are following as : 1. The residential design of Mario Botta planed from 1960' to 1970's is based on the style composition method of modern design, specially by the influence of Le Corbusier and Louis I. Kahn. Botta's residential design of the 1980's is generally affected by A. Palladio, and is characterized as the representation of classic standard. The residential design of the 1980's shows the establishment level of Mario Botta's residential design, and produces particular Botta's facade. 2. The characteristics of Mario Botta's spatial composition on residential design could be implicated by the spatial distribution of each floor which is divided by three floors, simple and primitive volume which has a symmetry, opening through the massive elimination n the center of front, double skin, the contrast between void and solid, and the inflow of light through the top-light. 3. Most Botta's residential designs have Loggia in the center of facade working as a buffer space which joins outside and inside space together. They also lead the spatial continuous flow. The inside space is combined by the light coming through top-light and vertical opening. 4. They have high accomplishment in complicating details. They show the outside design of a horizontal belt according to the module of concrete block and the decorated design using compositional materials such as an unevenness piled up askew concrete block .

• Journal of the Korean Society of Costume
• /
• v.37
• /
• pp.149-162
• /
• 1998

This study is thed Embroidery, Cross-stitchery, Weaving, Wax-Printing of technique and design appeared in textile of Miaos dwells in south-west among the minority people of china. The study is as follows. First, the technique of textile1) satin stitch, couching stitch, french-knot stitch, etc. using anther silk thread or cotton thread color 2) cross-stitchery 3) hand-weaving technique which is shaped other warp or weft using simple loom 4) the technique of dyeing of pattern using effect with wax. These methods are singly used mixing together, therefore doubled beauty. Second, these technuque of ornament have other independence, specially ornament apron, sling, sleeve borders, slack borderss, edge of upper garment, take off and put on easily, heighten effect of various ornament, can preserve many years. Third, Maker, female born in this country fashion by need of herself, used liberal method shown in unique creativity of life. This texture make standards capable female proud of intelligent and skill of herself. Fourth, Design appeared in textile like as pattern flying bird in the sky, strolling beast in the field, lion rolling gem, laughing dragon winding snake at gem, birks, flowers, fish, butterfly is used as the wish of long life, a lucky sign. They expressed creativity and unique conception using formation : the technique transform other shape using by omitting or adding or overestimating. Geometric pattern of tartan, revealing, Fifth, composition structure having balance and symmetry or contradiction towards center and circumstance of the center harmonized repeatedly method, expressed unique artful attraction by full composition.

• Archives of Plastic Surgery
• /
• v.36 no.1
• /
• pp.29-32
• /
• 2009

Purpose: Introduction of the mammary implant through the abdominal route has been well known since late 1960s, but the use of transabdominal route for contralateral breast augmentation in transverse rectus abdominis musculocutaneous (TRAM) flap breast reconstruction patients has not been reported in Korean literature. The authors report their experience with technical points as well as the selection of the appropriate patients. Methods: Simultaneous contralateral augmentation mammaplasty through transabdominal route was performed in 11 patients who underwent TRAM breast reconstruction from August 2003 to May 2008 with a mean follow up of 27 months. The pocket was created under direct vision: 3 subglandular, 7 subpectoral, and 1 dual plane was dissected. Eight saline and 3 silicone gel implants were used with an average volume of 165 cc. Results: There were no complications such as infection, hematoma, implant displacement, and capsular contracture. The result was well maintained throughout the follow up period. Conclusion: Transabdominal route could be recommended in selected patients for contralateral augmentation in TRAM breast reconstruction.

• Journal of Biosystems Engineering
• /
• v.27 no.6
• /
• pp.557-564
• /
• 2002

Corrugated board is an efficient low-cost structure material fur the boxes that are widely used for transporting, storing and distributing goods. Corrugated board is also considered as an orthotropic because the principal material directions are the same as in paperboard. The purpose of this study was to elucidate the principal design parameters of ventilating box through the FEA on the various types of ventilating hole. From the viewpoint of the stress distribution and stress level, the optimum pattern and location of the ventilating hole were vertically oblong, and symmetry position with a short distance to the right and left from the center of front and rear panel. And, the optimum location and pattern of hand hole were a short distance to the top from the center of both side panels, and modified shape to increase the radius of curvature of both side in horizontal oblong. In general, the optimum pattern and location of both the ventilating hole and hand hole based on the FEM analysis were well verified by experimental investigation. It is suggested that decrease in compressive strength of the box could be minimized in the same ventilating hole area under the condition of the length of major axis of ventilating hole is less than 1/4 of box length, the ratio of minor axis/major axis is 113.5∼l/2.5, and number of the ventilating holes is even and symmetrical.

• Journal of Ceramic Processing Research
• /
• v.13 no.spc1
• /
• pp.75-77
• /
• 2012

The AlGaN-based vertical light-emitting diodes (LEDs) on thick GaN epilayer were fabricated by a hydride vapor phase epitaxy with multi sliding boat system. The optical and electrical characteristics of AlGaN-based vertical LEDs were evaluated using a scanning electron microscopy, electroluminescence and I-V measurements. The AlGaN-based vertical LEDs structure has hexagonal symmetry, 500 ㎛ in diameter and above 67 ㎛ in growth thickness. At the room-temperature, the broaded strong peak and relatively high intensity peak were gradually measured at 405 nm with increasing injection current. And a forward operator voltage was measured to be about 7.5 V.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.143-148
• /
• 2012

The photodissociation dynamics of cyclopropyl bromide ($C_3H_5Br$) and cyclobutyl bromide ($C_4H_7Br$) at 234 nm was investigated. A two-dimensional photofragment ion-imaging technique coupled with a [2+1] resonanceenhanced multiphoton ionization scheme was utilized to obtain speed and angular distributions of the nascent $Br(^2P_{3/2})$ and $Br^*(^2P_{1/2})$ atoms. The recoil anisotropies for the Br and $Br^*$ channels were measured to be ${\beta}_{Br}=0.92{\pm}0.03$ and ${\beta}_{Br^*}=1.52{\pm}0.04$ for $C_3H_5Br$ and ${\beta}_{Br}=1.10{\pm}0.03$ and ${\beta}_{Br^*}=1.49{\pm}0.05$ for $C_4H_7Br$. The relative quantum yield for Br was found to be ${\Phi}_{Br}=0.13{\pm}0.03$ and for $C_3H_5Br$ and $C_4H_7Br$, respectively. The soft radical limit of the impulsive model adequately modeled the related energy partitioning. The nonadiabatic transition probability from the 3A' and 4A' potential energy surfaces was estimated and discussed.

• Journal of Electrochemical Science and Technology
• /
• v.2 no.1
• /
• pp.1-7
• /
• 2011

Nanocomposites of reduced graphene oxide and manganese (II,III) oxide can be synthesized by the freeze-drying process of the mixed colloidal suspension of graphene oxide and manganese oxide, and the subsequent heat-treatment. The calcined reduced graphene oxide-manganese (II,III) oxide nanocomposites are X-ray amorphous, suggesting the formation of homogeneous and disordered mixture without any phase separation. The reduction of graphene oxide to reduced graphene oxide upon the heat-treatment is evidenced by Fourier-transformed infrared spectroscopy. Field emission-scanning electronic microscopy and energy dispersive spectrometry clearly demonstrate the formation of porous structure by the house-of-cards type stacking of reduced graphene oxide nanosheets and the homogeneous distribution of manganese ions in the nanocomposites. According to Mn K-edge X-ray absorption spectroscopy, manganese ions in the calcined nanocomposites are stabilized in octahedral symmetry with mixed Mn oxidation state of Mn(II)/Mn(III). The present reduced graphene oxide-manganese oxide nanocomposites show characteristic pseudocapacitance behavior superior to the pristine manganese oxide, suggesting their applicability as electrode material for supercapacitors.

• The Journal of Advanced Prosthodontics
• /
• v.14 no.1
• /
• pp.1-11
• /
• 2022

PURPOSE. The maximum width between the mesial and distal labial transitional line angles, described as "esthetic width" herein, could significantly influence the visual perception of the teeth and smile. This study aimed to conduct biometric research on esthetic width and to explore whether regular distribution exists in the esthetic width of human teeth. MATERIALS AND METHODS. A total of 4,264 maxillary and mandibular anterior teeth were measured using the Geomagic studio software program. The proportions of maxillary to mandibular homonymous teeth and proportions between the adjacent teeth were calculated. Bilateral symmetry and the correlation between the esthetic and mesiodistal widths were both accounted for during the measurement procedures. RESULTS. The mean esthetic widths were 6.773 ± 0.518 mm and 4.329 ± 0.331 mm for maxillary and mandibular central incisors, respectively, 5.451 ± 0.487 mm and 5.008 ± 0.351 mm for maxillary and mandibular lateral incisors, respectively, and 3.340 ± 0.353 mm and 5.958 ± 0.415 mm for maxillary and mandibular canines, respectively. Except for the mandibular canines, no significant difference in esthetic width was found among homonymous teeth from the same jaw. A high linear correlation was found between the esthetic and mesiodistal widths of the same tooth, except for the maxillary canines. Esthetic width proportions among different tooth categories showed some regular patterns, which were similar to those of the mesiodistal width. CONCLUSION. Esthetic width is regularly distributed among the teeth in the Chinese population. This could provide an important reference for anterior dental restorations and dimension recovery in esthetic reconstruction of anterior teeth.