• 센서학회지
• /
• 제14권4호
• /
• pp.231-236
• /
• 2005

Calibration capability was evaluated using the reference-grade platinum resistance thermometer (PRT) in the temperature range of $-50^{\circ}C$ to $250^{\circ}C$ for the national calibration centers. The reference-grade PRT was calibrated at the several fixed points, which was composed by the freezing points of Sn, In, the melting point of Ga and the triple point of water and Hg, before and after the round-robin test (RRT) experiments. The temperature scale of reference-grade PRT was compared to the local standard PRT's using the system of the national calibration centers. $E_{n}$ values was calculated by the temperature difference between the reference-grade PRT and the local standard PRT, and the best measurement capability. Finally, the capability of the national calibration centers was evaluated by the $E_{n}$ values.

• Journal of Astronomy and Space Sciences
• /
• 제29권2호
• /
• pp.199-208
• /
• 2012

The world's first geostationary ocean color imager (GOCI) is a three-mirror anastigmat optical system 140 mm in diameter. Designed for 500 m ground sampling distance, this paper deals with on-orbit modulation transfer function (MTF)measurement and analysis for GOCI. First, the knife-edge and point source methods were applied to the 8th band (865 nm) image measured April 5th, 2011. The target details used are the coastlines of the Korean peninsula and of Japan, and an island 400 meters in diameter. The resulting MTFs are 0.35 and 0.34 for the Korean East Coastline and Japanese West Coastline edge targets, respectively, and 0.38 for the island target. The daily and seasonal MTF variations at the Nyquist frequency were also checked, and the result is $0.32{\pm}0.04$ on average. From these results, we confirm that the GOCI on-orbit MTF performance satisfies the design requirements of 0.32 for 865 nm wavelength.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.335-336
• /
• 2014

This paper investigates the design of coupled inductor for minimum inductor current ripple in rapid traction battery charger systems. Based on the general circuit model of coupled inductor together with the operating principles of dc-dc converter, the relationship between the ripple size of inductor current and the coupling factor is derived under the different duty ratio. The optimal coupling factor which corresponds to a minimum inductor ripple current becomes -1, i.e. a complete inverse coupling without leakage inductance, as the steady-state duty ratio operating point approaches 0.5. In an opposite manner, the optimal coupling factor value of zero, i.e. zero mutual inductance, is required when the steady-state duty ratio operating point approaches either zero or one. Coupled inductors having optimal coupling factor can minimize the ripple current of inductor and battery current resulting in a reliable and efficient operation of battery chargers.

• 식품과학과 산업
• /
• 제50권3호
• /
• pp.39-50
• /
• 2017

In order to secure competitiveness of the home meal replacement (HMR) industry from a long-term perspective, development of packaging and processing technologies must be achieved. The development of technology that can secure freshness, nutrition, and taste but secures the shelf life is the key to the future growth of HMR. The future of HMR can be considered in terms of nutrition, environment and safety. From the nutritional point of view, it is expected that development of healthy HMR such as low-salt, low-sugar, low-fat, and high fiber and premium HMR with functional ingredient enhanced, and personalized HMR for silver, infant and patients will be done. And it is expected that development of HMR utilizing environmentally friendly food or local food, development of energy reduction and environmentally friendly disinfection technology, development of environmentally friendly packaging material, and providing information on HMR preparation using QR code and RFID from the environmental and safe point of view.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2021년도 제64차 하계학술대회논문집 29권2호
• /
• pp.695-696
• /
• 2021

최근 다양한 연령층과 직업군들 사이에서 기능성 신발에 대한 관심이 증대되고 있다. 그러나 기능성 신발 및 맞춤형 신발은 높은 가격대와 긴 제작 시간이 필요하다. 이러한 문제점은 3D 스캐너 도입으로 해결이 가능하나, 정확한 발 형상 측정이 가능한 3D 스캐너는 고가의 장비이기 때문에 매장별 보급이 어렵다. 본 논문은 기능성 신발의 보급을 위하여 저가형 3D 스캐너에서 정확한 발 고유 변인을 측정할 수 있는 시스템에 대해 서술한다. 이를 위해 이를 위해 저가형 Depth Camera를 이용한 저가형 3D 스캐너의 발 형상 3D 점군 데이터를 2차원으로 변형하고, 발 형태를 감싸는 최소 사각형(Min Area Rect)를 형성하여 발 안쪽점 및 발 가쪽점을 추정한다. 생성된 최소 사각형과 발 안쪽점 및 발 가쪽점 등은 발 고유 변인 측정의 기준이 된다. 실험 결과에서는 측정 기준을 이용하여 발 고유 변인인 발 길이, 발 너비, 발꿈치 너비, 발꿈치에서 발안쪽점 및 발 가쪽점 길이 등 5가지 고유 변인을 측정하는 것을 보여준다.

• 한국물환경학회지
• /
• 제29권4호
• /
• pp.523-530
• /
• 2013

This study has been carried out to clarify the characteristics of discharge and pollutant loading according to flow conditions at jiseok stream watershed (JSW). A flow rate and pollutant load in the study watershed were estimated by equation of stage-discharge and discharge-loads rating curve. By using the methods above, I've evaluated the water quality (WQ) of the JSW if it is satisfied with the standard target. I've collected the data of BOD and T-P from the JSW every 8 days for the duration of 12 months. And then, I've schematized the data upon the load duration curve and the results showed me that the WQ of JSW was satisfied with the standard target. I've also collected the same data every each day for the duration of 12 months from JSW and have schematized the data again. And the results showed that it also was satisfied with the standard target. To be concluded, I've determined that point pollution sources of JSW gives more significant impacts to the WQ than non-point pollution sources of JSW and hence, as time goes, point pollution sources will keep depriciating the WQ of JSW. Therefore, further efforts will be required to JSW to maintain the WQ.

• Journal of Computational Design and Engineering
• /
• 제2권4호
• /
• pp.218-232
• /
• 2015

Piecewise linear (G01-based) tool paths generated by CAM systems lack $G_1$ and $G_2$ continuity. The discontinuity causes vibration and unnecessary hesitation during machining. To ensure efficient high-speed machining, a method to improve the continuity of the tool paths is required, such as B-spline fitting that approximates G01 paths with B-spline curves. Conventional B-spline fitting approaches cannot be directly used for tool path B-spline fitting, because they have shortages such as numerical instability, lack of chord error constraint, and lack of assurance of a usable result. Progressive and Iterative Approximation for Least Squares (LSPIA) is an efficient method for data fitting that solves the numerical instability problem. However, it does not consider chord errors and needs more work to ensure ironclad results for commercial applications. In this paper, we use LSPIA method incorporating Energy term (ELSPIA) to avoid the numerical instability, and lower chord errors by using stretching energy term. We implement several algorithm improvements, including (1) an improved technique for initial control point determination over Dominant Point Method, (2) an algorithm that updates foot point parameters as needed, (3) analysis of the degrees of freedom of control points to insert new control points only when needed, (4) chord error refinement using a similar ELSPIA method with the above enhancements. The proposed approach can generate a shape-preserving B-spline curve. Experiments with data analysis and machining tests are presented for verification of quality and efficiency. Comparisons with other known solutions are included to evaluate the worthiness of the proposed solution.

• 한국운동역학회지
• /
• 제14권1호
• /
• pp.27-40
• /
• 2004

The purpose of this study was to provide basic data for improving athletic performances by analyzing the kinematic variables of the Double Backward Somersault on the Parallel Bars through the 3D motion analysis. The subjects in this study were 5 male gymnasts who were ranked as national athletes. The results are as follows. 1. A total time(Mean Time) of performance showed $2.72{\pm}0.82\;sec$. and flight time to landing after releasing was 0.87sec.(mean). In order to perform better stable flying movement, the flight time should be increased. 2. In the change of velocity of the center of mass, when the increasing ascension velocity of the upper point was high, the position in the top point was high on releasing. 3. In the position variable of the center of mass, the mean of upper-bottom position in horizontal posture was $242.1{\pm}6.5cm$, $232.8{\pm}6.4cm$ in releasing, and $265.0{\pm}5.6cm$ in the highest point. This result is explained that the position of center of mass can be raised by using elastic power when wrist raised the bar in the releasing movement. 4. The angle of shoulder joint was $271.1{\pm}14.0$. Such a big angle influences a negative effect on the releasing velocity, because trunk is not a position in the enough vertical direction. 5. The ankle of hip joint in hand-standing was $191.1{\pm}5.9$, $118.8{\pm}5.3$ in releasing, and $122.3{\pm}5.3$ in taking on. Therefore, the result suggests that trunk should be straightly raised in taking on.

• 한국음향학회지
• /
• 제34권4호
• /
• pp.328-334
• /
• 2015

본 논문은 다양한 타격 강도와 위치에 따른 징의 음향 차이를 소프닝과 맥놀이 분석을 통해 살펴본다. 타격 강도는 아주 강하게, 강하게, 약하게로 구분하였고 타격 위치는 가운데, 위, 오른쪽으로 구분하였으며 분석에는 스펙트로그램을 사용하였다. 소프닝은 징의 가운데를 강하게 타격할수록 명확하게 관측되었고 주파수 이동 폭은 타격 강도와 주파수에 비례하였다. 이러한 현상은 배음에서 두드러졌으며 다른 부분음에서는 불규칙적으로 발생하였다. 맥놀이는 초기 맥놀이와 후기 맥놀이로 분류할 수 있었으며 가운데를 타격할 때보다 측면을 타격할 때 더 넓은 주파수 대역에서 더 많은 맥놀이가 발생한다는 것을 알 수 있었다. 또한 가운데를 타격한 경우 초기 맥놀이에 영향을 주는 배음 주변의 성분들이 있음을 밝혔다.

• 분석과학
• /
• 제28권4호
• /
• pp.270-277
• /
• 2015

비등점은 유기물의 물리화학적 성질을 특정하는데 있어 매우 근본적 요소 중 하나이다. 그러나 기존의 정량적 구조-물성 상관관계식들은 고에너지 물질 등과 같은 특정 물질 군에 대한 실험값들의 부족 등으로 인해 제한적인 응용성을 가지고 있었다. 본 연구에서는 서로 다른 출처로부터의 5,923개의 비등점 자료를 확보하였으며, 이에는 일반적 유기화합물과 더불어 특수목적을 가지는 분자들을 포함하였고, 이들 수집된 데이터 셋을 이용하여 새로운 비등점 예측모델을 개발하는데 사용하였다. 다양한 학습 방법을 이용하여 새로이 수집된 데이터 셋을 이용한 2차원 분자 표현자에 기반한 비등점 모델을 도출하였다. 개발된 예측모델의 적정성과 견고성을 확인하였고, 훈련 셋의 표현자에 기반한 비등점 예측모델의 적용구역을 도출하였다.