• 한국시뮬레이션학회논문지
• /
• 제12권4호
• /
• pp.83-94
• /
• 2003

Managing a call center is a complex and diverse challenge. Call center becomes a very important contact point and a data ware house for successful CRM. Improving performance of call center is critical and valuable for providing better service. In this study we applied forecasting technique to estimate incoming calls and ProModel based simulation model to enhance performance of a mobile telecommunication company's call center. The simulation study shows reduction in managing cost and better customer's satisfaction.

• 대한화장품학회지
• /
• 제48권1호
• /
• pp.55-64
• /
• 2022

Cleansing foam이라 불리는 지방산 칼륨 cream soap은 crystal gel 구조로 이루어져 있어 유화계와는 달리 전단응력에 약하며 고온의 보관조건에서 쉽게 분리되는 특성을 보여준다. Crystal gel 구조는 지방산의 종류 및 비율, 중화도, polyol의 종류와 사용량에 따라 크게 영향을 받는다. Crystal gel 구조에 미치는 이들의 영향을 조사하기 위해 water/potassium hydroxide (KOH)/fatty acid ternary system에서 실험을 실시하였다. Differential scanning calorimeter (DSC) 측정 결과 myristic acid (MA) : stearic acid (SA) = 3 : 1 비율에서 공융점(eutectic point)를 갖고 이 혼합비가 가장 안전한 삼성분계(ternary system)를 만든다는 것을 발견했다. 점도 측정과 편광현미경 (POM) 관찰 결과 중화도는 75% 부근이 최적이라고 판단된다. 삼성분계의 melting point (T_m)이 보관온도보다 높을 때, 그리고 crystal phase가 lamellar gel phase로 상 전이가 일어날 때 안정하나 지방산 함량의 증가는 안정성에 거의 영향을 미치지 않는다. 삼성분계에 polyol의 첨가는 T_m을 변화시키고 상전이를 일으키는데 중요한 역할을 한다. 클렌징폼의 구조는 저온 주사전자현미경 (Cryo-SEM), 소각 및 광각 X-선 산란 (SAXS, WAXS) 분석으로 규명하였다. Butylene glycol (BG), propylene glycol (PG), dipropylene glycol (DPG)은 T_m을 낮추어주며 lamellar gel phase 형성을 어렵게 하는 반면 glycerin, PEG-400, sorbitol은 T_m을 상승시키고 lamellar gel phase 형성을 용이하게 하며 안정한 삼성분계를 만든다.

• 대한원격탐사학회지
• /
• 제36권6_1호
• /
• pp.1349-1365
• /
• 2020

최근 스마트 시티, 디지털 트윈 등에 실제 3차원 좌표를 취득할 수 있는 이점에 따라 포인트 클라우드를 이용한 모델 생성에 관한 연구가 늘어나고 있으며, 건물 형상 및 텍스처의 수정이 용이한 솔리드 모델에 대한 요구가 늘어나고 있다. 이에 따라 본 논문에서는 포인트 클라우드 데이터를 기반으로 군집형 솔리드 건물 모델을 생성하는 방법을 제안한다. 제안하는 방법은 총 다섯단계로 구성된다. 첫 단계에서는 포인트 클라우드의 평면성 분석을 통해 지면을 제거하였다. 두 번째 단계에서는 지면이 제거된 포인트 클라우드에서 건물 영역을 추출하였다. 세 번째 단계에서는 건물의 세부 구조물 영역을 추출하였다. 네 번째 단계에서는 추출된 영역에 3차원 좌표정보가 부여된 3차원 건물 모델의 형상을 생성하였다. 마지막 단계에서는 건물 모델 형상에 텍스처를 부여하여 3차원 건물 솔리드 모델을 생성하였다. 제안하는 방법의 검증을 위하여 상용 소프트웨어를 이용해 무인항공기 영상으로부터 포인트 클라우드를 추출하여 실험하였다. 그 결과, 포인트 클라우드 내에 존재하는 일정 높이 이상의 모든 건물에 대하여 포인트 클라우드 대비 위치오차 1 m 내외의 3차원 건물 형상을 생성하고, 원본 영상 해상도 대비 2배 이내의 해상도를 갖는 텍스처링이 수행된 3차원 모델이 생성되는 것을 확인하였다.

• 환경위생공학
• /
• 제23권4호
• /
• pp.65-71
• /
• 2008

To drive efficiently total water pollution load management, needs to calculate the exact load emissions, pollution load allocation and implementation evaluation in each unit area of watershed and accurate and regular flow of data. For these reasons, the Nakdong River TMDL Research Center has produced directly or indirectly in the average interval of eight days (30 times or more / year) 41 points for unit area of the total water pollution load management and 8-point of municipal requirement for a total of 49 branches as a flow data in 2004 from August. This acquired the survey flow is evidence of trends and changes each point in the Nakdong River based on time, such as 10 years based on average design flow available to the foundation of the summit as the major water policy is to be utilized. This study was performed on actual discharge measuring data and introduced performance results each drainage basin of Nakdong River from 2004 to 2008 over the total of past five years.

• Journal of Magnetics
• /
• 제16권2호
• /
• pp.169-172
• /
• 2011

This study reports an alternative method for measuring the magnetoresistance of unpatterned magnetic tunnel junctions similar to the current-in-plane tunneling (CIPT) method. Instead of using microprobes, a series of point contacts with different spacings are coated on the top surface of the junctions and R-H loops at various spacings are then measured by the usual four-point probe method. The values of magnetoresistance and resistance-area products can be obtained by fitting the measured data to the CIPT theoretical model. The test results of two types of junctions were highly similar to those obtained from standard CIPT tools. The proposed method may help to accelerate the process for evaluating the quality of magnetic tunnel junctions when commercial CIPT tools are not accessible.

• Nuclear Engineering and Technology
• /
• 제51권2호
• /
• pp.546-555
• /
• 2019

Since the first nuclear reactor first critical, nuclear systems has gone through four generations of history, and the fourth generation nuclear system will be truly realized in the near future. The notions of SVBR and lead-bismuth eutectic alloy coolant put forward by Russia were well received by the international nuclear science community. Lead-bismuth eutectic alloy with the ability of the better neutron economy, the low melting point, the high boiling point, the chemical inertness to water and air and other features, which was considered the most promising coolant for the 4th generation nuclear reactors. This study mainly focuses on the structural design optimization of the 4th-generation reactor coolant pump, including analysis of external characteristics, inner flow, and transient characteristic. It was found that: the reactor coolant pump with a central symmetrical dual-outlet volute structure has better radial-direction balance, the pump without guide vane has better hydraulic performance, and the pump with guide vanes has worse torsional vibration and pressure pulsation. This study serves as experience accumulation and technical support for the development of the 4th generation nuclear energy system.

• 제어로봇시스템학회논문지
• /
• 제22권2호
• /
• pp.133-138
• /
• 2016

This paper describes the track initiation and target-tracking filter for ship tracking in a marine environment by using Light Detection And Ranging (LiDAR). LiDAR with three-dimensional scanning capability is more useful for target tracking in the short to medium range compared to RADAR. LiDAR has rotating multi-beams that return point clouds reflected from targets. Through preprocessing the cluster of the point cloud, the center point can be obtained from the cloud. Target tracking is carried out by using the center points of targets. The track of the target is initiated by investigating the normalized distance between the center points and connecting the points. The regular track obtained from the track initiation can be maintained by the target-tracking filter, which is commonly used in radar target tracking. The target-tracking filter is constructed to track a maneuvering target in a cluttered environment. The target-tracking algorithm including track initiation is experimentally evaluated in a sea-trial test with several boats.

• 대한물리치료과학회지
• /
• 제8권2호
• /
• pp.1059-1064
• /
• 2001

This study is aimed at diagnosing transmutation aspect with the respective of hemiplegia patient's static adaptation of posture which is influenced by anti-gravity excercise, center of gravity shifting movement and segmental movement adaption of the legs and arms by key-point control in the process of Bobatli's treatment approach. The patients for the investigation of this study were selected as a total 17 patients who were doing the physical-therapy in Tae-gu Rehabilitation Center, and diagnosed as hemiplegia patients by Rehabilitation Medicine department in Kyung-buk University hospital. And also, there investigated into temporal transition that keep the attitude with one-leg standing on the ground concerning static attitude adaption on the basis of the before of anti-gravity movement and the after of 4-weeks movement. The findings of this study were as follows: With the respective the time to keep standing pose by one-leg at static attitude transmutation, affected side showed meaningful differences as a l.86/sec, 2.62/sec at 4 weeks later considering the before and after of this experiment.(p<0.01), non-affected side at the aspect of attitude keeping time, but there didn't showed meaningful differences statistically.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.96-98
• /
• 2005

In this paper, an algorithm to compensate the distorted signals due to Current Transformer(CT) saturation is suggested, First, DWT which can be easily realized by filter banks in real-time applications is used to detect a start point and an end point of the saturation. Secondly, For enough Datas those need to use the least-square curve fitting method, the distorted current signal is compensated by the AR(autoregressive) model using the data during the previous healthy section until pick point of Saturation. Thirdly, the least-square curve fitting method is used to restore the distorted section of the secondary current. Finaly, this algorithm had a Hadware test using DSP board(TMS320C32) with Doble test device. DWT has superior detection accuracy and the proposed compensation algorithm which shows very stable features under various levels of remanent flux in the CT core is also satisfactory. And this algorithm is more correct than a previous algorithm which is only using the LSQ fitting method. Also it can be used as a MU involving the compensation function that acquires the second data from CT and PT.

• 제어로봇시스템학회논문지
• /
• 제20권9호
• /
• pp.950-956
• /
• 2014

In this paper, the real-time detection method of a DDP (Driving Direction Point) is proposed for an unmanned vehicle to safely follow the center of the road. Since the DDP is defined as a center point between two lanes, the lane is first detected using a web camera. For robust detection of the lane, the binary thresholding and the labeling methods are applied to the color camera image as image preprocessing. From the preprocessed image, the lane is detected, taking the intrinsic characteristics of the lane such as width into consideration. If both lanes are detected, the DDP can be directly obtained from the preprocessed image. However, if one lane is detected, the DDP is obtained from the inverse perspective image to guarantee reliability. To verify the proposed method, several experiments to detect the DDPs are carried out using a 4 wheeled vehicle ERP-42 with a web camera.