• 터널과지하공간
• /
• 제12권2호
• /
• pp.120-129
• /
• 2002

중부지역에 존재하는 대규모 석회암층을 통과하는 고속도로가 신설되는 가운데, 일부 교량의 교대 하부 얕은 심도에서 자연 생성된 석회암 공동이 다수 발견됨에 따라. 교대 및 교량의 안정성 확보를 위한 추가 정밀조사가 실시되었다. 정밀구조지질조사를 통해 고속도로 노선을 따른 지질도가 작성되었으며 이를 토대로 전기비저항 탐사가 일부 구간에 대해 실시되었다. 이 결과 석회암 공동의 존재가 의심되는 부분에 대해 국부적 인 탄성파탐사가 수행됨으로써 석회암 공동의 위치 및 규모가 최종 파악되었으며, 일련의 현장조사 및 실험실 시험결과를 이용한 수치해석이 이루어졌다. 수치해석에 의한 교대 및 교량의 안정성 분석 결과, 시멘트 그라우팅에 의한 교량하부 기초의 보강이 제안되었다.

• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.20-42
• /
• 1998

The present study was designed to understand the basic principles of the laser system and to assess the optimal coditions of the Nd:YAG laser irradiation system in order to expand the use of the laser system in the dental field. The laser system used in this study was a pulsed-wave output type and the power level is 9 watts. The incisors of developing rats were irradiated with the laser system explained above for 0.5, 1, and 2 seconds giving energy density 71, 167, and 215 J/$cm^2$ respectively. The rats were sacrificed just after irradiation or 10 minutes and 10 days after irradiation. The specimens were examined with the stereoscope, light microscope and transmission electron microscope. The results are as follows: 1. The tissue removal efficiency (depth of the cavity formed) is increased with the energy density after Nd:YAG laser irradiation. 2. The carbonized area is increased with the energy density. Cracks and melted appearance are seen in all kinds of the energy densities. 3. The lacunae in the damaged alveolar bone by the laser irradiation were empty, while those in the newly formed bone were occupied with the osteocytes. The damaged alveolar bone was repaired by the osteoblasts and macrophages on the periphery of the bone matrix. 4. The damaged enamel was replaced by the loose connective tissues showing many kinds of cells. The ameloblasts were differntiated on the replaced loose connective tissue. 5. The damaged dentin was repaired by the irregular dentin formed by the odontoblasts differentiated from the mesenchymal cells migrated from the pulp core.

• Journal of Radiation Protection and Research
• /
• 제13권2호
• /
• pp.21-28
• /
• 1988

LiF : PTEE를 사용하여 중경 X-선(HVL : 0,29, 0.84, 1.60, 2.62mmCu) 영역에 대한 수중 흡수선량을 측정 해석하였다. 이때 선량계 (0.4mm ${\times}\;{\phi}$12.5mm, hot-pressed LiF TLD-700)는 루사이트로 둘러 싸여 있고 물의 흡수선량은 각각의 TL출력 값에 Burlin의 공동이론을 적용하여 해석하였다. 그 결과 물 팬텀 속 깊이 5cm에서 흡수선량률의 측정 오차는 최대 ${\pm}5%$로 나타났다. 이 측정값을 측정 오차가 ${\pm}2%$의 간접절대측정방법인 이온화법에 의한 측정값과 비교한 결과 두 값의 차이는 LiF : PTFE의 측정오차 범위 내에서 일치하였다. 이와같은 결과로 LiF : PTFE를 이용한 수중 흡수선량 측정의 신뢰성을 확인할 수 있게 되었으며 이는 중경 X-선 영역에 대한 선량당량 평가의 근거로 활용 될 수 있을 것이다.

• Archives of Plastic Surgery
• /
• 제48권5호
• /
• pp.518-523
• /
• 2021

Epignathus is a rare congenital orofacial teratoma that arises from the sphenoid region of the palate or the pharynx. It occurs in approximately 1:35,000 to 1:200,000 live births representing 2% to 9% of all teratomas. We present the case of a newborn of 39.4 weeks of gestation with a tumor that occupied the entire oral cavity. The patient was delivered by cesarean section. Oral resection was managed by pediatric surgery. Plastic surgery used virtual 3-dimensional models to establish the extension, and depth of the tumor. Bloc resection and reconstruction of the epignathus were performed. The mass was diagnosed as a mature teratoma associated with cleft lip and palate, nasoethmoidal meningocele that conditions hypertelorism, and a pseudomacrostoma. Tridimensional technology was applied to plan the surgical intervention. It contributed to a better understanding of the relationships between the tumor and the adjacent structures. This optimized the surgical approach and outcome.

• 한국지반공학회논문집
• /
• 제37권12호
• /
• pp.117-125
• /
• 2021

시민의 안전을 위협하는 지반재해 중 하나인 지반함몰이 최근 도심지에서 빈번하게 보고되고 있다. 다양한 지반함몰 발생 메커니즘 중, 하수관 손상부를 통한 토사 유실이 서울시에서 발생하는 지반함몰의 주요원인으로 나타났다. 본 연구에서는 서울시 하수관 정보와 지반함몰이 발생한 위치 정보를 기반으로 머신러닝 기법 중 하나인 랜덤 포레스트 알고리즘을 이용하여 하수관 정보로부터 손상 하수관으로 유발되는 지반함몰의 발생 여부를 예측하는 모델을 학습하였다. 모델 성능 평가 결과, 본 연구에서 도출한 모델이 지반함몰을 상당히 훌륭하게 예측할 수 있는 것으로 나타났다. 또한, 입력변수로 사용한 하수관 정보 중 하수관 길이, 해발고도, 경사, 매립 심도, 하수관 순서로 지반함몰 발생 위험에 영향을 미치는 것을 확인하였다. 본 연구의 결과는 지반함몰 위험도 지도 작성, 지하공동 탐사 계획 수립 및 하수관 정비 사업 계획 수립의 기초 자료로 활용될 수 있을 것으로 기대된다.

• 한국지반환경공학회 논문집
• /
• 제23권8호
• /
• pp.17-22
• /
• 2022

공용 중에 연약지반의 침하로 발생된 교량 접속부의 단차 개선을 위해 도로관리기관에서는 지속적으로 덧씌우기를 실시하고 있다. 본 연구에서는 연약지반 내에 건설된 교량 9개소에 대해 접속부의 침하량을 추정하고자 1GHz 안테나를 차량에 탑재한 지표투과레이더 장비를 이용하였다. 포장 내부 조사가 가능한 지표투과레이더 기술로 아스팔트 도로에서 깊이 1m 수준까지 효과적으로 포장두께의 측정이 가능하였다. 노면 변형 조사결과와는 다르게, 9개 교량 접속부에서 측정된 포장두께 변화량은 최소 50mm에서 최대 600mm로 상당하였으며, 공동(空洞)의 발생 가능성도 높았다. 또한 각 교량 접속부의 부위별로는 증가된 포장두께의 차이가 50~250mm로 나타나 부등침하 위험이 존재하였다. 본 연구에서 지표투과레이더 결과에 근거하여 주행성 개선 및 침하부 유지관리 방안을 제시하였다.

• 한국전산구조공학회논문집
• /
• 제35권1호
• /
• pp.1-8
• /
• 2022

본 연구에서는 토양-탄체 간 분리 및 재접촉을 고려한 IFL 기반 침투해석 기술을 개발하고 이를 기존 문헌의 실험결과와 비교하는 연구를 수행했다. 탄체를 강체로 가정한 후, 토양 내로 침투 시 발생하는 구형공동팽창 현상을 고려함으로써 탄체의 궤적을 예측할 수 있다. 토양에 대한 저항함수는 Mohr-Coulomb 항복 모델을 활용했으며, 입사각 혹은 AOA에 따른 J-hook 현상을 모사할 수 있다. 기존 문헌에서의 실험결과(총 6회)와의 비교 결과, 수치해석으로부터 예측한 탄체의 침투 깊이는 실험대비 약 13.4%의 평균오차를 나타냈다. 일반적으로 탄체의 침투 경로를 예측하기 위해 유한요소법이 널리 활용된다. 하지만, 유한요소법 활용 시, 탄체의 모델링을 위해 많은 시간과 노력이 필요하며, 해석 수행을 위해 수 시간이 소요된다. 본 연구를 통해 개발한 모델을 활용할 시, 탄체의 치수 입력만 필요하며 해석 시간도 수 초 이내이다.

• 화약ㆍ발파
• /
• 제41권4호
• /
• pp.17-28
• /
• 2023

최근 연구시설 및 자원개발 등의 목적으로 지하공간 활용이 증가하고 있으며, 저심도 암반을 넘어 고심도 암반에 대한 개발이 증가하고 있다. 고심도 지하공간 개발은 높은 응력과 높은 온도 조건에서의 암반의 안정성을 고려해야 한다. 고심도의 경우 암반 구조와 불연속면의 상태 등이 안정성에 영향을 미칠 뿐만 아니라 지진 및 굴착을 위한 암반발파에 의한 지반진동 전파가 지하공동의 응력변화를 발생시켜 암반의 안정성에 영향을 미치게 된다. 발파공학 측면에서 지반진동을 예측하는 방법은 실측 데이터를 바탕으로 통계학적 회귀분석을 통한 경험적 회귀모형과 수치해석적 방법이 사용되고 있다. 본 연구에서는 단일공 발파에 의한 폭발압력 전파특성과 지반진동 전파특성에 대한 경험적 회귀모형을 획득하기 위하여 실험적 방법을 통해 연구를 수행하였다.

• 대한치과보철학회지
• /
• 제39권6호
• /
• pp.709-734
• /
• 2001

The aims of this experiment were to investigate the strain and temperature changes simultaneously within autopolymerzing acrylic resin specimens. A computerized data acquisition system with an electrical resistance strain gauge and a thermocouple was used over time periods up to 180 minutes. The overall strain kinetics, the effects of stress relaxation and additional heat supply during the polymerization were evaluated. Stone mold replicas with an inner butt-joint rectangular cavity ($40.0{\times}25.0mm$, 5.0mm in depth) were duplicated from a brass master mold. A strain gauge (AE-11-S50N-120-EC, CAS Inc., Korea) and a thermocouple were installed within the cavity, which had been connected to a personal computer and a precision signal conditioning amplifier (DA1600 Dynamic Strain Amplifier, CAS Inc., Korea) so that real-time recordings of both polymerization-induced strain and temperature changes were performed. After each of fresh resin mixture was poured into the mold replica, data recording was done up to 180 minutes with three-second interval. Each of two poly(methyl methacrylate) products (Duralay, Vertex) and a vinyl ethyl methacrylate product (Snap) was examined repeatedly ten times. Additionally, removal procedures were done after 15, 30 and 60 minutes from the start of mixing to evaluate the effect of stress relaxation after deflasking. Six specimens for each of nine conditions were examined. After removal from the mold, the specimen continued bench-curing up to 180 minutes. Using a waterbath (Hanau Junior Curing Unit, Model No.76-0, Teledyne Hanau, New York, U.S.A.) with its temperature control maintained at $50^{\circ}C$, heat-soaking procedures with two different durations (15 and 45 minutes) were done to evaluate the effect of additional heat supply on the strain and temperature changes within the specimen during the polymerization. Five specimens for each of six conditions were examined. Within the parameters of this study the following results were drawn: 1. The mean shrinkage strains reached $-3095{\mu}{\epsilon},\;-1796{\mu}{\epsilon}$ and $-2959{\mu}{\epsilon}$ for Duralay, Snap and Vertex, respectively. The mean maximum temperature rise reached $56.7^{\circ}C,\;41.3^{\circ}C$ and $56.1^{\circ}C$ for Duralay, Snap, and Vertex, respectively. A vinyl ethyl methacrylate product (Snap) showed significantly less polymerization shrinkage strain (p<0.01) and significantly lower maximum temperature rise (p<0.01) than the other two poly(methyl methacrylate) products (Duralay, Vertex). 2. Mean maximum shrinkage rate for each resin was calculated to $-31.8{\mu}{\epsilon}/sec,\;-15.9{\mu}{\epsilon}/sec$ and $-31.8{\mu}{\epsilon}/sec$ for Duralay, Snap and Vertex, respectively. Snap showed significantly lower maximum shrinkage rate than Duralay and Vertex (p<0.01). 3. From the second experiment, some expansion was observed immediately after removal of specimen from the mold, and the amount of expansion increased as the removal time was delayed. For each removal time, Snap showed significantly less strain changes than the other two poly(methyl methacrylate) products (p<0.05). 4. During the external heat supply for the resins, higher maximum temperature rises were found. Meanwhile, the maximum shrinkage rates were not different from those of room temperature polymerizations. 5. From the third experiment, the external heat supply for the resins during polymerization could temporarily decrease or even reverse shrinkage strains of each material. But, shrinkage re-occurred in the linear nature after completion of heat supply. 6. Linear thermal expansion coefficients obtained from the end of heat supply continuing for an additional 5 minutes, showed that Snap exhibited significantly lower values than the other two poly(methyl methacrylate) products (p<0.01). Moreover, little difference was found between the mean linear thermal expansion coefficients obtained from two different heating durations (p>0.05).

• Restorative Dentistry and Endodontics
• /
• 제21권1호
• /
• pp.321-338
• /
• 1996

The purpose of this study was to evaluate the effect of moistening and air-drying of acid conditioned dentin and enamel on the marginal microleakage. In this study, Class V cavity were prepared on both buccal and lingual surface of sixty extracted human premolars with cementum margin. These specimens were randomly devided into three groups and three dentin adhesives(Scotchbond Multi-Purpose, All bond 2, Prisma Universal Bond 3) were applied to each group. The specimens in each group were subdevided into four groups (Wet/primed, Dry/primed, Wet/not primed, Dry/not primed) and the etched dentin and enamel surface were treated these four surface treatments prior to the placement of a bonding agent or adhesive. Wet/primed group was simply blot-dried with a damp facial tissue before primer placement ; Dry/primed group was air dried for 30 seconds before the placement of a primer ; Wet/not primed group and Dry/not primed group were not primed after blot dried and air dried for 30 seconds each group. The bonding agent and composite resin were applied for each group. All specimens were exposed to 500 cycle of thermal stress. Specimens were placed in a silver nitrate solution and then sectioned buccolingually through the center of the restoration. The dye penetrations of the specimens were observed with a stereo microscope. The statistical test were applied to the results using a one way analysis variance (ANOVA) and Duncan's multiple range test. The aspects of silver ion penetration into the resin/dentin interface were examined under scanning electron microscopy. The results were as follows. 1. In all groups, the enamel margin showed significantly lower leakage value than the cementum margin (p<0.05). 2. Regardless of various surface treatment and dentin adhesives, there was no significant difference at the enamel margins (p>0.05). 3. At the dentin margins, the leakage values of Dry/not primed group showed significantly higher than that of the other groups (p<0.05). The leakage values of Wet/primed group showed significantly lower than that of the other groups, but, there was no significant difference between Wet group and Dry group. 4. There was no significantly difference between the dentin adhesives regarding the surface treatments in all groups(p>0.05). 5. On the backscatterd scanning electron microscopy observation, the penetration of the silver ion occured at the bonding resin/dentin interface. In the Wet/primed group, resindentin hybrid zone and resin penetration into the dentin was observed. The resin tags were compactively formed to a thickness of $3\sim4{\mu}m$ at the upper part of dentinal tubules. In the Dry/primed group, the thickness of the hybrid zone and the diameter, depth of the resin tags diminished. In the Non-primed groups, the hybrid zone was not identified and few resin tag was observed. There was the gap formation in the resin/dentin interface.