• Korean Chemical Engineering Research
• /
• v.49 no.6
• /
• pp.775-780
• /
• 2011

5-cell DMFC stack was fabricated and operated with the load of 4 A for 4000 hrs. After 4000 hrs operation peak power density of the stack reduced by 27.3%. Two of the five cells did now show performance degradation, the performance of other two was reduced by 40% and the performance of the other decreased by 60%. The amount of performance degradation of each cell by long-term operation did not correlate with the position in the stack. Platinum particle size in the anode catalyst layer of the MEA with the strongest degradation increased and the increase was severer on the position of methanol inlet than on the position of methanol outlet. However, platinum particle size in the cathode catalyst layers did not changed for all the MEA'. Ruthenium crossover from the anode catalyst layer to the cathode catalyst layer through the membrane was observed after 4,000 hrs operation by SEM-EDX and it occurred for all MEA' regardless of the degree of performance degradation. Atomic ratio of ruthenium to platinum in the cathode catalyst layer was the highest in the MEA with the strongest performance degradation.

• Biomolecules & Therapeutics
• /
• v.32 no.1
• /
• pp.65-76
• /
• 2024

Bortezomib (BTZ) is a proteasome inhibitor used to treat multiple myeloma (MM). However, the induction of peripheral neuropathy is one of the major concerns in using BTZ to treat MM. In the current study, we have explored the effects of BTZ (0.01-5 nM) on rat neural stem cells (NSCs). BTZ (5 nM) induced cell death; however, the percentage of neurons was increased in the presence of mitogens. BTZ reduced the B-cell lymphoma 2 (Bcl-2)/Bcl-2 associated X protein ratio in proliferating NSCs and differentiated cells. Inhibition of βIII-tubulin (TUBB3) degradation was observed, but not inhibition of glial fibrillary acidic protein degradation, and a potential PEST sequence was solely found in TUBB3. In the presence of growth factors, BTZ increased cAMP response element-binding protein (CREB) phosphorylation, brain-derived neurotrophic factor (Bdnf) transcription, BDNF expression, and Tubb3 transcription in NSCs. However, in the neuroblastoma cell line, SH-SY5Y, BTZ (1-20 nM) only increased cell death without increasing CREB phosphorylation, Bdnf transcription, or TUBB3 induction. These results suggest that although BTZ induces cell death, it activates neurogenic signals and induces neurogenesis in NSCs.

• Transactions of the Korean hydrogen and new energy society
• /
• v.20 no.4
• /
• pp.317-322
• /
• 2009

To investigate degradation mechanism of PEMFC operated with repetitive startup/shutdown cycling, i-V characteristics, impedance, cyclic voltamograms were measured. OCV decreased from 0.967 to 0.951 V while the cell voltage at 800mA/$cm^2$ from 0.657 to 0.563V, implying that the electrodes rather than membrane electrolyte was damaged during the cycling operation. Electrochemical analyses supported that the performance degradation could be mainly attributed to degradation of the electrodes such as a decrease in electrochemical active surface area rather than degradation of membrane.

• Proceedings of the Korean Biophysical Society Conference
• /
• 2003.06a
• /
• pp.34-34
• /
• 2003

Protein unfolding is a key step in several cellular processes, including protein translocation across some membranes and protein degradation by ATP-dependent proteases. C1pAP protease and the proteasome can actively unfold proteins in a process that hydrolyzes ATP, These proteases catalyze unfolding by processively unraveling their substrates from the attachment point of the degradation signal. As a consequence, the ability of a protein to be degraded depends on its structure as well as its stability. An ${\alpha}$-helix is easier to unravel than a ${\beta}$-strand. In multidomain proteins, independently stable domains are unfolded sequentially. The steric constraints imposed on substrate proteins during their degradation by the proteasome were investigated by constructing a model protein in which specific parts of the polypeptide chain were covalently connected through disulfide bridges. The cross-linked model proteins were fully degraded by the proteasome, but two or more cross-links retarded the degradation slightly. Our results suggest that the pore of the proteasome allows the concurrent passage of at least three stretches of a polypeptide chain, and also explain the limited degradation by the proteasome that occurs in the processing of the transcription factor NF-KB, and also implicate difficulty in degradation of amyloidal aggregates by the proteasome

• Journal of the Korean Solar Energy Society
• /
• v.30 no.6
• /
• pp.16-21
• /
• 2010

It is well-known that Boron-doped Cz Si solar cells suffer light-induced degradation due to boron-oxygen defect which is responsible of a reduction in lifetime and hence efficiency. In this paper, we assume that PV solar cell has been connected with variable load to account the real operating condition and it shows different light-induced degradation of Si solar cell. To evaluate the effect of light-induced degradation for solar cell with various load, Single crystalline solar cells are connected with open and short circuits during light exposure. Isc-Voc curve evaluate light induced degradation of solar cells and the reason is explained as a change for serial resistance. From the results, Electrical characteristics of solar cells show better performance under short circuit conditions, after light exposure.

• KSBB Journal
• /
• v.14 no.2
• /
• pp.136-140
• /
• 1999

Characteristics of organic acid degradation by isolated yeast strain was investigated. Optimum initial pH was 5. Increase in cell mass was proportional to the decrease in organic acid degradation. Also no accumulation of byproduct was observed during degradation. Acetic acid degraded fast, followed by butyric acid and propionic acid in order. No significant substrate inhibition was observed up to 12 g/L of acetic acid 7 g/L of propionic acid, respectively. However, inhibition of butyric acid was significant above 4 g/L. Cell mass yield was 0.2-0.4 g cell/g acids and decreased at high decreased at high organic acid concentration. 95% of organic acid (7.5 g/L), corresponding to 13,000 ppm, was degraded in 30-40 hours.

• Korean Chemical Engineering Research
• /
• v.47 no.4
• /
• pp.441-445
• /
• 2009

Effect of temperature on membrane degradation in PEMFCs was studied. After cell operation at different temperatures($60{\sim}90^{\circ}C$) under accelerating degradation conditions(OCV, anode dry, cathode RH 65%) for 144 h, cell performance decreased from 12 to 35%. The results of FER in effluent water showed that this decrease in cell performance was caused by membrane degradation by the attack of $H_2O_2$ or oxygen radicals(${\cdot}OH$, $HO_2{\cdot}$) and that resulted in increase in gas crossover for radical formation. Radical formation on the electrode was confirmed by ESR. Activation energy of 66.2 kJ/mol was obtained by Arrhenius plot used to analyze the effect of temperature on membrane degradation. Increase of cell temperature enhanced gas crossover rate, radical formation rate and membrane degradation rate.

• BMB Reports
• /
• v.33 no.6
• /
• pp.448-453
• /
• 2000

In yeast the key gluconeogenic enzyme, fructose-1,6-bisphosphatase (FBPase), is selectively targeted from the cytosol to the lysosome (vacuole) for degradation when glucose starved cells are replenished with glucose. The pathway for glucose induced FBPase degradation is unknown. To identify the receptor-mediated degradation pathway of FBPase, we investigated the presence of the FBPase receptor on the vacuolar membrane by cell fractionation experiments and binding assay using vid mutant (vacuolar import and degradation), which is defective in the glucose-induced degradation of FBPase. FBPase sedimented in the pellets from vid24-1 mutant after centrifugation at $15,000{\times}g$ for 15 min, suggesting that FBPase is associated with subcellular structures. Cell fractionation experiments revealed that FBPase is preferentially associated with the vacuole, but not with other organelles in vid24-1. FBPase enriched fractions that cofractionated with the vacuole were sensitive to proteinase K digestion, indicating that FBPase is peripherally associated with the vacuole. We developed an assay for the binding of FBPase to the vacuole. The assay revealed that FBPase bound to the vacuole with a Kd of $2.3{\times}10^6M$. The binding was saturable and specific. These results suggest that a receptor for FBPase degradation exists on the vacuolar membrane. It implies the existence of the receptor-mediated degradation pathway of FBPase by the lysosome.

• Anatomy and Cell Biology
• /
• v.57 no.2
• /
• pp.155-162
• /
• 2024

Cerebral ischemia is the important cause of worldwide disability and mortality, that is one of the obstruction of blood vessels supplying to the brain. In early stage, glutamate excitotoxicity and high level of intracellular calcium (Ca²⁺) are the major processes which can promote many downstream signaling involving in neuronal death and brain tissue damaging. Moreover, autophagy, the reusing of damaged cell organelles, is affected in early ischemia. Under ischemic conditions, autophagy plays an important role to maintain energy of the brain and its function. In the other hand, over intracellular Ca²⁺ accumulation triggers excessive autophagic process and lysosomal degradation leading to autophagic process impairment which finally induce neuronal death. This article reviews the association between intracellular Ca²⁺ and autophagic process in acute stage of ischemic stroke.

• New & Renewable Energy
• /
• v.3 no.1 s.9
• /
• pp.60-67
• /
• 2007

Catalyst coated membrane [CCM] type and catalyst coated substrate [CCS] type of membrane electrode assembly [MEA] were manufactured and evaluated their performance. Degradation test were conducted to find the difference of long term stability in two types of MEA and the factor for performance degradation problem occurred. Performance degradation test of single cell in two different types of MEA were carried out when current density was $200mA/cm^{2}$. The degradation test had proceeded for 230 hours and performance degradation was checked by I-V curve and impedance measurement at regular intervals. Also, MEA before/after operation and changes of catalyst layer were characterized by SEM, TEM, and XRD. Maximum power density of CCM type was higher than that of CCS type. Meanwhile, an increase of particle size of catalyst and an increase of impedance resistance after long term operation were observed. In the case of using CCM type MEA, the performance was deteriorated 38% of initial performance. In the case of using CCS type MEA, the performance was deteriorated 43% of initial performance. In consideration of difference of initial performance, performance of CCM type is higher than that of CCS type but both types had similar problems during degradation test.