• 아시안잔디학회지
• /
• 제13권4호
• /
• pp.191-200
• /
• 1999

The objective of this study was to improve the recycling rate of coal ash fly, industrial waste. This study was conducted to analyze the physico-chemical properties of \"CellCaSi\" and clarify the effects on the growth of Kentucky bluegrass(Poa pratensis L.) and creeping bentgrass(Agrostis paulstris Huds \"Penncross\") and the chemical properties of soil, which was cellular calcium silicate reproduced by coal ash fly. A field assay was carried out in Young-Pyong Golf Course. The results were as follows. 1. The main chemical composition of CellCaSi was $SiO_2$(45~55%) and CaO(25~35), which was 70~90% of total weight. CellCaSi showed pH 8~9. Bulk density of CellCaSi was 0.35~0.45g/㎤. Water content of CellCaSi was 52.5~67.5%. 2. In the applied plots, leaf width, grass density per $1\textrm{cm}^2$, rhizome number and length per plant, and root number per plant of Kentucky bluegrass(Poa pratensis L.) and creeping bentgrass(Agrostis paulstris Huds \"Penncross\") showed increasing tendency compared with the control. The application of CellCaSi increased the growth of turfgrasses. Their visual quality on hardness, grass shoot density per $1\textrm{cm}^2$ and root growth was very good. And, their visual quality on rhizome growth was good. 3. After the application of CellCaSi, pH, CEC, Ex-cation of the applied soil showed increasing tendency with the little range, $SiO_2$content increasing tendency considerably, and organic matter content decreasing tendency compared with the control.ncy compared with the control.

• Journal of the Korean Wood Science and Technology
• /
• 제44권2호
• /
• pp.157-165
• /
• 2016

This study investigated several anatomical characteristics of Paulownia tomentosa roots. The root wood was separated into three parts from stem base (top, middle, and base) at different positions below ground. Qualitative anatomical data suggested that the growth rings in earlywood and latewood were structurally different. Furthermore, the root wood vessels were found having 2 to 3 radial multiples and they were appeared in the form of clusters. In addition, some sheath cells and septate axial parenchyma were observed. Regarding the quantitative anatomical characteristics, vessel and ray numbers per $mm^2$, as well as ray width and height differed significantly among the top, middle, and base rood wood parts. However, there were no significant differences in vessel diameters, cell wall thickness, and width and length of wood fibers among those parts. The crystallinity of the root top part was slightly higher than that of the middle and base parts. Furthermore, the vessel numbers, ray numbers, and ray width and height in the near pith (NP) area were higher compared to those in the near bark (NB) area. However, the fiber width and fiber length at NP were lower than those at NB. Overall, this study demonstrated some significant differences in the anatomical characteristics of the top, middle, and base parts of root wood from Paulownia tomentosa.

• Applied Microscopy
• /
• 제28권1호
• /
• pp.49-62
• /
• 1998

To investigate the morphological changes of epithelial cells of ductus epididymides by sperm entrance, the Korean striped field mouse, Apodemus agrarius coreae was studied with light and transmission electron microscopy. 1. The diameters of the caput epididymis (Cp) and its lumen were $135\sim145{\mu}(140{\pm}0.5{\mu})$ and $115\sim120{\mu}m(117{\pm}0.1{\mu}m)$. The length and width of the epithelium were $27.0\sim28.5{\mu}m(28.0{\pm}0.1{\mu}m)$ and $4.8\sim5.4{\mu}m(5.1{\pm}0.2{\mu}m)$. 2. The diameters of the corpus epididymis (Cr) and its lumen were $160\sim170{\mu}m(166{\pm}0.2{\mu}m)$ and $140\sim150{\mu}m(145{\pm}0.3{\mu}m)$. The length and width of the epithelium were $17.4\sim18.0{\mu}m(17.6{\pm}0.5{\mu}m)$ and $8.8\sim10.4{\mu}m(9.5{\pm}0.2{\mu}m)$. 3. The diameters of the cauda epididymis (Cu) and its lumen were $270\sim280{\mu}m(275{\pm}0.2{\mu}m)$ and $265\sim275{\mu}m(268{\pm}0.3{\mu}m)$. The length and width of the epithelium were $11.2\sim13.4{\mu}m(12.3{\pm}0.3{\mu}m)$ and $9.2\sim11.2{\mu}m(10.0{\pm}0.2{\mu}m)$. Therefore, the size of diameter and lumen of the ductus epididymides and the width of the epithelium increased from Cp and Cr to Cu, but the length of epithelial cells decreased from Ca and Cr to Cu. These data suggest that the morphological changes of epithelial cells of the ductus epididymides may be the results of the sperm entrance.

• 한국광학회지
• /
• 제10권2호
• /
• pp.152-156
• /
• 1999

여기밀도 변화에 따른 펄스폭 연속 가변 Quenched Dye Laser(Q이)를 설계 제작하여 그 동작 특성을 분석하였다. 펌핑광원은 펄스폭 20 ns(FWHM), 에너지 150mJ의 XecCl 엑시머 레이저를 사용하였으며, 색소레이저의 활성매질은 Rhodamine 6G로서 에탄올(ethanol)용액에 2.5$\times$10-3[mol/l]의 농도로 용해되었다. 활성길이 5 nm인 색소셀에서 서로 평행한 양면을 공진기로 구성하여 색소레이저의 이완발진 출력특성을 얻었다. 이완발진의 펄스열에서 단일 펄스를 추출하기 위해 QDL를 구성하였다. QDL의 펄스폭을 가변하기 위해 초점거리 f=150 mm 접속렌즈를 이동시켜 색소셀에 조사되는 공간적 펌핑폭을 조절함으로써 여기밀도를 8.8$\times$1023[cm-3s-1]~2.8$\times$1023[cm-3s-1]까지 가변시켰다. 공간적 펌핑폭에 따른 펄스폭 가변 실험을 수행한 결과 QDL의 발진 펄스폭이 86 ps~201 ps 사이에서 연속적으로 가변됨을 알 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제36권3호
• /
• pp.55-60
• /
• 2008

본 연구는 목재의 재질에 대한 목탄 시용의 효과를 구명하기 위하여 수행되었다. 그 결과 묘목의 연륜폭은 대조구보다 목탄시용구에서 더 넓은 것으로 나타났다. 목탄시용에 있어서, 낙엽송탄이 가장 큰 연륜폭을 나타냈고 다음으로 잣나무탄, 파티클보오드탄, 상수리탄 순으로 나타났다. 만재율과 비중은 목탄시용구가 대조구보다 낮았으며 낙엽송탄에서 가장 낮았다. 가도관장은 대조구보다 분말탄 시용구에서 길게 나타났지만 입상탄에서는 유의한 차이가 없는 것으로 나타났다. 가도관폭은 목탄시용구와 무처리구 간에 유의한 차이가 없는 것으로 나타났다. 세포벽두께도 조재부의 경우 목탄시용구와 무처리구간에 유의한 차이가 없는 것으로 나타났으나, 만재부의 경우는 목탄시용구가 무처리구 보다 큰 것으로 나타냈다. 마이크로피부릴 경각은 입상탄 시용구에서 대조구보다 작은 것으로 나타났지만 분말탄 시용구와 입상탄 시용구 간에는 유의한 차이가 없는 것으로 나타났다. 모든 처리구에서 분말탄과 입상탄간에는 차이가 없는 것으로 나타났다.

• 전기전자학회논문지
• /
• 제25권2호
• /
• pp.350-355
• /
• 2021

IGBT는 MOSFET과 BJT의 구조를 동시에 포함하고 있는 전력반도체 소자이며, MOSFET의 빠른 스위칭 속도와 BJT의 고 내압, 높은 전류내량 특성을 갖고 있다. GBT는 높은 항복전압, 낮은 V_CE-SAT, 빠른 스위칭 속도, 고 신뢰성의 이상적인 파워 반도체 소자의 요구사항을 목표로 하는 소자이다. 본 논문에서는 1,200V 급 Trench Gate Field Stop IGBT의 상단 공정 파라미터인 Gate oxide thickness, Trench Gate Width, P+ Emitter width를 변화시키면서 변화하는 Eoff, V_CE-SAT을 분석하였고, 이에 따른 최적의 상단 공정 파라미터를 제시하였다. Synopsys T-CAD Simulator를 통해 항복전압 1,470V와 V_CE-SAT 2.17V, Eon 0.361mJ, Eoff 1.152mJ의 전기적 특성을 갖는 IGBT 소자를 구현하였다.

• 한국정보통신학회논문지
• /
• 제20권2호
• /
• pp.306-316
• /
• 2016

본 논문에서는 프로그램 선택 소자는 채널 폭이 큰 NMOS (N-channel MOSFET) 트랜지스터 대신 DNW (Deep N-Well) 안에 형성된 채널 폭이 작은 isolated NMOS 트랜지스터의 body인 PW (P-Well)과 source 노드인 n+ diffusion 영역 사이에 형성된 기생하는 접합 다이오드를 사용하는 NMOS-Diode eFuse OTP (One-Time Programmable) 셀을 제안하였다. 제안된 eFuse OTP 셀은 프로그램 모드에서 NMOS 트랜지스터에 형성되는 기생하는 접합 다이오드를 이용하여 eFuse를 blowing 시킨다. 그리고 읽기 모드에서는 접합 다이오드를 이용하는 것이 아니고 NMOS 트랜지스터를 이용하기 때문에 다이오드의 contact voltage 강하를 제거할 수 있으므로 '0' 데이터에 대한 센싱불량을 제거할 수 있다. 또한 읽기 모드에서 채널 폭이 작은 NMOS 트랜지스터를 이용하여 BL에 전압을 전달하므로 OTP 셀의 blowing되지 않은 eFuse를, 통해 흐르는 읽기 전류를 $100{\mu}A$ 이내로 억제하여 blowing되지 않은 eFuse가 blowing되는 문제를 해결할 수 있다.

• Transactions on Electrical and Electronic Materials
• /
• 제13권5호
• /
• pp.233-236
• /
• 2012

The driving properties of a particle-insertion method that filters non-moving particles are analyzed, by measuring its optical and electrical properties. An area that is occupied by the moved particles is proposed, as a desirable evaluation method for a reflective display. To compare the driving property of the particle-moving method with that of the reported simple particle-loading method, two panels are fabricated, according to the different particle-insertion methods, in the same panel condition, of which the width of ribs is $30{\mu}m$, the cell size is $220{\mu}m{\times}220{\mu}m$, the cell gap is $116-120{\mu}m$, the q/m value of the black particles is $+1.8{\mu}C/g$ and that for the white particles is $-4.3{\mu}C/g$. The particle-moving method has a filtering effect which excludes the non-moving particles, inserting only movable particles into the respective cell, so that a panel fabricated by the particle-moving method can drive most of the particles in a cell. Also, most of the particles move at the threshold voltage of 40 V, with enhanced reflectivity. The driving property is also verified by measurement of the occupation rate of the moved particles.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 추계 학술발표회
• /
• pp.291-311
• /
• 2006

The acceleration of consolidation by stone columns was mostly analysed within the framework of a basic unit cell model (i.e. a cylindrical soil body around a column). A method of converting the axisymmetric unit cell into the equivalent plane-strain model would be required for two-dimensional numerical modelling of multi-column field applications. This paper proposes two practical simplified conversion methods to obtain the equivalent plane-strain model of the unit cell, and investigates their applicability to multi-column reinforced ground. In the first conversion method, the soil permeability is matched according to an analytical equation, whereas in the second method, the column width is matched based on the equivalence of column area. The validity of these methods is tested by comparison with the numerical results of unit-cell simulations and with the field data from an embankment case history. The results show that for the case of linear-elastic material modelling, both methods produce reasonably accurate long-term consolidation settlements, whereas for the case of elasto-plastic material modelling, the second method is preferable as the first one gives erroneously lower long-term settlements, where plastic yielding of stone column are ignored.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.397-398
• /
• 2008

This paper performed the basic study for fabricating the low level laser therapy apparatus, and one of the goals of this paper was to make this apparatus used handily. The apparatus has been fabricated using the 655nm laser diode and microprocessor unit. The apparatus used a 655 nm laser diode for laser medical therapy and was designed for a pulse width modulation type to increase stimulation effects. And then, each experiment was performed to irradiation group and non-irradiation group for cells. MTT assay method was chosen to verify the cell increase of two groups and the effect of irradiation on cell proliferation was examined by measuring 590nm transmittance of ELISA reader. As a result, the cell increase of cells was verified in irradiation group as compared to non-irradiation group.