• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.9
• /
• pp.10-17
• /
• 1994

In this paper, a priority schedling and a flow control algorithm with hysteresis effect are proposed for high-speed networks. A mathematical model for the flow control is proposed and a cell transition probability from this model is found. And the performance of the proposed algorithm is analyzed by a computer simulation. According to the simulation results, it can be shown that the priority scheduling and the flow control with hysteresis effect get the cell loss probability 0.061 better and the average delay 100ms better and the average delay 100ms beter than those of single threshold.

• Journal of Communications and Networks
• /
• v.14 no.3
• /
• pp.252-256
• /
• 2012

We consider resource allocation in femto-cell networks to maximize the throughput while minimizing interference to macro-users nearby. This can be achieved by allocating spectrum resource in a cognitive radio way. The proposed resource allocation is performed in two steps; spectrum sensing and resource scheduling. The femto base station detects idle frequency assignments (FAs) free from the occupation by macro-users and then allocates sub-channels in an idle FA to femto-users, effectively managing the interference problem. Finally, the effectiveness of the proposed scheme is verified by computer simulations.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.461-462
• /
• 2010

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.95-96
• /
• 2013

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.07a
• /
• pp.136-136
• /
• 2004

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.10a
• /
• pp.291-296
• /
• 2001

The computerized automation of modern manufacturing system is tremendously important for the cost reduction. Recently, the automation is being realized by Computer Integrated Manufacturing (CIM) concept and the unmanned factory is the final goal of the automation. The automation of the low level of factory is the most crucial and difficult aspect in total CIM environment since various machines are involved. A cell is defined as a manufacturing group of closely related machineries in the entire factory hierarchy, The management scheme for a cell controller is defined from the software viewpoint. The domain of a cell is designed with tasks(processes) in a multiple-task operating system. The operation of the cell is established by defining schemes for overall control of the cell domain, databases, job scheduling, communications within the domain, user-interface and communications with outside machines. Although the software is developed in a specific operating system and WINDOW facilities, the operating strategies can be applied globally.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.393-397
• /
• 2001

This paper addresses an Intelligent Agent-based Open Architecture Cell Controller for Intelligent Manufacturing System(IMS). With an Intelligent Agent approach, the IMS will be a independent, autonomous, distributed system and achieve a adaptability to change of manufacturing environment. As the development methodology of Open Architecture Cell Controller, an object-oriented modeling technique is employed for building models associated with IMS operation, such as resource model, product model, and control model. Intelligent Agent-based Open Architecture Cell Controller consists of two kinds of dependant agents, that are the active agent and the coordinator agent. The Active agent is contributed to control components of IMS in real-time. The coordinator agent has great role in scheduling and planning of IMS. It communicates with other active agents to get information about status on system and generates the next optimal task through the making-decision logic and dispatch it to other active agent.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.2
• /
• pp.142-148
• /
• 2005

This paper proposes a cell age model for Penicillium chrysogenum fed-batch cultivation to supply a qualitative insight into morphology-associated dynamics. The average ages of the segregated cell populations, such as growing cells, non-growing cells and intact productive cells, were estimated by this model. A combined model was obtained by incorporating the aver-age ages of the cell sub-populations into a known but modified segregated kinetic model from literature. For simulations, no additional effort was needed for parameter identification since the cell age model has no internal parameters. Validation of the combined model was per-formed by 20 charges of industrial-scale penicillin cultivation. Meanwhile, only two charge-dependent parameters were required in the combined model among approximately 20 parameters in total. The model is thus easily transformed into an adaptive model for a further application in on-line state variables prediction and optimal scheduling.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.6
• /
• pp.128-136
• /
• 1995

The problem addressed in this paper is that of the on-line computational burden of time-optimal control laws for quick, strongly nonlinear systems like revolute robots. It will be demonstrated that a large amount of off-line computation can be substituted for most of the on-line burden in cases of time optimization with constrained inputs if differential point-to- point specifications can be relaxed to cell-to-cell transitions. These cells result from a coarse discretization of likely swaths of state space into a set of nonuniform, contiguous volumes of relatively simple shapes. The cell boundaries approximate stream surfaces of the phase fluid and surfaces of equal transit times. Once the cells have been designed, the bang- bang schedules for the inputs are determined for all likely starting cells and terminating cells. The scheduling process is completed by treating all cells into which the trajectories might unex- pectedly stray as additional starting cells. Then an efficient-to-compute control law can be based on the resulting table of optimal strategies.

• Journal of Digital Contents Society
• /
• v.3 no.1
• /
• pp.47-57
• /
• 2002

Recently, wireless networks have been pursuing multimedia data service as voice, data, image, video and various form of data according to development of information communication technology. It guarantees cell delivery delay of real time data in efficient real time multimedia data transfer. Also, it minimizes cell loss rate of non-real time multimedia data. In the wireless ATM, there are based on Asynchronous Transfer Mode(ATM). It implies that there are various service with difficult transmission rates and qualities in the wireless communication network. As a result, it is important to find out the ways to guarantee the Quality of Service(QoS) for each kind of traffic in wireless network. In this thesis, we propose an improved TCRM scheduling algorithms for transmission real-time multimedia data service in wireless ATM Networks. We appear real time multimedia scheduling policy that apply each different method to uplink and downlik to wireless ATM network. It can guarantee QoS requirements for each real time data and non-real time data. It also deals the fairness problem for sharing the scarce wireless resources. We solve fault of TCRM as inefficient problem of non-real data by using arbitrary transmission speed and RB(Reservation Buffer) through VC(Virtual Control) and BS(Base Station).