• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.1
• /
• pp.49-55
• /
• 2009

This paper presents the optimal shape of microelectrode that generates dielectrophoretic(DEP) force to separate particles in homogeneous medium. The principle of the particles sorting is based on the use of the relative strengths of negative DEP (nDEP) and drag forces, as in a general DEP-activated cell sorter (DACS). To numerically calculate the DEP force and drag force, the simulation is implemented in MATLAB 7.0. The properties of particles, which are used in simulation, are similarly selected as those of cells to apply cell separation. The most optimized shape of electrode is selected by numerical simulation according to a variety of electrode shape such as rectangle, trapezoidal, and right-triangle. Through, in addition, parameter study, we found that applied frequency is more significant factor on the separation than various parameters, such as applied voltage and permittivity of medium, that decide on the strength of DEP force.

• Korean Journal of Plant Taxonomy
• /
• v.32 no.3
• /
• pp.301-338
• /
• 2002

Morphological characters of sections Rhomboidales (four taxa) and Digitatae (seven taxa) of the subgen. Eucarex (genus Carex, Cyperaceae) were reexamined. The epidermal patterns of perigynium, achene and leaf were investigated by SEM and LM. Morphological characters such as length and width of stem, leaf, bract, spike, scale, perigynium and achene, and shape of cross-sectioned stem, spike, scale, apex of scale, perigynium, beak and base of perigynium, achene, hair present or absent in perigynium, number of involucre and epidermal pattern of perigynium, achene and leaf(shape of fundamental epidermal cell and cell wall, type of silica body, shape of beak epidermal cell and cell wall in perigynium, subsidiary cell shape, size and frequency of stomatal complex of leaf) were useful for the identification of the observed 11 taxa. According to the current study, examined 11 taxa of sections Rhomboidales and Digitatae were distinct from each other regarding by length of leaf, stem, pistillate scale and perigynium, shape and epidermal cell of perigynium beak. C. lanceolata and C. humilis have been confused due to similar morphological characters. C. lanceolata and C. humilis were distinct, however with respect to from length of stem, leaf ligule present or absent, shape of cross-sectioned stem, epidermal patterns of perigynium, achene and leaf. And C. lanceolata could be distinguished from C. pediformis by shape of perigynium and achene, shape of cross-sectioned of stem, epidermal pattern of perigynium, achene and leaf.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.97-100
• /
• 2007

Fuel Cell Stack performance, which is influenced by the maintenance of a constant internal environment, requires high levels of air tightness. Used for analysis, gasket for fuel cell is made of elastic rubber materials and placed over separator, and shape of deformation of a gasket affects the transformation separator and airtightness while fastening structure. Separator as made of steel sheet isn't broken under pressure but can affect gas and cool water flow by the plastic deformation process. Therefore， it is understood that assembly process is well developed in case distribution of stress and shape of deformation is shown uniformly. This study is conducted on the assumption that a fuel cell maintenance is advantageous in that conditions. In this paper, analyses of unit cell and partial model were performed and distribution of stress and shape of deformation of Gasket and separator were analyzed to evaluate the airtightness while fastening structure.

• Transactions of Materials Processing
• /
• v.18 no.7
• /
• pp.531-537
• /
• 2009

The effect of blank holding force on thickness variation in simultaneous sheet forming with rectangular shape and circular has been demonstrated. Because has investigated an effect on formability of magnesium sheet, in this paper, the effect of punch radius on formability have been thinning, various crack phenomena and forming velocity. By simultaneously forming process with circular and rectangular shape, the data of simultaneously forming process with circular and rectangular shape will used to a part development such as notebook computer case, cell phone and bipolar plate of fuel cell.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.3 no.3
• /
• pp.8-13
• /
• 2010

Shape form focus (SFF) is a technique that reconstructs 3D shape of an object using image focus. Although many SFF methods have been proposed, there are still notable inaccuracy effects due to noise and non-optimization of image characteristics. In this paper, we propose a noise filter technique for noise reduction and genetic algorithm (GA) for focus measure optimization. The proposed method is analyzed with a statistical criteria such as Root Mean Square Error (RMSE) and correlation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3B
• /
• pp.153-160
• /
• 2007

Placing antennas of low power base stations below surrounding buildings, as in urban microcells, makes propagation characteristics strongly dependent on the building environment. As a result, propagation in these urban microcells is non-isotropic, so that the assumption of circular cells used in planning of conventional cellular sys toms is no longer valid. Assuming circular cells leads to a more conservative system design, implying more base stations. This work investigates the effect of cell shape, due to non-isotropic propagation, on the out-of-cell interference and Erlang capacity of CDMA system. Propagation is described by measurement derived models for low antennas in a rectangular urban street grid. The analysis is done for soft handoff protocols.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5A
• /
• pp.517-525
• /
• 2008

In this paper, we cary out system level simulations to investigate the effect of cell shape(i.e., different base station displacements in the two directions defined by the street grid) on minimizing transmitter power, interference power, and blocking probability for CDMA system in urban microcellular environments. In urban microcell, path loss to the base station depends on the orientation of the street where the mobile is located. Interference from mobile stations to the base station in the reference cell is considered up to second tier. The wrap around method is used to include the second tier interference with realistic computational complexity without reducing the accuracy of interference calculations. The investigation shows that the transmitter power, interference power, and blocking probability in a cell can be reduced by proper selection of the efficient cell shape.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.59-62
• /
• 2006

Formability is requested to successfully develop of a metal bipolar plate for mass production. From this point of view, wider channel and land width is more helpful to improve formability. But the performance of the fuel cell can be affected by its channel and land shape. So it is very important to select proper channel and land shape not to deteriorate the fuel cell performance. In this work, 3-dimensional, non-isothermal numerical simulation was performed to analyse the effects of channel and land width on the fuel cell performance. 3 types of straight channel were selected for the numerical simulation. The simulation results reveal that wide channel and land width lower fuel cell performance and decrease voltage at a high current density region. Water activity, temperature, oxygen concentration distributions were investigated to find the reasons of performance degradation. The results show that wide channel and land width give an bad effect on fuel cell performance because of low cool ins efficiency and lack of oxygen gas under the land.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.2
• /
• pp.90-97
• /
• 1988

The rate of utilization of the oak cork (bark of Quercus variabilis Blume) ranges only 40-50%. Therefore, this study was carried out to investigate the chemical properties of the oak cork for increasing the utility. 1) The contents of alkali extractives, organic solvent extractives and ash in the oak cork are similar to those of other barks, but hot and cold water extractives and lignin contents are lower than those of the wood. The carbohydrate (cellulose and hemicellulose) content of the oak cork is similar to that of other barks. The suberin contents in the first and the second bark of the oak cork are 34.8 and 32.2% respectively, in the dry weight. 2) Inorganic component contents of the first bark are similar to those of the second. The pH of the first and the second bark are 3.9 and 4.2%. The caloric values of the first and second bark are 6,263 Kcal/kg, and 5,828 Kcal/kg, respectively, and these caloric values are higher than those of other barks. The sclerencymatous cell content of the first bark which is related to the quality of the oak cork is lower than that of second bark, the contents of the sclerenchymatous cell and lignin show the positive correlation. 3) In the dimension of the cross sectioned cork cell, the first bark is bigger than that of the second. The shape of the cork cell is globular shape in the early bark and discoid shape in the late bark. The cross and the radial section are the same shape, but the tangential section shows difference from the other section.

• Journal of Biomedical Engineering Research
• /
• v.12 no.2
• /
• pp.89-98
• /
• 1991

This study is concerned on the automation for cell diagnosis which has better objectivity and speed of test than human beings. Diagnosis is on the basis of shape change of abnormal Cells. Used parameters are nucleus area, nucleus perimeter, nucleus shape, cytoplasm area, nucleus/cytoplsm ratio, which was obtained using image processing technics. A new mode method is proposed on the automatic threshold selection for superior process time compared with Otsu's. Contour of the cytoplasm of abnormal cell is obtained using me- dian filter and sorel operator. The mask to get only original shape of abnormal cells is formed uslng the contour filling algorithm. In the result the normal cells are separated from the abnormal cells and the abnormal cells can be distinguished through screwing of abnormal cell's image with reference data to judge abnormal cells. Owing to this study the number of inspections which the pathologists should examine will be decreased and the time for inspection will be shortened.