• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.3
• /
• pp.34-42
• /
• 1994

The present study is aimed to improve the PIV performance by suggesting a two-frame particle identification technique and by introducing estimation method of wall pressure distribution from the velocity data. Adopted image processing system consists of one commercial image board slit into a personal computer, 2-D sheet light generator, flow picture recording apparatus and related particle identification software. A revised particle tracking method essential to PIV performance is obtained by particle centroid correlation pairing (CCP) and its effectiveness is ascertained by comparison with multi-frame identification.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.175-180
• /
• 1998

중수로에 0.88 w/o 의 순환 핵연료를 사용하여 기존 중수로의 출력을 증강시키는 방안이 모색되었다. 기존 중수로와 양립하여야 하므로, 37봉 핵연료 다발과 CANFLEX 핵연료다발에 대한 격자 특성 계산과 노심 계산을 수행하였다. 열수력 여유도 증가와 고연소도 핵연료를 위하여 개발한 개량 핵연료 (CANFLEX)를 사용하면 원자로의 임계채널출력 (CCP)이 5 % 이상 증대하므로, 기존 원자로의 총 출력을 같은 열수력 한계 내에서 5 % 증가시킬 수 있다. 또한 개량 핵연료 다발에 순환우라늄을 사용하면 기존 월성 원자로의 구조 변화 없이 노심 출력분포의 재 분포에 의하여 15 % 까지 출력을 증강할 수 있다고 평가되었다.

• Applied Science and Convergence Technology
• /
• v.26 no.6
• /
• pp.195-200
• /
• 2017

A mobile lab kart for plasma training is developed with a high vacuum pumping system, vacuum gauges and a glass discharge tube powered by a high voltage transformer connected to a household 60 Hz line. A numerical model is developed by using a commercial multiphysics software package, CFD-ACE+ to analyze the experimental data. Simulations for argon and nitrogen were carried out to provide fundamental discharge characteristics. Variations of the kart configuration were demonstrated: a glass tube with three electric probes, optical emission spectrometer attachment and infra red thermal imaging system to give more detailed analysis of the discharge characteristics.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.29 no.2
• /
• pp.180-188
• /
• 2015

This study was conducted to investigate the relaxation effects and its mechanisms of Nelumbinis Semen(NS) extract in isolated rabbit corpus cavernous tissues. In order to examine the relaxation effects and its mechanisms of NS, we treated the ethanol extract of NS(0.01-3.0 mg/ml) and indomethacin(IM), tetraethylammonium chloride(TEA), Nω -nitro-L-arginine (L-NNA), methylene blue(MB) were treated before NS extract to contracted strips induced by PE 1 μM. We also treated calcium chloride(Ca) 1 mM after pretreatment of NS extract in Ca²⁺-free krebs-ringer solution to contracted strips induced by PE. Cell viability and NO concentration on human umbilical vein endothelial cell(HUVEC) was measured by MTT assay, Griess reagent system. eNOS production was investigated by histochemical and immunohistochemical staining. NS extract was significantly affected on the relaxation of cavernous strips and NS extract-induced relaxation was not different by pretreatment of IM, TEA, MB, but inhibited by the pretreatment of L-NNA. And increase of contraction induced by Ca²⁺ addition, in a Ca²⁺-free solution, was decreased by pretreatment of NS. NO concentration on HUVEC was increased. When NS extract was applicated on corpus cavernosum of penis(CCP) in SHR, ratio of smooth muscles to collage fibers by PE was decreased and formation of eNOS around helicine artery was increased. These results suggest that CCP relaxation effects of NS extract are shown by suppressing influx of extracellular Ca²⁺ through the production of NO and eNOS.

• Preventive Nutrition and Food Science
• /
• v.5 no.3
• /
• pp.153-159
• /
• 2000

A 4.4 kb DNA fragment encompassing lacA (galactoside acetyltransferase) and lacZ($\beta$-galactosidase) genes from Lactococus lactis ssp. lactis ATCC 7962 (L. lactis 7962) was introduced ito a Lac strain, Lactococcus lactis ssp. lactis MG1363 (L. lactis MG1363) by using a lactococcal expression vector, pMG36e and expression level of lacZ was examined. Growth rates and $\beta$-galactosidase ($\beta$-gal) activities of MG1363 cells carrying recombinant plasmid, pMLZ3, on M17 broth containing different carbon sources (1%, w/v) were examined. Contrary to the expectations, MG1363 [pMLZ3] grown on lactose showed the lowest enzyme activity (17 units) and cells grown on galactose had the highest $\beta$-gal activity (41 units). Cells grown on glucose had intermediate activity (33 units). These activities are about one tenth of the values observed in L. lactis 7962 where lacZ is present as a single-copy gene in the chromosome. When the cellular concentrations of lacZ transcript were examined using slot blot hybridization, it was found that MG1363[pMLZ3] produced sufficient amounts of transcript. These results indicate that either proteolytic degradation of $\beta$-gal or other regulatory mechanism prevent the translation or accumulation of $\beta$-gal in L. lactis MG1363 cells. In regard to regulation, the presence of the ccpA gene in L. lactis MG1363 was confirmed by Southern blot.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.1
• /
• pp.131-137
• /
• 2001

Previous work has identified that only the catabolite responsive element A (creA; previously called cre-2) out of two potential cre sequences (cre-1: nucleotide +160 to +173 and cre-2: +173 to +186), recognized within the coding region of the xylanaseA gene (xynA) of Bacillus stearothermophilus No.236, was actually, was actually involved in the carbon catabolite repression(CCR) of xynA expression in B. subtilis. However, the level of CCR of xynA expression in the original B.stearothermophilus No.236 strain (70-fold repression). Therefore, to search for an additional cre element in the promoter region, the upstream region of the xynA gene was subcloned by chromosome walking, and as a result, another potential cre element (nucleotide -124∼-137; designated creB) was recognized in this region. The cre-like sequence revealed a high homology to the cre consensus sequence. The xylanase activity of B. subtilis MW15 bearing pWPBR14 (containing creA and creB) cultured in a medium containing xylose as the sole carbon source was about 7.7 times higher than that observed for the same culture containing glucose. B. subtilis MW15 bearing pWPBR23 (containing only creA) produced an activity about 2.4 times higher. This pattern of CCR was confirmed using derivatives of xynA::aprA fusion plasmids. Furthermore, a measurement of the amounts of the xynA transcript showed a similar pattern as that for the production of xylanase. In addition, the synthesis of xylanase in B. subtilis QB7115 [a catabolite control protein A (ccpA) mutant strain] carrying pWPBR14 was almost completely relieved from glucose repression. Together, these results lead to a conclusion that the CCR of the expression of the xynA gene is mediated by CcpA binding at creA and creB sites in B. subtilis.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.2
• /
• pp.147-152
• /
• 2012

This paper dealt with the frequency component analysis of acoustic signals produced by corona and series-arc discharges as a diagnostic technique for closed-switchboards. Corona and series-arc discharge were simulated by a needle-plane electrode and an arc generator specified in UL1699, respectively. Acoustic signal was detected by a wideband acoustic sensor with a frequency bandwidth of 4 Hz~100 kHz (-3 dB). We analyzed frequency spectrums of the acoustic signals detected in various discharge conditions. The results showed that acoustic signals mainly exist in ranges from 30 kHz to 60 kHz. From the experimental results, an acoustic detection system which consists of a constant current power supply (CCP), a low noise amplifier (LNA) and a band pass filter was designed and fabricated. The CCP separates the signal component from the DC source of acoustic sensor, and the LNA has a gain of 40 dB in ranges of 280 Hz~320 kHz. The high and the low cut-off frequency are 30 kHz and 60 kHz, respectively. We could detect corona and series-arc discharges without any interference by the acoustic detection system, and the best frequency is considered in ranges of 30 kHz~60 kHz.

• Journal of the Korean Vacuum Society
• /
• v.20 no.5
• /
• pp.322-326
• /
• 2011

Etch process of silicon dioxide layer by using capacitively coupled plasma (CCP) is currently being used to manufacture semiconductor devices with nano-scale feature size below 50 nm. In typical CCP plasma etcher system, plasmas are generated by applying the RF power on upper electrode and ion bombardment energy is controlled by applying RF power to the bottom electrode with the Si wafer. In this case, however, etch results often drift due to heating of the electrode during etching process. Therefore, controlling the temperature of the upper electrode is required to obtain improvement of etch repeatability. In this work, we report repeatability improvement during the silicon dioxide etching under extreme process conditions with very high RF power and close gap between upper and bottom electrodes. Under this severe etch condition, it is difficult to obtain reproducible oxide etch results due to drifts in etch rate, critical dimension, profile, and selectivity caused by unexpected problems in the upper electrode. It was found that reproducible etch results of silicon dioxide layer could be obtained by controlling temperature of the upper electrode. Methods of controlling the upper electrode and the correlation with etch repeatability will be discussed in detail.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.307-307
• /
• 2013

초고집적 회로에 적용되는 반도체 소자의critical dimension (CD)이 수 nano 사이즈로 줄어들고 있기 때문에, 다양한 물질의 식각을 할 때, 건식식각의 중요성이 더 강조되고 있다. 특히 $SiO_2$와 같은 유전체 물질을 식각할 때, plasma process induced damages (P2IDs)가 관찰되어 왔고, 이러한 P2IDs를 줄이기 위해, pulsed-time modulation plasma가 광범위하게 연구되어 왔다. Pulsed plasma는 정기적으로 radio frequency (RF) power on과 off를 반복하여 rf power가 off된 동안, 평균전자 온도를 낮춤으로써, 웨이퍼로 입사되는 전하 축적을 효과적으로 줄일 수 있다. 또한 fluorocarbon plasmas를 사용하여 $SiO_2$를 식각하기 위해 Dual-Frequency Capacitive coupled plasma (DF-CCP)도 널리 연구되어 왔는데, 이것은 기존의 방법과는 다르게 plasma 밀도와 ion bombardment energy를 독립적으로 조절 가능하다는 장점이 있어서 미세 패턴을 식각할 때 효과적이다. 본 연구에서는 Source power에는 60 MHz pulsed radio frequency (RF)를, bias power에는 2 MHz continuous wave (CW) rf power가 사용된 system에서 Ar/$C_4$ F8/$O_2$ 가스 조합으로, amorphous carbon layer (ACL)가 hard mask로 사용된 $SiO_2$를 식각했다. 그리고 source pulse의 duty ratio와 pulse frequency의 효과에 따른 $SiO_2$의 식각특성을 연구하였다. 그 결과, duty ratio의 감소에 따라 $SiO_2$, ACL의 etch rate이 감소했지만, $SiO_2$/ACL의 etch selectivity는 증가하였다. 반면에 pulse frequency의 변화에 따른 두 물질의 etch selectivity는 크게 변화가 없었다. 그 이유는 pulse 조건인 duty ratio의 감소가 전자 온도 및 전자 에너지를 낮춰 $C_2F8$가스의 분해를 감소시켰으며, 이로 인해 식각된 $SiO_2$의 surface와 sidewall에 fluorocarbon polymer의 형성이 증가하였기 때문이다. 또한 duty ratio의 감소에 따라 etch selectivity뿐만 아니라 etch profile까지 향상되는 것을 확인할 수 있었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.3
• /
• pp.337-343
• /
• 2020

The third phase of NASA's 3D-Printed Habitat Challenge (part of a NASA's Centennial Challenges Program competition) required entrants to build a one-third-scale space exploration habitat (10 ㎡) using 3D-printing technology. This study addresses a proposed habitat (diameter: 3 m, height: 2 m) in accordance with the competition rules. The study focus is to find the most appropriate binder when KOHLS-1 was mixed for extruding and stacking as 3D printing feedstock using pellets, and to build a prototype structure as required by the competition. Unlike previous studies, this study was based around the binders and construction method, not around axis transfer velocity, flow rate, and heater temperature.