• Journal of Information Display
• /
• 제7권1호
• /
• pp.19-24
• /
• 2006

We propose optical configurations of a double-cellgap liquid crystal cell for transflective displays with wide viewing angle and high contrast ratio. The reflective part is designed in the wide-band quarter wave structure to achieve good dark state. For the transmissive part, the compensation method is applied to achieve the super-achromatic dark state, and three switching methods are used : which are vertical switching, horizontal switching to $30^{\circ}$and horizontal switching to $120^{\circ}$, to achieve the bright state.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제6권5호
• /
• pp.311-325
• /
• 2001

Tissue engineering scaffolds play a critical role in regulating the reconstructed human tissue development. Various types of scaffolds have been developed in recent years, including fibrous matrix and foam-like scaffolds. The design of scaffold materials has been investigated extensively. However, the design of physical structure of the scaffold, especially fibrous matrices, has not received much attention. This paper compares the different characteristics of fibrous and foam-like scaffolds, and reviews regulatory roles of important scaffold properties, including surface geometry, scaffold configuration, pore structure, mechanical property and bioactivity. Tissue regeneration, cell organization, proliferation and differentiation under different microstructures were evaluated. The importance of proper scaffold selection and design is further discussed with the examples of bone tissue engineering and stem cell tissue engineering. This review addresses the importance of scaffold microstructure and provides insights in designing appropriate scaffold structure for different applications of tissue engineering.

• 대한기계학회논문집B
• /
• 제26권11호
• /
• pp.1605-1612
• /
• 2002

Thermodynamic performance analysis has been carried out for a hybrid electric power generation system combining a gas turbine and a solid oxide fuel cell and operating at over-atmospheric pressure. Performance characteristics with respect to main design parameters such as maximum temperature and pressure ratio are examined in detail. Effects of other important design parameters are investigated including fuel cell internal parameters such as fuel utilization factor, steam/carbon ratio and current density, and system parameters such as recuperator efficiency and compressor inlet temperature.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.14-18
• /
• 2003

Feul-cell system consists of fuel reformer, stack and energy translator. Among these parts, slack is a core part which produces electricity directly. In order to set a stack module, fabrication of appropriate stack, design of water flow path in stack, and control of coolant are needed. Especially, water or air is used as a coolant to dissipate heat. The different temperature of each electric cells after cooling and the high temperature of the stack affect the performance of the stack, Therefore, it is necessary that the relationship between coolant, healing rate, width of slack, properties of stack, and the shape of water flow path must be understood. For the optimal design, the computational simulation by CFD-ACE has been conducted and the resulting database has been constructed.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.165-168
• /
• 2007

The objective of this study is to demonstrate and commercialized for on-board fuel storage system for the hydrogen fuel cell vehicles. Type3 composite cylinder is consisting of the full wrapped composites on a seamless aluminum liner. Especially, the seamless aluminum liner has been commercialized with development of fabrication through this study. The key technologies, including design, analysis and the optimized filament winding process for 350bar composite cylinder, were established and verified with design qualification test in accordance with international standard. And the facilities for fabrication and design qualification test have been constructed.

• Journal of Electrical Engineering and Technology
• /
• 제5권4호
• /
• pp.580-591
• /
• 2010

This paper deals with an observer design for a P-Cell Chopper. The goal is to reduce drastically the number of sensors in such system by using an observer in order to estimate all the capacitor voltages. Furthermore, considering an instantaneous model of a p-cell chopper, an interconnected observer is designed in order to estimate the capacitor voltages and some parameters of the model. This is realized by using only the load current measurement. Simulation results are given in order to illustrate the performance of such observer. To show the validity of our approach, experimental based a DSP results are presented.

• ETRI Journal
• /
• 제34권2호
• /
• pp.284-287
• /
• 2012

Quantum-dot cellular automata (QCA) is one of the few alternative computing platforms that has the potential to be a promising technology because of higher speed, smaller size, and lower power consumption in comparison with CMOS technology. This letter proposes an optimized full comparator for implementation in QCA. The proposed design is compared with previous works in terms of complexity, area, and delay. In comparison with the best previous full comparator, our design has 64% and 85% improvement in cell count and area, respectively. Also, it is implemented with only one clock cycle. The obtained results show that our full comparator is more efficient in terms of cell count, complexity, area, and delay compared to the previous designs. Therefore, this structure can be simply used in designing QCA-based circuits.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.972-974
• /
• 1993

This paper presents a new method to automatically design fuzzy logic controller(FLC). The main problems of designing FLC are how to optimally and automatically select the control rules and the parameters of membership function (MF). Cell state space algorithms (CSS), differential competitive learning (DCL) and multialyer neural network are combined in this paper to solve the problems. When the dynamical model of a control process is known. CSS can be used to generate a group of optimal input output pairs(X, Y) used by a controller. The(X, Y) then can be used to determine the FLC rules by DCL and to determine the optimal parameters of MF by DCL and to determine the optimal parameters of MF by multilayer neural network trained by BP algorithm.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.727-730
• /
• 2002

Most of battery industries are growing explosively as a core strategy industry for the development of the semi-conductor, the LCD, and the mobile communication device. Dynamic characteristic analysis consists of dynamic behavior analysis and finite element analysis and is necessary for effective design of machines. In the dynamic behavior analysis, the displacement, velocity, applied force and angular velocity of each components are simulated according to each part. In the FEA, stress analysis, mode analysis, and frequency analysis are performed far each part. The results of these simulations are used for the design specification investigation and compensation for optimal design of cell manufacturing line. Virtual Engineering of the separator inserting machine on the automatic cell assembly line systems are modeled and simulated. 3D motion behavior is visualized under real-operating condition on the computer window. Virtual Prototype make it possible to save time by identifying design problems early in development, cut cost by reducing making hardware prototype, and improve quality by quickly optimizing full-system performance. As the first step of CAE which integrates design, dynamic modeling using ADAMS and FEM analysis using NASTRAN are developed.

• 한국통신학회논문지
• /
• 제19권3호
• /
• pp.543-552
• /
• 1994

음성 인식에서의 dynamic time warp (DTW)은 반복적 계산을 필요로 하며, 이 계산을 수행하기에 합당한 PE cell의 설계는 매우 중요하다. 따라서 이 연구에서는 실시간 어휘 인식을 가능하게 하는 대사전 규모의 대어휘 고립단어인식용 DTW알고리즘을 하드웨어로 구현하기위한 PE(Processing Element)소자의 설계에 주안점을 두었다. 이 DTW용 PE 소자를 크게 세가지의 블록으로 대별된다. 즉, “MIN" block, "ADD" block 그리고 ”ABS" block인데, “MIN"은 축적 최소거리를 계산하기 위한 블록이고, ”ADD"는 이들 최소거리들의 합을 계산하는 블록, 그리고 “ABS"는 이러한 합에 의한 국부거리를 절대값을 구하기 위한 블록이다. 본 연구에서는 이들 세가지 전체 블록회로의 설계 및 검증을 행하였으며, 1.2 m CMOS N-well 설계 규칙에 EK라 전체블록에 대한 레이아웃을 행한 후 설계 규칙 검사(DRC)를 마쳤다.에 대한 레이아웃을 행한 후 설계 규칙 검사(DRC)를 마쳤다.