• Journal of the Korean Geotechnical Society
• /
• v.20 no.1
• /
• pp.109-120
• /
• 2004

There has been outstanding research on the soil-water characteristic curves of unsaturated soils over the past several decades. Unfortunately, unsaturated soil mechanics has not been considered as an important factor in Korea. In this paper, laboratory test and numerical analysis(SoilVision Professional ver 3.04) were performed to investigate the prediction method of soil-water characteristic curve and unsaturated permeability coefficient in reclaimed ground. The pressure cell, desiccator, and tensiometor tests were conducted on three types of reclaimed soils(dredged soil, sand, weathered granite soil). Numerical analysis was executed to compare the results with the laboratory test results and also compared with the results of each prediction method. Based on the laboratory test, three different types of soils have shown different soil-water characteristic curves. The hysteresis fir these soils is clearly defined. As a result of numerical analysis, Fredlund & Xing's method and Fredlund & Wilson's model proved to worke out well for reclaimed ground soils in Korea. Also, predicting method based on the soil-water characteristic curves from the particle-size distributions is flirty reliable for estimating unsaturated permeability coefficient.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.9
• /
• pp.23-30
• /
• 2012

This paper is research results of slope stability analysis associated with seepage infiltration for unsaturated soil in debris-flow occurrence slopes. Site investigations were carried out in two slopes, located at Inje in Kangwon province where debris flow occurred in 2006 and at Yangpyung in Kyeunggi province where it occurred in 2010. For unsaturated soil sampled at the zone of debris-flow initiation, soil water characteristic curves with tempe pressure cells and shear strength parameters with newly designed shear strength apparatus were obtained respectively. The commertially available software SEEP/W was used to analyze seepage infiltration in unsaturated soil, based on their properties obtained from test results and the actual rainfall data at the moment of debris flow occurrence, and slope stability analysis with the program of SLOPE/W, associated with results of seepage analysis, was performed to simulate slope failure. As results of this research, seepage infiltration to unsaturated soil due to intensive rainfall was found to cause increase of ground water table as well as degree of saturation. Through this research slope stability analysis for unsaturated soil, considering the actual rainfall characteristic, might be a reasonable method of investigating characteristics of debris flow behavior, in particular, the moment of debris flow occurrence.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.12
• /
• pp.41-51
• /
• 2012

Soils are commonly unsaturated in the near surface. The stiffness of soils is affected by the amount of air and water. The objective of this study is to evaluate the porosity of the unsaturated soils by using the elastic waves including compressional and shear waves. The elastic waves are measured at different degrees of saturation by controlling the matric suction. Thus, the unsaturated soils are characterized at different levels of the matric suction. Shear and compressional waves are measured by using the bender elements and the piezo disk elements, respectively. Both transducers are installed on the walls of the rectangular cell. The unsaturated soils are prepared by using uniform size sands and silts. Test results show that both compressional and shear wave velocities change according to the matric suction. The elastic modulus, the shear modulus, and the Poisson's ratio are estimated based on the measured elastic wave velocities. In addition, the void ratio of the unsaturated soils estimated using elastic wave velocities matches well with the volume based void ratio. This study demonstrates that the elastic waves can be effectively used for the characterization of unsaturated soils.

• KSBB Journal
• /
• v.21 no.2
• /
• pp.133-139
• /
• 2006

In 'solid-phase' PEGylation, the conjugation reaction occurs as the proteins are attached to a solid matrix, and thus it can have distinct advantages over the conventional, solution-phase process. We report a case study: rhIFN-${\alpha}$-2a was first adsorbed to cation exchange resin and then N-terminally PEGylated by aldehyde mPEG of 5, 10, and 20 kD through reductive alkylation. After the PEGylation, salt gradient elution efficiently recovered the mono-PEGylate in a purified form from the unwanted species such as unmodified IFN, unreacted PEG, and others. The mono-PEGylation and its purification were integrated in a single chromatographic step. Depending on the molecular weight of the mPEG aldehyde used, the mono-PEGylation yield ranged 50-64%. We could overcome the major problems of random, or uncontrollable, multi-PEGylation and the post-PEGylation purification difficulties associated with the solution-phase process. N-terminal sequencing and MALDI-TOF MS confirmed that a PEG molecule was conjugated only to the N-terminus. Compared with the unmodified IFN, the mono-PEGylate showed the reduced anti-viral activity as measured by the cell proliferation assay. The bioactivity was reduced more as the higher molecular weight PEG was conjugated. Immunoreactivity, evaluated indirectly by antibody binding activity using a surface plasmon resonance biosensor, also decreased. Nevertheless, trypsin resistance as well as thermal stability was considerably improved.

• Korean Chemical Engineering Research
• /
• v.45 no.3
• /
• pp.242-248
• /
• 2007

For an optimal design of automotive electric system, it is important to have a reliable modeling tool to predict the charge-discharge behaviors of the automotive battery. In this work, a two-dimensional modeling was carried out to predict the charge-discharge behaviors of a 12-V automotive lead-acid battery. The model accounted for electrochemical kinetics and ionic mass transfer in a battery cell. In order to validate the modeling, modeling results were compared with the experimental data of the charge-discharge behaviors of a lead-acid battery. The discharge behaviors were measured with three different discharge rates of C/5, C/10, and C/20 at operating temperature of $25^{\circ}C$. The batteries were charged with constant current of 30A until the charging voltage reached to a predetermined value of 14.24 V and then the charging voltage was kept constant. The discharge and charge curves from the measurements and modeling were in good agreement. Based on the modeling, the distributions of the electrical potentials of the solid and solution phases, the porosity of the electrodes, and the current density within the electrodes as well as the acid concentration can be predicted as a function of charge and discharge time.

• Korean Chemical Engineering Research
• /
• v.48 no.2
• /
• pp.147-156
• /
• 2010

There are four key factors for gas-phase biofilters; biocatalysts(microorganisms), packing materials, design/operating techniques, and diagnosis/management techniques. Biofilter performance is significantly affected by microbial community structures as well as loading conditions. The microbial studies on biofilters are mostly performed on basis of culture-dependent methods. Recently, advanced methods have been proposed to characterize the microbial community structure in environmental samples. In this study, the physiological, biochemical and molecular methods for profiling microbial communities are reviewed, and their applicability to biofilters is discussed. Community-level physiological profile is based on the utilization capability of carbon substrate by heterotrophic community in environmental samples. Phospholipid fatty acid analysis method is based on the variability of fatty acids present in cell membranes of different microorganisms. Molecular methods using DNA directly extracted from environmental samples can be divided into "partial community DNA analysis" and "whole community DNA analysis" approaches. The former approaches consist in the analysis of PCR-amplified sequence, the genes of ribosomal operon are the most commonly used sequences. These methods include PCR fragment cloning and genetic fingerprinting such as denaturing gradient gel electrophoresis, terminal-restriction fragment length polymorphism, ribosomal intergenic spacer analysis, and random amplified polymorphic DNA. The whole community DNA analysis methods are total genomic cross-DNA hybridization, thermal denaturation and reassociation of whole extracted DNA and extracted whole DNA fractionation using density gradient.

• Journal of Korean Society of Forest Science
• /
• v.99 no.4
• /
• pp.546-552
• /
• 2010

The aim of the study was to assess the cosmeceutical activity of Pyrus ussuriensis leaves and it is possible that can be used as a cosmetic ingredient for application of cosmetic industries. P. ussurensis leaf was extracted with various solvents including water, 70% ethanol and 60% acetone. In the result of DPPH (1,1-diphenyl-2-picryl-hydrazyl) scavenging radical activity, water, ethanol and acetone extract of P. ussuriensis leaf were higher than 70%, 80% and 85% at 50 ppm concentration, respectively. Xanthine oxidase inhibition activity and superoxide dismutase (SOD)-like activity by P. ussuriensis extract were higher than 30%. In addition, SODlike activity of all extracts showed tendency of the significant increase with the increase of concentration. In the anti-inflammatory test, P. ussuriensis leaf extract inhibited generation of nitric oxide (NO) stimulated by LPS in the macrophage cell line (raw 264.7) after 12 to 24 hours. As above results, P. ussuriensis has a great potential as a cosmeceutical raw material as well as anti-oxidant and anti-inflammatory ability.

• Journal of Korean Society of Forest Science
• /
• v.99 no.4
• /
• pp.470-478
• /
• 2010

UV-protection skin whitening and immune activities several parts of Acer mono and Acer okamotoanum were investigated. The bark of both Acer mono and Acer okamotoanum had higher yields than other parts as 2.67% and 2.45%. The cytotoxicity of the extracts were lower than 21.64% against human skin cell(CCD-986sk) line in adding 1.0 mg/mL of the highest concentration. The bark extracts of Acer mono greatly reduced the expression of MMP-1 on UV-irradiated CCD-986sk cells down to as 30%. At 1.0 mg/mL of bark extration of Acer mono, $PGE_2$ expression was also significantly decreased. Generally, the bark extracts of Acer mono and Acer okamotoanum had higher activity than other parts, but, interestingly, wood extract of Acer okamotoanum showed strong inhibition effect on melanin production by Clone-M3 cells as 79.25%. From these results, we could conclude that the bark extract from Acer mono and Acer okamotoanum had skin-whitening activity as well immune enhancement activity.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.3
• /
• pp.57-61
• /
• 2016

In order to protect the solar cells from the moisture and oxygen, we evaluated the electrical and optical properties for the $Cu(In,Ga)Se_2$ (CIGS) solar cells which were prepared by the spray coating method. Generally, the EVA (ethylene-vinyl acetate) films are laminated to protect the CIGS flexible solar cells, which results in a high cost process due to complicated devices. In this study, we tried to prepare the protection layers of the flexible CIGS flexible solar cells by using spray coating method instead of conventional laminating films in order to reduce the device weight as well as the process time. The CIGS solar cells with spray coating method showed an enhanced efficiency than the before treated sample (2.77% to 2.93%) and relatively proper water vapor transmission rate of the solar cells about 62.891 gm/[$m^2-day$].

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.3
• /
• pp.516-520
• /
• 2002

This study was designed to investigate the hepatoprotective effects of Semisulcospira libertina and garlic on the acute hepatotoxicity induced by carbon tetrachloride (CCl$_4$) of rats. Male Sprague-Dawley rats weighing 200∼220g were pretreated with dehydrated powder of Semisulcospira libertina (2.1 g/kg, po; SL) and dehydrated powder mixture of Semisulcospira libertina and garlic (3g/kg, 7:3 ratio, po; SG) once daily for 3 consecutive days, and then given a single dose of CCl$_4$(1g/kg in 5ml/kg corn oil, po) and liver function was determined 24 hrs later. Liver damage was assessed by quantitating activities of serum alanine aminotransferase (ALT), aspartate aminotransferase (AST), sorbitol dehydrogenase (SDH) and alkaline phosphatase (ALP) as well as by histopathological examination. Pretreatments with SL and SG significantly decleased CCl$_4$-elevated ALT (48% and 61% respectively), AST (32% and 47%) and SDH (51% and 76%), but had no effect on ALP. SL and SG had revealed hepatoprotective effects against CCl$_4$-induced histopathological changes such as severe necrosis, inflammatory cell infiltration and congestion in the central gene of hepatic lobule. These findings demonstrate that SL and SG may haute the hepatoprotective effect on CCl$_4$-induced liver damage.