• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2601-2603
• /
• 1999

This paper describes on the development of Controller for the Utility Car combined photovoltaic. The Utility Car is generally composed of Controller, separately excited DC motor. battery and potbox. According to using battery, Utility Car have the problem of small operation time. So operating time is expanded by using parallel operating sollar cell and battery.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.5
• /
• pp.861-865
• /
• 1994

By using Neural Networks, a 8$\times$8 Banyan network controller is designed and implemented. In order to solve internal blocking and output blocking, Winner-Take-All method is used. The longer queue takes higher priority. First-in-first-out method is used among the non-blocking cells in the queue selected.The required time to select a cell is 2.7 $\mu$sec for 155Mbps. The implemented controller using Xilinx FPGA chip selects cells within 2.5$\mu$sec.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.701-704
• /
• 2005

PID controllers, which have been widely used in industry, have a simple structure and robustness to modeling error. But They are difficult to have uniformly good control performance in system parameters variation or different velocity command. In this paper, we propose a nonlinear adaptive PID controller based on a cell-mediated immune response and a gradient descent learning. This algorithm has a simple structure and robustness to system parameters variation. To verify performances of the proposed nonlinear adaptive PID controller, the speed control of nonlinear DC motor is performed. The simulation results show that the proposed control systems are effective in tracking a command velocity under system parameters variation.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.482-485
• /
• 1991

This paper discusses a maximum power point tracking controller (MPPTC) by using chopper with an adjustable input to output voltage. The MPPTC is determined by sensing only the actual voltage from solar cell array. It is simple and continuously tracks the solar cell array maximum power point regardless of the load type. Also, the system obtains protection circuit to protect overcharge and disovercharge against the battery.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1306-1307
• /
• 2011

Recently, the small scale photovoltaic (PV) electronic devices are drawing attention as the upcoming PV generation system. The PV system is commonly used in small scale PV applications such as LED lighting and cell phone. This paper proposes photovoltaic output sensorless (POS) maximum power point tracking (MPPT) control for a small scale charging system of PV-nickel metal hydride battery using field-programmable gate array (FPGA) controller. A converter is connected to a small scale PV cell and battery, and performs the POS MPPT at the battery terminal current instead of being at the PV cell output voltage and current. The FPGA controller and converter operate based on POS MPPT method. The experimental results show that the nickel metal hydride battery is charged by the maximum PV output power.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.4
• /
• pp.174-181
• /
• 2002

In this Paper, we proposed the method for the TIT (Theoretical Inter-arrival Time) was suggested in which it saves the cells by using the data buffer in the system rather than by using one separately from the internal controller, and it also releases these cells saved. The method of TIT complements the defect of the accumulation of the delay in the method of RDT which considers the time of the cell that is discharged from the established cell interval controller. And, in order to apply the merit of RDT, the method of TIT sets its standards on the cells arrival time as it was in the method of RAT.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.554-557
• /
• 1999

This paper represent about design of the controller for battery of Guide-Eye Sign Lamp with traffic auxiliary system for power supply using solar cell. Simulation is represents V-I and power characteristic by Mathematical & Design Center 6.3 & Qnet 2.1. This system is successfully operating with high clearness lights.

• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.2
• /
• pp.207-213
• /
• 2004

This paper describes the development of Behind-Tape-Reader (BTR) type DNC system using CYBER 180-830 as a central computer and IBM PC-AT cell control computer and NC lathe with FANUC 5T NC controller. In this system, the connection between central computer and cell control computer is done via RS-232C serial interface board, and that between cell control computer and FANUC 5T controller is done via parallel interface board. The software consists of two module, central computer communication module for NC program downloading and status uploading, NC machine running module for NC operating.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.1
• /
• pp.80-84
• /
• 2012

Recently, the small scale photovoltaic (PV) electronic devices are drawing attention as the upcoming PV generation system. The PV system is commonly used in small scale PV applications such as LED lighting and cell phone. This paper proposes photovoltaic output sensorless (POS) maximum power point tracking (MPPT) control for a small scale charging system of PV-nickel metal hydride battery using field-programmable gate array (FPGA) controller. A converter is connected to a small scale PV cell and battery, and performs the POS MPPT at the battery terminal current instead of being at the PV cell output voltage and current. The FPGA controller and converter operate based on POS MPPT method. The experimental results show that the nickel metal hydride battery is charged by the maximum PV output power.

• Proceedings of the KIPE Conference
• /
• 2010.11a
• /
• pp.261-262
• /
• 2010

This paper presents the design, development and performance of a power conditioning system (PCS) for application to a Molten Carbonate Fuel Cell (MCFC) for high power generation system. The controller must also supervise the total PCS operation while communicating with the fuel cell system controller. A control method for parallel operation of 250kW PCS was implemented and verified respectively. Experimental performances are compared to minimum target requirements of the PCS for MCFC respectively.