• Design & Manufacturing
• /
• v.15 no.1
• /
• pp.1-7
• /
• 2021

The position of the gate is one of the important factors for optimal injection molding. This is because inappropriate gate positions cannot fill the cavity uniformly, which can lead to defects such as contraction. In this study, CAE was performed on hot runner injection molding of the washing machine base and plasticity was compared by changing gate position from existing gate position. A total of two alternatives have been applied to compare the plasticity of the washing machine base according to its optimal gate position. The gate position of the improved molds and the gate position of the current mold is analyzed by injection molding analysis. The results of the fill time, the pressure at V/P switchover, clamping force, and deflection were compared. In washing machine base injection molding, the deflection was reduced by about 3.76% in the improved mold 2. In improved mold 1, the fill time during injection molding was reduced by 3.32% to enable uniform charging, and the clamping force was reduced by 31.24%. We have confirmed that the position of the gate can change the charging pressure and the clamping force and affect the quality and cost savings of the molded product.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.6 no.1
• /
• pp.136-142
• /
• 2004

The method of insertion of T-type cannula into the proximal duodenum of cattle was established for the feed digestibility test. Five cattle were anesthetized with rumpun and 2% lidocaine. The incision(15 ~ 20 cm) through the abdominal wall exposing the peritoneal cavity was made. The identified duodenum was extracted through the abdominal incision. The cannula was inserted into the incised duodenal wall. Cannula barrel was extracted between the 10th and 11th rib. All of operated cattle were healthy and cannula remained completely functional until 20 months after a proximal duodenal cannulation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.334-341
• /
• 2016

In this paper, the study of a waveguide aperture-coupled feed-structured antenna has been conducted for the purpose of applying it to a wireless back-haul system sufficient for high-capacity gigabits-per-second data rates. For this study, a $32{\times}32$ waveguide slot sub-array antenna with a corporate-feed structure was designed and produced. Also, this antenna is used at 57 GHz to 66 GHz in the V-band. The construction of the antenna is a laminated form with radiating parts (outer groove and slot, cavity), a coupled aperture, and feeds in each. The antenna was designed with HFSS, which is based on 3D-FEM, produced with aluminum processed by a precision-controlled milling machine, and assembled after a silver-plating process. The measurement result from analysis of the characteristics of the antenna shows that return loss is less than -12 dB, VSWR < 2.0, and a wide bandwidth ranges up to 16%. An overall first side lobe level is less than -12.3 dB, and a 3 dB beam width is narrow at about $1.85^{\circ}$. Also, antenna gain is 38.5 dBi, offering high efficiency exceeding 90%.

• Tunnel and Underground Space
• /
• v.24 no.6
• /
• pp.449-463
• /
• 2014

There are many case studies and application cases in abandoned mines for hydraulic filling method filled by slurry or paste form, but research on the pneumatic filling is not applied in Korea. The damage of steel pipe is occurred by wear due to the flow of filling material in the bent area of steel pipe in traditional pneumatic filling method. In this study, the new pneumatic filling method was developed using a newly devised improved nozzle to improve the above problem. The model test for mine filling was performed in the laboratory for the simulated accessible or inaccessible mine cavities, and the filling efficiency by the results obtained from the test was calculated. The filling efficiency was analyzed from the variation of outlet angle, feed rate and grain size of sand in model test of simulated accessible mine cavity. The superiority of improved pneumatic filling method was proved through the analysis of filling efficiency by the results obtained from each model tests of gravitational, traditional, and improved filling method in simulated inaccessible mine cavity.

• Journal of Aquaculture
• /
• v.1 no.1
• /
• pp.53-66
• /
• 1988

Histological study was conducted to determine the initial treatment time and treatment period of hormone for sex reversal in accordance with gonadal development and sexual differentiation in Oreochromis niloticus. The effects of various concentrations and various treatment periods of 17$\alpha$-methyltestosterone (MT) on sex reversal, growth, and condition factor were also evaluated. Paired primodial gonads were formed 9 days after hatching, when germ cells began their gradual multiplication and development into gonial ones. Sex differentiation of gonads either into ovaries or testes became histologically discernible about 20 days after hatching with formation of ovarian cavity and efferent duct. All feed treated with MT at 15 ppm for 10 days or more produced populations of males $95\%$ or above. All male populations were produced at 15 ppm MT for 40 days, and 30 ppm for 30 and 40 days. Growth of hormone-treated-fish was faster than that of untreated ones and the condition factor of hormone-treated-fish was greater than that of untreated ones 77 days after hatching.

• Journal of Sensor Science and Technology
• /
• v.29 no.5
• /
• pp.354-359
• /
• 2020

The high vacuum hermetic sealing technique ensures excellent performance of MEMS resonators. For the high vacuum hermetic sealing, the customization of anodic bonding equipment was conducted for the glass/Si/glass triple-stack anodic bonding process. Figure 1 presents the schematic of the MEMS resonator with triple-stack high-vacuum anodic bonding. The anodic bonding process for vacuum sealing was performed with the chamber pressure lower than 5 × 10^-6 mbar, the piston pressure of 5 kN, and the applied voltage was 1 kV. The process temperature during anodic bonding was 400 ℃. To maintain the vacuum condition of the glass cavity, a getter material, such as a titanium thin film, was deposited. The getter materials was active at the 400 ℃ during the anodic bonding process. To read out the electrical signals from the Si resonator, a vertical feed-through was applied by using through glass via (TGV) which is formed by sandblasting technique of cap glass wafer. The aluminum electrodes was conformally deposited on the via-hole structure of cap glass. The TGV process provides reliable electrical interconnection between Si resonator and aluminum electrodes on the cap glass without leakage or electrical disconnection through the TGV. The fabricated MEMS resonator with proposed vacuum packaging using three-layer anodic bonding process has resonance frequency and quality factor of about 16 kHz and more than 40,000, respectively.

• Journal of Dairy Science and Biotechnology
• /
• v.23 no.2
• /
• pp.149-153
• /
• 2005

Lactic acid bacteria had been widely utilized in fermented foods such as fermented dairy products, traditional sauces, kimchi, fermented sausages, medicines or probiotic feed additives for a long time. LAB are also widely distributed in the mammalian gastrointestinal tracts, oral cavity, vagina, and various foods or soils. The most familiar examples of using LAB would be the fermented milk products, and those had become one of the favorite foods in Korea f3r more than 34 years of history. The main benefits of the fermented milk products were originally the improvement of the balance of intestinal flora to control diarrhea and congestion disorders, and gradually, they were chosen by the consumer preference of the taste. The very beginning of the fermented milk products in Korea was the Yakult type products in 1971, and it was the commencement of the solid foundation of the dairy industry and the understanding beneficial effect of probiotic yogurt. After middle of 80's, stirred type fermented milk products had been firstly produced, and it was the time that the domestic dairy industry took root in Korea. From 90's, functional fermented milk products were produced, and drink type yogurt sales a mount increased drastically, and these products began to be chosen not only with the values of nutrition but also with physiological functions. The health claims are classified into intestinal health, gastric health and hepatic health. The prospects for the Korean market are as follows; The majority of leading products would be the premium functional yogurt products as it was last year. It is because the sales of lower cost products shows slow-down, and industries tend to increase the commercial advertisements of premium functional yogurt products through mass media. These tendencies would make the market situation become more competitive.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.17 no.3
• /
• pp.181-191
• /
• 2007

With the 2-Butanethiol, which is an unidentified inhalation toxic material, acute inhalation toxicity was tested with SD rats. The $LC_{50}$ was evaluated to be 2,500 ppm (9.22 mg/L) or higher which falls under the criteria of acute toxicity Category 3 (500<$LC_{50}$<2,500 ppm) in the Industrial Safety and Health Act. In the subchronical inhalation toxicity test by 0, 25, 100, and 400 ppm, 6 hours a day, 5 days a week, for 13 weeks repeated exposure, though no death or particular clinical presentation was observed, in the female 25 and 400 ppm group, including weight change, and in each concentration group including 400 ppm, change of feed rate, eye stimulation, motility change in male group, and lesions in blood and blood biochemical were observed. In the internal organs weight, 25, 100, and 400 ppm groups in male and 400 ppm group in female showed significant (p<0.05) changes in kidney, liver, thymus, and lung. In the pathological tissue test, severe cortical tubular hyaline droplets were observed in the male 400 ppm group, and all male rats of 400 ppm group and 2 female individuals showed tubular degeneration/regeneration accompanied with pigmentation, showing that the target organs of inhalation exposure of 2-Butanethiol are spleen, kidney, nasal cavity, and adrenal. Through the tests, the NOEL of 2-Butanethiol was evaluated to be 25 ppm (0.092 mg/L) or less for both male and female.

• Design & Manufacturing
• /
• v.16 no.4
• /
• pp.67-74
• /
• 2022

Injection molding is a cyclic process comprising of cooling phase as the largest part of this cycle. Providing efficient cooling in lesser cycle times is of significant importance in the molding industry. Recently, lots of researches have been done for rapid cooling of a hot-spot area using CO2 in injection molding. The CO2 flows under high pressure through small, flexible capillary tubes to the point of use, where it expands to create a snow and gas mixture at a temperature of -79℃. The gaseous CO2 removes heat from the mold and releases it into the atmosphere. In this paper, a CO2 cooling module was applied to an injection mold in order to cool a large area cavity uniformly and quickly, and the cooling performance of the injection mold was investigated. The product was a high-curvature molded part with a molding area of 300x100mm. Heat cartridges were installed in a stationary mold, and CO2 cooling module was inserted inside a movable mold. Through structural analysis, it was confirmed that the maximum deformation of mold with CO2 cooling module was 0.09mm. A CO2 feed system with a heat exchanger was used for cooling experiments. The CO2 was injected into the holes on both sides of the supply pipe of the cooling module and discharged through hexagon blocks to cool the mold. It took 5.8 seconds to cool the mold from an average temperature of 140℃ to 70℃. Through the experiment using CO2 cooling module, it was found that a cooling rate of up to 12.98℃/s and an average of 10.18℃/s could be achieved.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.8
• /
• pp.492-497
• /
• 2015

VOCs (Volatile Organic Compounds) are generally generated in the painting process, or at the company and laundry where use organic solvents. The VOCs consist of various hydrocarbons and has low calorific value due to its dilution with atmospheric air. Therefore, the VOCs are difficult to burn by a conventional fuel combustor. In this study, a novel plasma dump combustor was proposed for the treatment of low calorific VOC gases. This combustor was designed a combination of the characteristics in a plasma burner, a dump combustor and a 3D matrix burner. The combustor has good structure for maintaining enough residence time and reaction temperature for stable flame formation and VOC destruction. For investigating the performance characteristics of the plasma dump combustor, an experiment was achieved for VOC feed rate, VOC injector position, etc. Toluene was used as a surrogate of VOC. The novel combustor gave better performance than a conventional combustor, showing that VOC destruction rate and energy efficiency were 89.64% and 12.27 kg/kWh respectively, at feeding rate of 450 L/min of VOC of 3,000 ppm of toluene concentration.