• Journal of The Korea Institute of Healthcare Architecture
• /
• v.24 no.2
• /
• pp.37-44
• /
• 2018

Purpose: This study investigates the influences of coughing direction and healthcare worker's location on the transport characteristics of coughed particles in airborne infection isolation room (AIIR), which is commonly called negative pressure isolation room, with a downward ventilation system. Methods: Computational Fluid Dynamics (CFD) was used to simulate the airflow and for tracing the behavior of particles. Results: The results show that the airflow pattern and coughing direction have a significant influence on the characteristics of particle dispersion and deposition. When healthcare workers are in the isolation room with the patient who is lying on the bed, it is recommended to be located far from the anteroom to reduce the exposures from infectious particles. And when the patient is lying, it is more effective in removing particles than when the patient is in Fowler's position. Although it is an isolation room that produces unidirectional flow, coughing particles can spread to the whole room and a large number of particles can be deposited onto patient, bed, side rails, healthcare worker, ceiling, floor, and sidewall. Implications: Following the patients' discharge or transfer, terminal cleaning of the vacated room, furniture, and all clinical equipment is essential. Also, it is necessary to establish detailed standard operating procedure (SOP) in order to reduce the risk of cross-contamination.

• Journal of the Korean Society of Safety
• /
• v.31 no.6
• /
• pp.25-31
• /
• 2016

This paper has analyzed the structure, applicable regulations and the resistance characteristics of insulation ring type of CSST (Corrugated Stainless Steel Tubing for Gas). With the flammability test conducted in accordance with KS C IEC 60811-1-1, the evaluation of insulation resistance, temperature characteristics, and reliability has been conducted. An insulation ring type CSST consists of protective coating, tube, nut, insulation ring, packing, socket, and ball valve. Connecting an insulation ring type CSST to gas tubings for gas appliance is not permitted, moreover, the product shall be installed inside a sleeve pipe in case of buried installation such as the ceiling. Damages on protective coating and tube were detected when fire was applied to the test sample with a portable torch for 60 seconds. The insulation resistance of a normal product was $49.59M{\Omega}$, while that of the product completed the flammability test reduced to $9.21M{\Omega}$. The mean insulation resistance within the confidence Interval of 95% using the mini tap program 17 was $49.59M{\Omega}$ and the mean insulation resistance within the confidence interval reduced to $9.21M{\Omega}$. In the normal distribution analysis of 95% confidence interval, the value-P of the normal product was stable at 0.075 and AD(Anderson-Darling) statistic value was turned out to be 0.063, which is very normal, and the standard deviation was analyzed as 0.2586. The value P of the product completed the flammability test resulted in 0.005, the AD was 1.355 and the standard deviation reduced to 0.07908.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.1
• /
• pp.255-259
• /
• 2016

Background: Reliable and validated instruments are needed in order to study the quality of life in myeloma patients. This study aimed to translate and explore the psychometric properties of the European Organisation for Research and Treatment of Cancer (EORTC) myeloma module (QLQ-MY20) in Iranian patients. Materials and Methods: Two hundred and fifteen patients with multiple myeloma (MM) were recruited from Imam Khomeini Hospital, Tehran. A standard forward-backward translation procedure was implemented. Participating patients were asked to complete the EORTC QLQ-C30 and the QLQ-MY20 three times, at study entry, after two weeks, and again after three months. Data were tested for the range of measurement, internal consistency, test-retest reliability, known group comparison, responsiveness and factor structure. Results: Mean age of the patients was 60.7 years. No floor and ceiling effects were seen for the QLQ-MY20. Cronbach's ${\alpha}$ was greater than 0.80 for all three multi-item scales (ranging from 0.82 to 0.93). All four scales had test-retest reliability of 0.85 or greater. Results of the confirmatory factor analysis that the hypothesized 3-scale measurement model of the QLQ-MY20. Moreover, the Persian version for the QLQ-MY20 differentiated between subgroups of the patients in terms of beta-2 microglobulin, fracture and performance status. The responsiveness of the QLQ-MY20 to change over time was confirmed within 3 months. Conclusions: the results of our study indicate that our Iranian version of the QLQ-MY20 is a feasible, reliable and valid questionnaire for assessing the condition-specific quality of life of patients with MM.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.7
• /
• pp.709-716
• /
• 2013

A fan filter unit (FFU) is a device which supplies clean air from the ceiling in a clean room. With an increase in its size, velocity variation occurs within the exhaust plane and this damage the product quality or productivity. Hence, a guide vane is installed inside the device to enhance the velocity uniformity. Because the vane reduces the flow rate for a given pumping power, an optimum design is required to achieve velocity uniformity while minimizing the flow rate reduction at the same time. To find a geometry that satisfies these requirements, a series of numerical simulations has been conducted while changing the angle and length of the guide vanes. By changing the geometry of the side guide vane, the velocity uniformity increased by 3.7% and the flow rate decreased by 1.5%. For the center guide vane, the velocity uniformity increased by 2.9% and the flow rate decreased by 0.7%.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1892-1897
• /
• 2003

A new thermal inkjet printer head on SOI wafer with virtual valve was proposed. It was composed of two rectangular heaters with same size. So we could call it T-jet(Twin jet). T-jet has a lot of merits. It has the advantage of being fabricated with one wafer and is easy to change the size of chamber, nozzle, restrictor and so on. However, above all, It is the best point that T-jet has a virtual valve. And it was manufactured on SOI wafer. The chamber was formed in its upper silicon whose thickness was 40um. The chamber's bottom layer was silicon dioxide of SOI wafer and two heaters were located underneath the chamber's ceiling. And the restirctor was made beside the chamber. Nozzle was molded by process of Ni plating. Ni was 30um thick. Nozzle ejection test was performed by printer head having 56 nozzles in 2 columns with 600NPI(nozzle per inch) and black ink. It measured a drop velocity of 12m/s, a drop volume of 30pl, and a maximum firing frequency of 12KHz for single nozzle ejection. Throwing out the ink drop in whole nozzles at the same time, it was observed that the uniformity of the drop velocity and volume was less than 4%.

• KIEAE Journal
• /
• v.7 no.1
• /
• pp.65-72
• /
• 2007

As ecological design elements, daylighting can be applied to provide adequate illumination on visual tasks to create an attractive visual environment and to save electrical energy. Daylighting control systems reject direct sunlight and penetrate it onto the ceiling or to deep into the room. This study aims to evaluate the luminance environment of sloped light guide with automated venetian blind systems according to sun angle changes. For evaluation, a mock-up model was used and the south facing side-window mounted between the clerestory window and the view window. To assess luminance performance, 3 view points of luminance were monitored. As results, the conventional and lightshelves show ideal luminance ratio between workplane and surroundings(3:1) and workplane and darkness area(2:1) due to total ratio of surroundings and darkness area has lower ratio than workplane. Compared to the lightshelves window, conventional window shows unrelieved effect in between the workplane and brightness area(1:5). It means that there has low deviation according to the required standards. Also, compared to the ratio between the brightness area and darkness area(2~6:1) conventional window with high deviation(10~20:1) provide discomfort glare due to the excessively strong contrast, while lightshelves window shows a required luminance ratio that provide a three-dimensional effect to occupants. Therefore, luminance distribution indicate that application of a lightshelves and blinds not only has a significantly positive effect but also offers higher luminance quality in a daylit room

• Smart Media Journal
• /
• v.5 no.4
• /
• pp.103-110
• /
• 2016

This study aims to establish the standards to give the design weight in case when developing equipment designs, by classifying products with similar purposes in accordance with the morphological characteristics and also extracting the typicality. Limiting the sampling group for the extraction of the typicality to a pendant-type and a ceiling buried-type through the preceding case study and consultation with experts, the survey was conducted for majors and relevant workers in six cities, sampling products released in Korea and Japan before May 2016. The 1st survey was about the Morphological classification, and the 2nd times about the extraction of the typicality while the 3rd one was about the classification of the morphological attributes. By drawing the design attributes based on the functional/morphological classification and formative principles, it aimed to establish the base of the future research on the measurement of design weight. The results of this study aim to efficiently establish the roles of design technology in accordance with changes in the lighting fixture market caused by the substitution of light sources, and also to draw the development direction to rapidly cope with the accelerated changes in lighting design types and corporate R&D.

• Journal of Korean Physical Therapy Science
• /
• v.23 no.1
• /
• pp.18-23
• /
• 2016

Purpose : The purpose of the present study is to report the effect of proprioception of ankle after kinesiotaping application on ankle. Method : This study has conducted to target 30 average adult subjects with no damage to the ankle joint (16 males and 14 females). The group is divided into experimental group and sham groups in random way. The subjects in the experimental group are applied taping kinesiology on ankle joint. The subjects in the sham group are applied a sham taping on the ankle joint which is not actually affected for real ankle joint problem. Each subjects in both groups has tree trials in plantarflexion, dorsiflexion, inversion, and eversion before and after application of the kinesiotaping or sham taping of the bare footed ankle. The outcome were determined from the difference between the target angle and the trial angle produced by the subject. Results : These results from the experiment shows that the experimental group compared to the difference in kinesiotaping angle values were significantly different from each dorsiflexion (DF), eversion (EV) (p<.05). Otherwise, in the sham group did not produce significant differences in any joint movement. In addition, when we compared between two groups (the experimental and sham groups), it did not show that there was significant differences. Conclusion : First, there is no significant difference between the sham group and kinesiotaping group after proprioceptive tests. Second, even though there is no significant outcome in statistical analysis, there is actual differences in the experiment. This result might be ceiling effect, and if the kinesiotaping were applied to actual ankle injury patients, this taping treatment could be very effective for curing this patient.

• Journal of Biosystems Engineering
• /
• v.32 no.1 s.120
• /
• pp.13-19
• /
• 2007

Storage rough rice in low temperature using the winter cold air avoids rough rice temperature increase which happens from early May, and this is possible by installing a cooling system in the top of a bin, the room between top rice level and bin ceiling. The research objective is to establish low temperature rough rice storage technique, furnishing winter cold air to rough rice, by investigating the cooling system potential of maintaining low rough rice temperature and by analyzing rough rice storage characteristics over a storage period. The rough rice storage characteristics were evaluated from January to August 2003, using a storage and dry bin of 400-ton capacity. Results of this research are as follows: Cooling bin using the cooling system in the top of the bin maintained the rice temperature less than 15$^{\circ}C$ in entire portions in August. Moisture contents and germination rates of rough rice were decreased over the storage period, on the other hand, the rough rice stored in the ambient temperature bin had relatively lower moisture contents and germination rates to compare with the bin using winter cold air. Crack ratio and acid value of brown rice in the ambient temperature bin storage had increased more than the cooling bin storage. The result indicates that the storage bin using winter cold air and the cooling system maintains moisture content and germination of rice, minimizes cracked kernel and acid value, and preserves rice quality as well.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.17
• /
• pp.7-35
• /
• 2002

In many international financing transactions Korean companies are required to issue a guarantee. Thus far, however, legal issues on international guarantees have not been fully discussed in Korea. This is partly because most of the international guarantees are governed by a foreign law such as English law or the laws of the State of New York. In this articles the author examines major concepts or terms and conditions of a typical international guarantee, e.g., language on consideration, primary obligor, joint and several guarantee, unconditional and irrevocable guarantee, continuing guarantee, right of subrogation, representations and warranties, covenant or undertaking, currency indemnity, assignment, participation, governing law and jurisdiction clause, etc. For reference, standard forms of a guarantee and a standby letter of credit are attached to the article. In examining the terms and conditions, the author compares them with similar or equivalent concepts under Korean law. The author further discusses some Korean law issues that may arise under international guarantees governed by a foreign law. These issues include the application of the ultra vires doctrine under Article 34 of the Civil Code of Korea, the validity of an international guarantee which a Korean company has issued in violation of the guarantee ceiling set under Article 10 of the Law on Monopoly Regulation and Fair Trade of Korea and the validity of an international guarantee which a Korean party has issued in violation of the Foreign Exchange Transaction Law. In addition, the author discusses some issues under a so-called independent guarantee and a standby letter of credit. In this regard, reference is made to the Uniform Rules for Demand Guarantee (URDG), International Standby Practices (ISP98) and the Convention on Independent Guarantees and Stand-by Letters of Credit adopted by the United Nations in 1995. Finally, the author examines major terms and conditions of typical comfort letters and discusses some legal issues, such as the binding force of the comfort letter. In dealing with the issues the author underscores that to the extent the issues are not properly dealt with by an international norm such as Uniform Customs and Practice for Documentary Credits or ISP 98, the issues must be analyzed by reference to the governing law of the relevant instrument.