• Journal of electromagnetic engineering and science
• /
• 제14권3호
• /
• pp.306-313
• /
• 2014

A Fabry-Perot resonator cavity antenna for Ku-band application is presented in this paper. The Fabry-Perot cavity is formed by a ground plane and a frequency selective surface (FSS) made of a circular hole array. The cavity resonance is excited by a single-feed microstrip patch located inside the cavity. The measured results show that the proposed antenna has an impedance bandwidth of approximately 13% ($VSWR{\leq}2$) and a 3-dB gain bandwidth of approximately 7%. The antenna produces a maximum gain of 18.5 dBi and good radiation patterns over the entire 3-dB gain bandwidth. The antenna's very thin profile, high directivity, and single excitation feed make it promising for use in wireless and satellite communication applications in a Ku-band frequency.

• Journal of Electrical Engineering and Technology
• /
• 제8권4호
• /
• pp.856-862
• /
• 2013

A cavity-backed two-arm spiral antenna for partial discharge diagnosis is presented. The proposed antenna consists of a two-arm Archimedean spiral, a tapered microstrip balun as spiral antenna feed, and a ring-shaped absorber-loaded cavity. The Archimedean spiral antenna is designed for the operating frequency band of 0.3 GHz to 1.5 GHz and fed by the tapered microstrip balun. The cavity is utilized to transform the bidirectional beam into a unidirectional beam, thereby enhancing gain. The ring-shaped absorber is stacked in the cavity to reduce the reflected waves from the cavity wall. The proposed antenna is designed and simulated using CST Microwave Studio. A prototype of the proposed antenna is likewise fabricated and tested. The measured radiation patterns are directional to the positive z-axis, and the measured peak gain is 8.13 dBi at a frequency of 1.1 GHz.

• 한국전자파학회논문지
• /
• 제23권9호
• /
• pp.1025-1033
• /
• 2012

이 논문에서는 인공 자기 도체를 이용한 패브리 패롯 공진기형 안테나에서 배열 급전을 이용하여 스캔 기능을 갖는 안테나의 방사 특성을 분석하였다. 제안하는 안테나는 AMC 면의 도입으로 공진 길이가 1/4 파장으로 감소되었고, 배열 급전기의 도입에 의하여 방사되는 빔의 조향각의 제어가 가능하다. 12 GHz의 주파수에서 배열 급전 요소 간의 간격을 1.4 파장으로 하여 어퍼쳐 크기의 증대에 의하여 약 19 dB의 이득, 14 dB의 SLL 억압비 그리고 $90^{\circ}$의 급전 위상차에서 $8^{\circ}$의 스캔 각도를 얻었다.

• 한국전자파학회논문지
• /
• 제15권12호
• /
• pp.1141-1146
• /
• 2004

본 논문에서는 무궁화 3호 위성의 방송수신용 안테나를 설계 및 제작하였는데, 기존의 방송수신용 안테나보다 넓은 수신영역을 가지는 고이득 안테나를 제작하는데 중점을 두었다. 본 안테나는 급전 라인의 손실을 줄이기 위하여 급전 라인을 도파관 구조로 설계하였다. 또한 방사효율을 높이고 급전 구조를 간단히 하기 위하여 cavity backed slot array 형태의 방사구조를 제안하였다. 슬롯 배열 안테나의 최대 이득은 11.7 GHz$\~$12.75 GHz 대역에서 33 dEi 이상을 얻을 수 있었다. 임피던스 대역폭 또한 VSWR 2:1에서 $13\%$로 설계사양을 만족시켰다.

• Journal of electromagnetic engineering and science
• /
• 제14권4호
• /
• pp.360-366
• /
• 2014

A single-feed composite cavity-backed four-arm curl antenna is presented for use in global positioning systems (GPS). Its primary radiating element is fed by a vacant-quarter printed ring, which helps the antenna directly match to a $50-{\Omega}$ coaxial line and produce a good circular polarization (CP). The cavity-backed reflector is employed to improve the CP radiation characteristics in terms of 3-dB axial ratio (AR) beamwidth and minimum AR value. The optimized design with an overall size of $90{\times}90{\times}25mm^3$ ($0.4725{\lambda}_o{\times}0.4725{\lambda}_o{\times}0.13{\lambda}_o$ at 1,575 MHz) results in a ${\mid}S_{11}{\mid}<-10dB$ bandwidth of 8.66% (1,514-1,651 MHz) and a 3-dB AR bandwidth of 2.23% (1,555-1,590 MHz). The antenna radiates a widebeam right-hand circular polarization and operates with a measured radiation efficiency greater than 90% within its impedance matching bandwidth.

• Journal of electromagnetic engineering and science
• /
• 제5권3호
• /
• pp.105-111
• /
• 2005

This paper presents the basic characteristics of a cutoff cavity-backed aperture antenna with a feed post and a parasitic post inserted parallel to the aperture. It is shown that this type of antenna forcibly resonates the cutoff cavity by adding a single external reactance to the parasitic post. The Galerkin's method of moments is used to analyze integral equations for the unknown electric current on each post and the aperture electric field on the aperture. The value of an external reactance for forced resonance is analytically obtained by deriving a determining equation. Also the current distribution on each post, aperture electric field distributions, and the radiation patterns are discussed. The theoretical analysis is verified by the measured return loss and radiation patterns.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2000년도 춘계종합학술대회
• /
• pp.105-108
• /
• 2000

사용주파수 2.45 GHz에서 렉테나 소자용으로 사용하기 위한 공동 안테나의 기본특성을 포멘트 법을 사용하여 해석하고 있다. 제안된 공동 안테나는 표면에 직사각형의 폭이 좁은 슬롯과 내부에 슬롯면과 수직방향의 급전 및 무급전 포스트를 가지며, RF-DC 변환회로를 공동의 하단부에 장착할 수 있는 구조적 특징을 가진다. 수치계산 결과, 안테나 급전단에서 약 50 dB의 최대 반사손실을 얻고 있다.

• Journal of electromagnetic engineering and science
• /
• 제1권1호
• /
• pp.37-42
• /
• 2001

This paper presents the basic characteristics of a cutoff cavity-hacked slot antenna, for the application of spacetenna, with a feed post and a parasitic post inserted parallel to the slot. This type of antenna might effectively excite the slot and forcibly resonate the cavity by adding external reactance to the parasitic post. The Galerkin\`s method of moments is used to analyze integral equations for the unknown electric current on each post and electric field in the slot. The value of external reactance for forced resonance is discussed by deriving a determining equation, the current distribution on each post and the radiation patterns are considered. The analysis is in excellent agreement with the experiment for the radiation patterns.

• 전자공학회논문지A
• /
• 제32A권12호
• /
• pp.74-79
• /
• 1995

A theoretical method has been considered for the analysis of an annular slot radiator in a metal-backed cylindrical cavity with coaxial feed. In order to check the validity of the method theoretical values of the input return loss and radiation pattern are compared with experimental values. There is good agreement between them.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.82-85
• /
• 1987

Electromagnetic waves from the satellite may be utilized to direct the tracking antenna toward the satellite. We design and fabricate the feed appropriate to the monopulse tracking technique which derive angle-error information on the basis of a single pulse. The feed consists of five cavity-backed turnstile elements mounted on a common ground plane. The turnstile dipole are connected to a set of five quadrature hybrids which convert the dual linear polarization into dual circular polarization. The five feed outputs are then processed in the monopulse comparator which is constructed in microstrip for compactness.