• 펄프종이기술
• /
• 제33권5호
• /
• pp.30-36
• /
• 2001

Caro's acid (persulphuric acid) has been proposed as a promising reagent used in pulping of lignocellu-losic materials. Bagass was subjected to caro's acid pulping under different pulping conditions of per acid concentration (2~8 percent), pulping temperatures (40~$60^{\circ}C$) and pulping time (120~240 min). The influence of different parameters of caro's acid pulping process on the chemical and strength properties of the produced pulps had been studied. Peracid concentration and pulping temperature are the most important variables of the pulping process. High degree of delignification and good deliberation were achieved at moderate pulping conditions in the studied range. Pulping experiments of bagasse by using caro's acid had been carried out for determination of the optimum comditions of the process. In inch case to effectively tackle the problem, a specific design of an experiment is selected depending on the goals to be achieved in the experimentation. The study could enable us to excepect the bagasse pulp properties (yield, Kappa number, DP) that be stated as function of the independent variables of caro's acid pulping process (per acid concentration, pulping temperature and pulping time).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.1909-1911
• /
• 2005

The electrical and chemical characteristics in transformer insulations are changed due to thermal stress. In the chemical property, as the Kraft paper ages, the cellulose polymer chains breakdown into shorter lengths with a corresponding decrease in both tensile strength and degree of polymerization(DP). Furthermore, cellulous chains breakdown is accompanied by an increase in the content of various furanic compounds within the dielectric liquid. It is known that furanic components in transformer oil come only from the decomposition of insulating paper rather than from the oil itself. Therefore the analysis of furan products provides a complementary technique to dissolved gas analysis for monitoring transformers when we evaluate the aging of insulating paper by the total concentration of carbon monoxide and carbon dioxide dissolved in oil only. In this paper the accelerated aging process of oil--paper samples have been investigated at a temperature up to $140^{\circ}C$ for 500 hours. The oil-paper insulation samples have been measured at intervals of 100 hours. For analysis we used high performance liquid chromatography(HPLC) in accordance with IEC 61198 method.

• Journal of Microbiology and Biotechnology
• /
• 제24권4호
• /
• pp.489-496
• /
• 2014

High levels of extracellular xylanase activity (211.79 IU/mg) produced by Paenibacillus sp. NF1 were detected when it was submerged-cultured. After three consecutive purification steps using Octyl-Sepharose, Sephadex G75, and Q-Sepharose columns, a thermostable xylanase (XynNF) was purified to homogeneity and showed a molecular mass of 37 kDa according to SDS-PAGE. The specific activity of the purified XynNF was up to 3,081.05 IU/mg with a 14.55-fold purification. The activity of XynNF was stimulated by $Ca^{2+}$, $Ba^{2+}$, DTT, and ${\beta}$-mercaptoethanol, but was inhibited by $Fe^{2+}$, $Zn^{2+}$, $Fe^{2+}$, $Cu^{2+}$, SDS, and EDTA. The purified XynNF displayed a greater affinity for oat spelt xylan with the maximal enzymatic activity at $60^{\circ}C$ and pH 6.0. XynNF, which was shown to be cellulose-free, with high stability at high temperature ($70^{\circ}C-80^{\circ}C$) and low pH range (pH 4.0-7.0), is potentially valuable for various industrial applications. The enzyme hydrolyzed oat spelt xylan to yield mainly xylooligosaccharides (95.8%) of 2-4 degree of polymerization (DP2-4). Moreover, the majority of the xylooligosacharides (DP2-4) products was xylobiose (61.5%). The thermostable xylanase (XynNF) thus seems potentially usefull in the production of xylooligosaccharides.

• 펄프종이기술
• /
• 제35권4호
• /
• pp.8-16
• /
• 2003

The objective of this study was to investigate the potential application of the separated refining system in the papermaking process using cotton pulps. The cotton staple and linter fibers were expected to show a great difference in their refining responses due to their morphological and physical differences. Experiments were conducted to examine the differences in flocculation tendency, CED viscosity, fiber length, handsheet properties and the SEM surface images between staple and linter fibers at a given refining degree. These fibers were also subjected to separated refining in a laboratory-scale beater and in a mill-scale refiner as well. The effect of the separated refining on the refining rates and papermaking properties were evaluated. Results obtained are summarized as follows: 1. Fiber flocculation tendency of cotton staple was estimated to be significantly greater than that of linter fibers; 2. The staple fibers showed higher cellulose DP, longer fiber length and higher sheet strength at a given refining degree compared to linter fibers, but remarkably slower refining rate was observed; 3. The separated refining system exhibited a significant increase in sheet strengths, especiauy in folding endurance, with an increase in the fibrillation on the surface of staple fibers, but slightly lower or comparable fiber length after refining to the mixed refining system; 4. Similar results were also obtained from the machine trial in which about 7-8％ energy saving effects were achived in the separated refining system. On the basis of the results observed in this study, it was concluded that a significant increase in paper strength and a substantial reduction in refining energy consumption could be achieved using the separated refining system for the cotton staple and linter fiber stock refining.