• 한국수소및신에너지학회논문집
• /
• 제22권6호
• /
• pp.859-867
• /
• 2011

The cold start problem is one of major obstacles to overcome for the commercialization of fuel cell vehicles. However, the cold start characteristics of fuel cell systems are very complicated since various phenomena, i.e. ice-blocking, electro-chemical reactions, heat transfer, and defrosting of BOP components, are involved in them. This paper presents a framework to approach the problem at a full stack scale using Axiomatic Design (AD). It was characterized in terms of Functional Requirements (FRs) and Design Parameters (DPs) while their relations were established in a design matrix. Considering the design matrix, the endplates should have low thermal conductivity and capacity without increase in weight or decrease in structural stiffness. Consequently, composite sandwich endplates were proposed and examined both through finite element analyses and experiments simulating cold start conditions. From the examinations, it was found that the composite sandwich endplates significantly contributed to improving the cold start characteristics of PEMFC.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제33권2호
• /
• pp.96-102
• /
• 2016

Recently silk polymer produced by Bombyx mori silkworm has been considered as biological macromolecules. Silk polymer was extracted in PBS solution at $37^{\circ}C$ for 72 h or $72^{\circ}C$ for 24 h. The effect of EtOH treatment on the cocoon extraction was also examined. The extraction yield of cocoon was less than 1 wt% regardless of extraction conditions. UV spectroscopy showed that the experimental extracts have absorption bands at 280 nm. There is no cytotoxicity effect on the mouse fibroblast L929 cell. The phenotype of L929 cell was not changed under the experimental conditions. The proliferation behavior of L929 cell was not affected by the addition of cocoon extract. Therefore, cocoon extract might be cytocompatible and can be used as promising biomaterials.

• 대한기계학회논문집A
• /
• 제21권11호
• /
• pp.1871-1884
• /
• 1997

This paper describes the design process of a 3-component load cell with a multiple parallel plate structure which may be used to measure transverse forces and twisting moment simultaneously. Also we have derived equations to predict the bending strains on the surface of the beams in the multiple parallel plate structure under transverse force or twisting moment. It reveals that the bending strains calculated from the derived equations are in good agreement with the results from finite element analysis and experiment. Also we have evaluated the rated output and interference error of each component, which can be efficiently used to design a 3-component load cell with a multiple parallel plate structure.

• 대한기계학회논문집B
• /
• 제38권1호
• /
• pp.31-39
• /
• 2014

연료전지와 가스터빈의 하이브리드 시스템의 성능은 시스템 구성방법에 따라 영향을 많이 받는다. 본 연구에서는 용융탄산염연료전지(MCFC)와 가스터빈을 터빈간접가열방식으로 모사하여 성능을 예측하였다. 하이브리드 시스템의 설계파라미터의 변화에 따른 성능의 경향을 나타내었다. 그리고 MCFC 단독 운전시의 설계조건에 미치는 영향을 최소화하는 가장 합리적이고 실현가능한 하이브리드 시스템의 설계 조건을 구현하였다. 경제성 평가를 통해 MCFC단독 시스템 대비 하이브리드 시스템의 경제적 이점을 평가하였다.

• 한국통신학회논문지
• /
• 제34권11C호
• /
• pp.1113-1121
• /
• 2009

본 논문에서는 기지국간 간섭이 큰 다중기지국 환경에서 multiple-input multiple output (MIMO) orthogonal frequency division multiplexing (OFDM) 시스템을 위한 파일럿 시퀀스 설계 방법 및 채널 추정 기법을 제안한다. 제안 파일럿 시퀀스의 경우 평균 제곱 오류치 (Mean Square Error)를 최소화시키며, 설계된 파일럿에 적합한 채널 추정 방법을 제안한다. 제안된 파일럿 시퀀스 및 채널 추정 기법은 추 시퀀스의 상관관계 특성을 이용해 설계되며 모의실험을 통해 설계된 파일럿 시퀀스를 이용한 채널 추정 기법이 기지국간 간섭을 완화에 효과적임을 보여준다.

• Transactions on Electrical and Electronic Materials
• /
• 제5권2호
• /
• pp.41-49
• /
• 2004

Layer transfer process has emerged as a promising tool in the field of thin silicon solar cell technology. This process can use mono-crystalline silicon as a surface for the epitaxial growth of a thin layer of silicon. It requires some sort of surface conditioning of the substrate due to which the surface become suitable for homo-epitaxy and lift off after solar cell fabrication. The successful reuse of substrate has been reported. The use of the conditioned surface without any kind of epitaxial layer growth is also the issue to be addressed. This review paper basically describes the five most cost effective methods on which works are in progress. Several types of possible problems envisaged by different research groups are also incorporated here with necessary discussion. Work in Korea has already started in this area in collaboration IC Design and Fabrication Centre, Jadavpur University, India and that also has been mentioned.

• 한국수소및신에너지학회논문집
• /
• 제27권5호
• /
• pp.503-509
• /
• 2016

Fuel cell is a device for producing electricity by using the hydrogen produced by the fuel processor. At this time, CO is also created by the fuel processor. The resulting CO enters the stack where is produce electricity and leads to the adsorption of anode catalyst, finally the CO poisoning occurs. Stack which occurred CO poisoning has a reduction in performance and shelf life are gradually fall because they do not respond to hydrogen. In this paper, experiments that using a PROX reactor to prevent CO poisoning were carried out for removing the CO concentration to less than 10ppm range available in the fuel cell. Furthermore experiments by the PROX reaction was designed and manufactured with a water-cooling heat exchange reactor to maintain a suitable temperature control due to the strong exothermic reaction.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2006년도 추계학술발표회 초록집
• /
• pp.4-5
• /
• 2006

This paper represents modeling and optimization techniques for solar cell process on single-crystalline float zone (FZ) wafers with high efficiency; There were the four significant processes : i)emitter formation by diffusion, anti-reflection-coating (ARC) with silicon nitride using plasma-enhanced chemical vapor deposition (PECVD); iii)screen-printing for front and back metallization; and iv)contact formation by firing. In order to increase the performance of solar cells, the contact formation process is modeled and optimized. This paper utilizes the design of experiments (DOE) in contact formation to reduce process time, fabrication costs. The experiments were designed by using central composite design which is composed of $2^4$ factorial design augmented by 8 axial points with three center points. After contact formation process, the efficiency of the solar cell is modeled using neural networks. This model is used to analyse the characteristics of the process, and to optimize the process condition using genetic algorithms (GA). Finally, find optimal recipe for solar cell efficiency.

• 반도체디스플레이기술학회지
• /
• 제16권3호
• /
• pp.47-52
• /
• 2017

Solar cell industry requires high technologies to stabilize apparatuses for the wafer manufacturing. Vibrations of squaring & grinding machines are one of the most critical factors for causing residual stresses of ingots, which are the main reasons of the breakage in the following processes such as wire sawing, cleaning, and modularity. In this study, the structure of a squaring & grinding machine has been analyzed through experiments and computer simulations to figure out the ways to suppress the vibrations effectively, and further to minimize the breakage of wafers. The result shows that simple design changes of applying a few ribs can improve the stability of the machine.

• 방사성폐기물학회지
• /
• 제20권2호
• /
• pp.209-229
• /
• 2022

This work provided a review of three techniques-(1) spectrochemical, (2) electrochemical, and (3) spectroelectrochemical-for molten salt medias. A spectroelectrochemical system was designed by utilizing this information. Here, we designed a spectroelectrochemical cell (SEC) and calibrated temperature controllers, and performed initial tests to explore the system's capability limit. There were several issues and a redesign of the cell was accomplished. The modification of the design allowed us to assemble, align the system with the light sources, and successfully transferred the setup inside a controlled environment. A preliminary run was executed to obtain transmission and absorption background of NaCl-CaCl₂ salt at 600℃. It shows that the quartz cuvette has high transmittance effects across all wavelengths and there were lower transmittance effects at the lower wavelength in the molten salt media. Despite a successful initial run, the quartz vessel was mated to the inner cavity of the SEC body. Moreover, there was shearing in the patch cord which resulted in damage to the fiber optic cable, deterioration of the SEC, corrosion in the connection of the cell body, and fiber optic damage. The next generation of the SEC should attach a high temperature fiber optic patch cords without introducing internal mechanical stress to the patch cord body. In addition, MACOR should be used as the cell body materials to prevent corrosion of the surface and avoid the mating issue and a use of an adapter from a manufacturer that combines the free beam to a fiber optic cable should be incorporated in the future design.