• Textile Coloration and Finishing
• /
• v.17 no.4 s.83
• /
• pp.35-40
• /
• 2005

Researches to preserve and restore the excavated cellulose fabrics as costume heritages have been carried out. In this study, in order to artificially restore an excavated cellulose fabrics, acid-treated cellulose fabrics were prepared. Three kinds of cellulose fabrics were used for an experiment. Three kinds of cellulose fabrics were treated by the acid aqueous solution for the various strength retention ($100\%,\;80\%,\;60\%,\;40\%,\;20\%$). The fine structure and physical properties of acid treated cellulose fabrics were investigated with various techniques such as wide-angle X-ray diffraction, tensile test, weight loss, shrinkage, SEM etc. Tensile strength and strain of cellulose fabrics decreased with increasing acid treatment time. However, weight loss and shrinkage increasing slightly. The crystal diffraction intensity was not changed. SEM results of acid-treated cellulose fabrics show that the surface was damaged.

• The Research Journal of the Costume Culture
• /
• v.24 no.6
• /
• pp.777-787
• /
• 2016

This study was carried out in order to provide useful data for planning fabrics of summer eco-friendly fashion products. The fabrics used in this study were four cellulose fibers: cotton, cotton/mulberry blended, flax, and flax/lyocell blended. Dyeing with natural indigo was carried out under three different reducing conditions (i.e., general, eclectic, and eco-friendly) that have different reducing agent and pH levels, and hydrosulfite and glucose were used as a reducing agent. The dye uptake (K/S value) of fabrics dyed with natural indigo by a reducing condition was the highest at 660nm. Regardless of the fabrics, dye uptake was the highest under the general reducing condition and the lowest under the eco-friendly reducing condition. Under different reducing conditions, the dye uptake of natural indigo fabrics with the maximum absorption wavelength indicated a difference. The colorfastness of cellulose fabrics that were dyed with natural indigo had a rate of 4 to 5 except for rubbing fastness, which indicated good colorfastness. Additionally, natural indigo-dyed cotton and flax fabrics had good antibiosis. When the color characteristics of fabrics dyed with natural indigo were measured, all of the three reducing conditions created purple blue (PB) colors, and the color characteristics of dyed fabrics by reducing condition and fabric showed significant differences.

• Textile Coloration and Finishing
• /
• v.20 no.5
• /
• pp.1-6
• /
• 2008

3-(Hydroxyphenyl phosphinyl) propanoic acid (HPPA) has been one of the most commonly used durable flame retardant agents for polyethylene terephthalate (PET) for many years. We intended to explore the application of HPPA to cellulose fabrics as formaldehyde-free phosphorus based flame retardants (FRs) through green chemistry process. The flame retardancy of the flame-retardant treated cellulose fabrics were characterized by using inductively coupled plasma spectroscopy (ICP) and limiting oxygen index (LOI). Structural changes of the treated cellulose fabrics were carried out by thermogravimetric analysis (TGA) and Fourier transform infrared (FT-IR) spectroscopy. To enhance the flame retardancy of HPPA treated cellulose fibers, glycerol polyglycidyl ether (GPE), a crosslinking agent was employed. Both HPPA and GPE treated cotton fabric imparted an LOI value over 26.

• Fashion & Textile Research Journal
• /
• v.24 no.2
• /
• pp.260-266
• /
• 2022

Cellulose fiber is a material used in various fields. It is the most used type of fiber because of its excellent hygroscopicity and dyeability. Recently, as natural fiber materials have been highlighted due to the influence of eco-friendliness and well-being, bamboo fiber has become a commonly used eco-friendly fiber. Cellulose fibers are part of the -OH hydroxyl group, which means they are more chemically reactive than synthetic fibers. In this study, the cationization properties of bamboo-cotton blended fabrics cationized using CHPTAC (3-chloro-2-hydroxypropyl trimethyl ammonium chloride) in the PDC (padding-drying-curing) method were investigated. Various characteristics according to cationization were studied through elemental analysis, FT-IR (fourier-transform infrared spectroscopy) analysis, X-ray diffraction analysis, TGA (thermogravimetric) analysis, and SEM (scanning electron microscope) analysis. The nitrogen content of the cationized bamboo-cotton blended fabric increased with an increase in the concentration of the cationizing agent CHPTAC, and it was seen to be highly bound to cellulose molecules. As a result of the FT-IR analysis, both 100% pure cotton fabrics and CHPTAC-0 and CHPTAC-150 fabrics were seen to be typical cellulose. As a result of the X-ray diffraction analysis, both 100% pure cotton fabrics and CHPTAC-0 and CHPTAC-150 fabrics showed typical cellulose I structures. As a result of the X-ray diffraction analysis, both 100% pure cotton fabrics and CHPTAC-0 and CHPTAC-150 fabrics showed typical cellulose I structures. As the cationization progressed, micropores appeared on the surface of the blended fabric.

• International Journal of Human Ecology
• /
• v.8 no.1
• /
• pp.1-8
• /
• 2007

Degradation of cellulose during prolonged exposure in atmospheric conditions has been recognized as one of main problems in preserving cellulose-made products. The purpose of this research was therefore to study effects of borohydride reduction in improving both the color and strength retention of cotton fabrics artificially aged at temperatures ranging from $100^{\circ}C$ to $150^{\circ}C$. Results indicated that the fabrics treated with either sodium or tetramethylammonium borohydrides (TMA) were degraded at rates about one-half that of water-washed cotton. These results were consistent over the temperature range. Calculation of the activation energy (Ea) by different methods showed $Ea\;=\;25.5{\pm}\;1.5\;Kcal$, in keeping with measurements made by others at lower temperatures. The TMA-treatment was effective in minimizing discoloration of the fabrics with pre-baking, but not of the un-prebaked fabrics.

• Textile Coloration and Finishing
• /
• v.7 no.1
• /
• pp.10-22
• /
• 1995

Cellulosic fabrics, i.e. rayon, polynosic, and linen were treated with liquid ammonia at -33.4$^{\circ}C$. The fine structures, bending properties, tensile strength, wrinkle recoveries, and dyeing properties of the treated fabrics were studied. Dyeing was carried out with two direct dyes, C. I. Direct Red 2 and Blue 1. The liquid ammonia treatment for three fabrics brought about the transition of crystal lattices and the decrease of crystallinity; transforming cellulose I structure of original linen to cellulose I and III structure, and cellulose II structure of original rayon and polynosic to cellulose II and III structure. Moisture regain of liquid ammonia- treated polynosic and linen was higher than that for untreated, and water absorbency of liquid ammonia-traeated fabrics was all lower than that of untreated. Also, bending properties of treated fabrics were not improved compared with those of untreated ones. The rayon treated with liquid ammonia was increased not only the apparent diffusion coefficient and the rate of dyeing but also equilibrium dye adsortion, whereas polynosic and linen were increased only equilibrium dye adsortion. It is suggested that the pore sizes of liquid ammonia-treated rayon, polynosic, and linen are much smaller than that of liquid ammonia-treated cotton.

• Textile Coloration and Finishing
• /
• v.30 no.4
• /
• pp.245-255
• /
• 2018

In this study, cotton fabrics were coated with $TiO_2$ nanoparticles using 3-mercaptopropyltrimethoxysilane(3-MPTMS), which is highly reactive to cotton fabrics, as a medium, and the characteristics, antimicrobial properties, and photodegradation properties of the fibers were measured. The manufacturing process is as follows. (1) 3-MPTMS was added to isopropanol, and $TiO_2$ colloid was added to the mixture to prepare a solution. (2) Cellulose fibers were immersed in the prepared $3-MPTMS/TiO_2$ solution, stirred for 90 minutes at $45^{\circ}C$ in a constant temperature water bath, and dried thereafter. In order to identify the morphology of the cellulose fibers coated with $TiO_2$ nanoparticles, the surface was observed with a scanning electron microscope(SEM), and SEM-EDS was measured to identify the adhesion of $TiO_2$ nanoparticles. The SEM images showed $TiO_2$ nanoparticle and 3-MPTMS coated layers on the fibers and it was identified that $TiO_2$ nanoparticles were attached to the cellulose fibers. The antimicrobial activity of $3-MPTMS/TiO_2$-treated cotton fabrics was measured using a bacterial reduction method. $3-MPTMS/TiO_2$ cellulose fibers which was irradiated by ultra violet light, showed antimicrobial activity against Escherichia coli(ATCC 43895) and Staphylococcus aureus(ATCCBAA-1707) unlike unirradiated fibers. The cellulose fibers were stained with methylene blue and the photodegradation performance of the stained fabrics was analyzed. The stained fabrics showed high degradation performance with photolytic reactions of $TiO_2$ nanoparticles.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.8
• /
• pp.1130-1138
• /
• 2013

We examined dyeing properties using cotton, Tencel, general nylon 66 and hollow nylon 66 treated with aqueous and ethanol extracts without mordant. The antimicrobial properties of fabrics treated with Artemisia extracts against gram positive Staphylococcus aureus (S. aureus) and gram negative Klebsiella pneumonia (K. pneumonia) were also examined. The dying solution concentrations were determined from a calibration curve of the concentration and absorbance of Artemisia extracts. FTIR spectra confirmed that antimicrobial components and colorants (such as 1,8-cineol, thujone, caffeoylquinic acid and chlorophyll) were more present in ethanol extract than in aqueous extract. Nylons had higher $a^*$ and $b^*$, and lower $L^*$ values than cellulose fabrics dyed with aqueous solutions of Artemisia extracts; however, the dyed nylon fabrics were brown. Fabrics dyed with ethanol-extract added solutions were greener and had higher antimicrobial properties than those dyed with aqueous solutions; however, they faded and lost their antimicrobial properties after laundering. Fabrics regained their antimicrobial properties (especially against S. aureus) by the spraying of Artemisia ethanol extract; therefore, the application of Artemisia ethanol extract onto underwear is expected to relieve atopic dermatitis.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.5
• /
• pp.817-826
• /
• 2009

As UV radiation to the earth increased over recent years, many adverse effects of UV radiation have been reported. There are needs to develop UV-protective apparel and accessaries to protect skin from these harmful effects. Cellulose is one of the most frequently worn fiber during summer time. However, celllulose shows very low UV-protective property especially in case of thin and low fabric content. In this study, UV-protective cellulose textiles were developed using chiotsan mordanting and green tea dyeing. The repetition effect of chitosan and green tea treatment were focused. Three different cellulose fibers, cotton, linen, and ramie, were used for this study. All chitosan mordanted and green tea dyed fabrics showed increases in UV-protective property. The color of fabrics tended to darker as the numbers of mordanting process and green tea dyeing increased. UV-protective property did not increase significantly upon the repetition of mordanting and green tea dyeing treatment except ramie fabric. UV protective property was persisted upon washfastness test in all three cellulose fiber types.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.4
• /
• pp.27-33
• /
• 2013

Manufacturing fabrics from dissolving cellulosic pulp is increasing in these days. For making high quality of cellulose-based fabrics, control of cellulose DP (degree of polymerization), its alpha cellulose content, its brightness, and its crystallinity are important. To process the cellulosic raw material, refining of cellulosic fibers is essential, and it is important to know if refining affects those important cellulose properties. The effects of PFI mill and Valley beater refining on the alpha-cellulose content, cellulose DP, crystallinity, and paper mechanical properties of wood and two different cotton fibers were studied. The results showed that PFI mill refining rarely affected those properties. Fibers refined by a Valley beater displayed a small reduction in fiber length in comparison with those refined by a PFI mill. However, the Valley beater refining method produced almost no changes in cellulose properties, either. The refining process seemed to have very little effect on the cellulose DP, crystallinity index, or alpha-cellulose content until the freeness decreased to around 300 mL CSF for wood and 100 mL CSF for cotton fibers, respectively. There were also no differences in tensile strength development in two refining methods.