• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.1
• /
• pp.103-110
• /
• 2010

Recently, reducing usage of cement and using by-product of industry such as blast furnace slag and fly-ash have been increased to reduce $CO_2$ gas emission. That apply to construction. As a result, reduction of environmental stress and recycling of resources are expected. In this study, as basic study to the reuse of resources and reduce Environmental Load, comparing and analyzing hardening characteristics and durability as using the blast furnace slag and fly-ash, examining concrete characteristics substituted the three elements for the blast furnace slag and fly-ash and evaluating the relationship as binder. Through this, it want to provide the basic data for mass utilization. Blast furnace slag powder and replaced at fly-ash compressive strength of concrete in the strength of the initial seven days material age lower level of expression significantly compared to the concrete, but, 28 days after the similar or higher compressive strength than the concrete expression of the was. In addition, the reserves replacement of blast furnace slag powder salt injury increasing resistance are seen improvements, according to the conventional blast furnace slag powder study by the chloride ions on the surface of the concrete are improved being fixation salt injury resistance is considered.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.269-275
• /
• 2019

As the national industry is developing gradually due to the expansion of the economic scale, the construction of large and super high-rise structures for building social infrastructure has been increasing, and studies have been conducted actively to transmit the large loads at the upper portion to the lower bedrock. In this study, the PHC was extended to an ultra-high strength PHC, which increased the concrete compressive strength of the PHC from the conventional 80 MPa to 110 MPa, and the PHC, which extended the tip of the pile. After construction with the driving method and injected pile method, the tendency of the bearing capacity was tested through a load test. Measurements of the bearing capacity of the extended PHC using the pile driving method revealed the main surface friction force to be smaller than that of the general PHC, and the stet-up effect was also insignificant. On the other hand, the effect of the friction force on the ground surface when the injected pile method was applied is expected to increase the bearing capacity when the gap between the main surface and the ground is wide and the cement paste is filled tightly. In addition, the ultrahigh strength PHC showed higher bearing capacity than the conventional PHC, and the permissible pile stress was less than 60%. Therefore, it is possible to reduce the number of piles and reduce the construction cost and effect of shortening the length of the pile by designing the tip of the pile on the ground with the intensity of soft rock as a method for utilizing the increased strength of the ultra-high strength PHC.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.3
• /
• pp.213-225
• /
• 2021

Objectives: This study identifies the trends in possible and probable occupational disease among chromium workers and reviews the literature on domestic and foreign chromium workers to review the industries, biological exposure levels, and major results. Methods: The results of the Ministry of Employment and Labor's special health-screening program for hazard agents among workers from 2009 to 2019 were used. Also, the industries, biological exposure levels, and major results on chromium workers were reviewed using PubMed and RISS. Results: The average annual proportion of both possible and probable occupational disease for chromium workers has recently increased. The average annual proportion of possible and probable occupational disease that can occur was high for both men and women in their 60s or older by age and 10 to 14 years by work duration. By industry, possible occupational disease showed high in manufacturing. In the literature review, many electroplating-related chromium-workers reported high levels of exposure to blood and urine chromium, as did dental technicians; tannery, tile factory or glass mill workers; cement workers; and sodium bichromate workers. Furthermore, a number of main findings in recent studies have reported that chromium exposure is related to genetic toxicity among workers. Conclusions: In this study, the average annual rate of both possible and probable occupational disease in domestic chromium workers is increasing, and a body of literature shows that chromium exposure is related to genetic toxicity and associated indicators among workers, which requires more systematic study.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.3
• /
• pp.185-194
• /
• 2022

Coffee is one of the most consumed beverages in the world and is the second largest traded commodity after petroleum. Due to the great demand of this product, large amounts of waste is generated in the coffee industry, which are toxic and represent serious environmental problems. This study aims to study the possibility of recycling spent coffee grounds (SCG) as a mineral admixture by replacing the cement in the manufacturing of concrete. To recycle the coffee g rounds, the SCG was dried to remove moisture and fired in a kiln at 850 ℃ for 8 hours. Carbonized coffee grounds are produced as coffee grounds ash (CGA) through ball mill grinding. The chemical composition of the prepared coffee grounds ash was investigated using X-ray fluorescence (XFR). According to the chemical composition analysis, the major elements of coffee grounds ash are K₂O(51.74 %), CaO(15.92 %), P₂O₅(14.39 %), MgO(7.74 %) and SO₃(6.89 %), with small amounts of F₂O₃(0.66 %), SiO₂(0.59 %) and Al₂O₃(0.31 %) content. To evaluate quality and mechanical properties, substitutions of 5, 10, and 15 wt.% of coffee grounds ash (CGA) were tested. From the quality test results, the 28-day activity index of CGA5 reached 80 %, and the flow value ratio reached 96 %, which is comparable to the minimum requirement for second-grade FA. From the test results of the mortar, the optimal results have been found in specimens with 5 wt-% coffee grounds ash, showing good mechanical and physical properties.

• Asia Marketing Journal
• /
• v.15 no.3
• /
• pp.15-29
• /
• 2013

Shopping is considered a 'must-do' activity for most people on travel. One of the major parts of tourist shopping is the purchasing of souvenirs. Souvenirs are universally associated with tourism as a commercially produced and purchased object to remind the purchaser of the experience. Recently, Korea becomes one of the most popular destinations that many Asian tourists like to visit. Among those Asian tourists, the number of Thai tourists bound for Korea shows an incredible rapid growth. Thai people pick Korea and Seoul as their favorite country and city to visit for three consecutive years since 2009. One of the major reasons why Thais are choosing to tour Korea is the enthusiasm for Korean pop culture. That is, 'Hallyu' has influenced Thais' decision to visit Korea and purchase Korean products. The primary objective of the current research is to explore the shopping experiences of Thai tourists, specifically their souvenir shopping. It adopts a reflexive interpretive approach to bring light to the various meanings Thai tourists attach to the souvenirs they purchase in Korea. In order to accomplish the objective, the individual interviews were conducted. A total of 12 Thais who have experienced traveling in Korea participated in the study. Four themes were identified through interview text analysis. First, the research participants almost always purchase souvenirs in Korea because the souvenirs represent their identities as tourists. Especially, they purchase the souvenirs as gifts for others, including family members, friends, and colleagues. The souvenirs as gifts show love and thanks to others, and they cement the social relationship. However, purchasing souvenirs for others is more like the moral obligations which evoke the psychological stress. Secondly, the research participants feel closer to Korea while shopping souvenirs around. Thirdly, they obtain imaginative experiences and pleasure through souvenirs related to the Korean pop culture. Souvenirs provide them to visually extraordinary experiences. Lastly, souvenirs purchased in Korea act as visible status marker when they go back to Thailand. They show the socioeconomic status and lifestyles. Tourists themselves and others place special value to souvenirs that were purchased out of Thailand. The findings of this study are of both academic and practical importance. Souvenirs are among the most pervasive elements of the travel experience. However, souvenir shopping is the complicated consumer behavior within tourism both from business and social science perspectives. Along the same line, it needs strategic approaches in order to maximize the economy effects. It concludes by suggesting how further research could offer unique insights into how the souvenirs are positioned both in the context of tourism academics and industry.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.6
• /
• pp.66-73
• /
• 2023

The construction industry suffers losses due to failures in demand forecasting due to price fluctuations in construction raw materials, increased user costs due to project cost changes, and lack of forecasting system. Accordingly, it is necessary to improve the accuracy of construction raw material price forecasting. This study aims to predict the price of construction raw materials and verify applicability through the improvement of the Data Refactor technique. In order to improve the accuracy of price prediction of construction raw materials, the existing data refactor classification of low and high frequency and ARIMAX utilization method was improved to frequency-oriented and ARIMA method utilization, so that short-term (3 months in the future) six items such as construction raw materials lumber and cement were improved. ), mid-term (6 months in the future), and long-term (12 months in the future) price forecasts. As a result of the analysis, the predicted value based on the improved Data Refactor technique reduced the error and expanded the variability. Therefore, it is expected that the budget can be managed effectively by predicting the price of construction raw materials more accurately through the Data Refactor technique proposed in this study.

• Journal of Soil and Groundwater Environment
• /
• v.7 no.4
• /
• pp.31-39
• /
• 2002

Pollutants from industry, mining, agriculture, and other sources have contaminated sediments in many surface water bodies. Sediment contamination poses a severe threat to human health and environment because many toxic contaminants that are barely detectable in the water column can accumulate in sediments at much higher levels. The purpose of this study was to make optimal treatment and disposal plan o( sediment for water quality improvement in small-scale resevoir based on an evaluation of degree of contamination. The degree of contamination were investigated for 23 samples of 9 site at different depth of sediment in small-scale J river. Results for analysis of contaminated sediments were observed that copper concentration of 4 samples were higher than the regulation of hazardous waste (3 mg/L) and that of all samples were exceeded soil pollution warning levels for agricultural areas. Lead and mercury concentration of all samples were detected below both regulations. Necessary of sediment dredge was evaluated for organic matter and nutrient through standard levels of Paldang lake and the lower Han river in Korea and Tokyo bay and Yokohama bay in Japan. The degree of contamination for organic matter and nutrient was not serious. Compared standard levels of Japan, America, and Canada for heavy metal, contaminated sediment was concluded as lowest effect level or limit of tolerance level because standard levels of America and Canada was established worst effect of benthic organisms. The optimal treatment method of sediment contained heavy metal was cement-based solidification/stabilization to prevent heavy metal leaching.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.1
• /
• pp.8-16
• /
• 2024

Limestone (CaCO₃, calcium carbonate), which is used as a raw material in the portland cement and steel industry, emits CO₂ through decarbonation by high temperatures in the manufacturing process. To reduce CO₂ emissions by the use of raw materials like limestone, it has been proposed to replace limestone with various industrial by-products that contain CaO but less or none of the carbonated minerals, that cause CO₂ emissions. Loss of Ignition (LOI), Thermogravimetric analysis (TG), and Infrared Spectroscopy (IR) are used to quantitative the amount of CO₂ emission by using these industrial by-products, but CO₂ emissions can be either over or underestimated depending on the characteristics of by-product materials. In this study, we estimated CO₂ contents by LOI, TG, IR and DTG(Differential Thermogravimetric analysis) of calcite(CaCO₃) and samples that contain CO₂ in the form of carbonate and whose weight increases by oxidation at high temperatures. The test results showed for CaCO₃ samples, all test methods have a sufficient level of reliability. On the other hand, for the CO₂ content of the sample whose weight increases at high temperature, LOI and TG did not properly estimate the CO₂ content of the sample, and IR tended to overestimate compared to the predicted value, but the estimated result by DTG was close to the predicted valu e. From these resu lts, in the case of samples that contain less than a few percent of CO₂ and whose weight increases during the temperature that carbonate minerals decompose, estimating the CO₂ content using DTG is a more reasonable way than LOI, TG, and IR.