• 한국산업보건학회지
• /
• 제31권3호
• /
• pp.255-265
• /
• 2021

Objectives: The purpose of this study is to analyze the exposure characteristics of inorganic acids. Methods: We analyzed exposure data (n = 363,146) for six inorganic acids (hydrogen fluoride, hydrogen bromide, hydrogen chloride, phosphoric acid, nitric acid, and sulfuric acid) collected between 2017 and 2019 in South Korea. Measurement characteristics and exposure levels (ELs) were analyzed by inorganic acid, industry category, enterprise size, and measurement year. Results: Measurement percentage dominated in time-weighted average (TWA, 91%) compared to short term exposure limit (STEL) and Ceiling. Most of the measurements (79.7%) were collected from the manufacturing category of industry. Medians of ELs were mostly low (≤3% of the threshold limit), with the exception of sulfuric acid (4.6% of TWA and 10.5% of STEL). The percentages of exceeding 1% of the occupational exposure limits (OELs) in TWA were relatively high for sulfuric acid (35.8%) and hydrogen chloride (16.5%) compared to the other acids (4.2%-6.6%). In addition, the percentages of exceeding 1% of OELs in STEL or Ceiling were higher for sulfuric acid (22.9%), hydrogen chloride (12.3%), and nitric acid (8.2%) compared to the other acids (1.2%-1.9%). The small-sized enterprises showed higher ELs in TWA; contrarily, the large-sized enterprises had higher ELs in STEL or Ceiling. Conclusions: The measurement characteristics and ELs identified in this study could be useful for establishing safety and health policies for inorganic acids.

• 한국산업보건학회지
• /
• 제22권1호
• /
• pp.42-51
• /
• 2012

Objectives: To compare the exposure level of extremely low frequency (ELF) magnetic fields among semiconductor workers, shipyard welders and office workers. Methods: To measure the ELF magnetic field concentration, EMDEX LITE (Enertech, USA) were used and monitored for eight hours continuously. Five companies handling the electric and magnetic field (EMF) source were investigated, which the exposure groups were classified into three groups: semiconductor workers, welders, and office workers. Welder group was chosen as a high exposed group and office group as a low exposed group. Results: The arithmetic mean (${\pm}SD$) and geometric mean (GSD) of personal exposure level of semiconductor workers were 0.73 (${\pm}1.33$) ${\mu}T$, 0.43 (2.88) ${\mu}T$, respectively. The ceiling value ranged between 0.18 and 123.2 ${\mu}T$. Welders were exposed high with the arithmetic mean value of 3.46 (${\pm}\;13.46$) ${\mu}T$ and geometric mean value of 0.45 (4.70) ${\mu}T$, respectively, and ceiling value range of 75.5~129.6 ${\mu}T$. The exposure levels of office workers were low compared to other exposed groups; the arithmetic mean 0.05 (${\pm}0.13$) ${\mu}T$, geometric mean 0.03 (2.38) ${\mu}T$ and ceiling value range 0.37~3.35 ${\mu}T$. This study revealed statistically significant differences of the mean ELF magnetic field exposure doses among three groups (p < 0.01). Conclusions: The average ELF magnetic field exposure doses of semiconductor workers were much higher than those of office workers in control group, but were lower than those of welders in high exposure group.

• KIEAE Journal
• /
• 제4권4호
• /
• pp.45-52
• /
• 2004

Simulation of daylighting by computer program is a method to avoid unnecessary efforts in manufacture of its testing models, to reduce its measuring tolerances and be able to provide variations of various weather conditions as well. Many simulation programs on daylighting have been released freely or commercialized for selling, however, a demonstration of their availability and validity as a tool for evaluating daylighting performance is required since each one has its own characteristics. The objectives of this study lie in suggesting an application method of evaluation tools and demonstration of limits and characteristics so as to more easily determine the daylightingperformance in the very initial stages of planning for an arbitrary office space in which windows with daylight access are built. We produced scale model of the general light inducing type side lighting with lightshelfand ceiling, and the luminance (at 78 measuring points) and illuminance (at 84 measuring points) were measured in a clear sky. And a comparison of the measured values and the calculated values from a computer simulation using the Lightscape program was performed.

• 설비공학논문집
• /
• 제26권4호
• /
• pp.181-192
• /
• 2014

Light-shelf is one of the most efficient natural lighting systems due to the improved function of the inflow level of the outdoor natural light. However, the existing research on the light shelf limits to the rectangular parallelepiped space, so do not provide sufficient data for various shapes of spaces. Thus, this study aims at deriving proper plan and relationship of the light shelf through its performance assessment depending on the indoor space shapes and utilizing them as basic data of light shelf design. The conclusions are as follows : 1) for 6m space depth, standard intensity of illumination satisfaction depth has shown 8.3%~26.3% improvement through the adjustment of the angle and width when installing light shelf compared to no light shelf installation; 2) $-30^{\circ}$, $-20^{\circ}$ and $-10^{\circ}$ light shelves set by this study play only as a blind regardless of the shape of ceiling on the summer solstice, and it is unsuitable; and 3) this study has derived proper plan of light shelf upon space shapes based on energy reduction and indoor evenness. The study results provide expanded data of the performance assessment of the light shelves according to the different space shapes and light shelf factors, which serves as a basis of the light shelves designing.

• KIEAE Journal
• /
• 제4권2호
• /
• pp.65-72
• /
• 2004

Ecological architecture enables people to recycle and reuse architectural resources within the category of ecosystem and also to minimize the effect on environment in a whole process, including architectural planning, usage and exhaustion to use sustainable energies. Rammed earth wall construction method utilized in EcoCenter located in Crystalwaters ecological village in Austrailia is a good example, which maximizes its advantages and also covers its limits to use soil and wood as structural resources. In a case of wood, they used non-treated timber to minimize environmental load and utilized used materials in openings. In the roofs, aluminum coated steel which is plated with zinc collects rain effectively even though it is not regenerable. Nontoxic finishes and insulation in floor and ceiling with used papers are able to minimize its environmental load. Solar energy system applied in EcoCenter enables them to market extra energy with electricity companies as well as support needs of its own buildings to utilize photovoltaic panel system with PV panels. Passive solar system is planned effectively in heating and cooling to apply regenerative walls in a use of rammed earth wall construction and natural ventilation systems through openings.

• 한국산업보건학회지
• /
• 제20권1호
• /
• pp.63-69
• /
• 2010

This study was conducted to compare the concentration of various air contaminants in nine different laboratories during routine activities. Volatile organic compounds (VOC) were sampled and analyzed using NIOSH Method 1500 and asbestos fibers were sampled and analyzed using NIOSH Method 9002 and 7400. Detectable levels of acetone, toluene and ethanol were found in all the laboratories and xylene and n-hexane were detected in eight of the nine laboratories. All the VOC concentrations were well below the Korean Ministry of Labor's Exposure Limit and American Conference of Governmental Industrial Hygienists' (ACGIH) Threshold Limit Values (TLVs). Total VOC concentrations at the university laboratories were significantly higher than those at governmental agency laboratories. Airborne fiber concentrations were below 0.01 fibers/cc, while the concentration of chrysotile was 2% in insulation materials sprayed on the ceiling of one laboratory. While all the governmental agency laboratories (n=4) had fume hoods, two out of the five university laboratories did not have fume hoods. The capture velocity of half of the fume hoods were below the maintenance standard(0.4 m/sec). In conclusion, the study suggests that the current controls in place at both university and government agency laboratories are not sufficient in limiting exposure to harmful chemicals to non-detectable levels, though they appear to be adequate in protecting workers to levels below applicable occupational exposure limits. The study also suggests that researchers working in university laboratories may be exposed to greater levels of contaminant than those working in government agency laboratories.

• 한국콘텐츠학회논문지
• /
• 제10권2호
• /
• pp.43-53
• /
• 2010

유비쿼터스 컴퓨팅 기술들의 발달로 인해 인터랙티브 디스플레이는 사용자에게 다양한 인터랙션을 제공하고 있다. 이러한 인터랙션을 위해 다양한 방법들이 연구되었지만 디바이스 사용성과 단일 사용자에게 제공된다는 한계점이 발생하였다. 따라서 본 논문에서는 앰비언트 디스플레이 환경에서 다수 사용자에게 다양한 인터랙션을 제공하기위한 공간 멀티 인터랙션 인터페이스를 제안한다. 이를 위해 적외선 LED 배열바(IR-LEDs Array Bar)를 통해 사용자가 인터랙션 할 수 있도록 인터랙션 막을 생성한다. 이때 사용자는 인터랙션 막에서 공간 터치를 통해 다양한 인터랙션을 경험할 수 있다. 따라서 휴대 디바이스 없이도 사용자의 자연스러운 손동작만으로 인터랙션을 할 수 있는 인터랙티브 디스플레이 시스템과 인터페이스 방법을 제공한다.

• 한국광물학회지
• /
• 제24권2호
• /
• pp.119-131
• /
• 2011

대표적인 일부 건축자재의 석면 함량을 일본공업표준법 (JIS)에 따른 X-선회절분석으로 측정하였고, 분석과정에서의 광물학적 성분변화와 문제점을 검토하였다. 국내의 슬레이트, 벽재, 천장재의 대표적인 건축자재에 대해 석면 함량을 정량한 결과, 슬레이트 시료가 6.87~6.93%의 온석면을 함유하여 가장 많은 석면을 함유하고 있는 것으로 분석되었다. 분석된 다른 건축자재들에서도 1.35~3.98%의 범위로 다양한 양의 온석면이 포함되어 있는 것으로 분석되었다. 이번 연구에서 국내에서 처음으로 일부 건축자재의 석면 함량에 대한 X-선회절방법에 의한 분석결과를 제시하였으며, 이런 방법을 통하여 국내에서 최근에 개정된 규정(노동부 산업안전보건법 제2007-26호)에서 규정한 석면의 허용기준량 0.1% 함량을 평가하는데 효과적인 것으로 나타났다. 일부 시료에서 온석면과 함께 투각섬석이 소량 수반되고 있음이 나타났으나, 이들의 결정형태와 그 함량과 지질학적 산출상태 등으로 보아, 석면 활용의 목적으로 첨가한 것이 아니고 온석면에 본래 수반되었던 볼순광물로 나타난 것으로 생각된다. X-선회절분석으로 석면상과 비석면상의 구분이 어렵기 때문에 형태를 관찰할 수 있는 광학현미경과 전자현미경의 보조적인 관찰도 필요한 것으로 나타났다. 이번에 사용한 X-선회절분석 방법에서는 가열처리와 산처리에 의한 소실율이 많아 석면의 농집도가 높은 건축자재 시료에 가장 효과적인 것으로 나타났다.