• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1601-1604
• /
• 2003

This paper describes a split operation for generation of core and cavity plates of an injection mold for a pseudo-solid model of a plastic part. Here, a pseudo-solid model means a sheet model that looks like a solid model. but whose boundary is not closed. When a solid model created in a different CAD system is imported through standard data exchange format, a pseudo-solid model is created in most cases as tolerance or some other problems make sewing operation failed. As most existing mold design system based on solid modeling kernels require a complete part solid model, mold designers have to do time-consuming healing operations to convert a pseudo-solid to solid. The essential capability of mold design system is the split operation for generation of core and cavity plates. Thus. we developed a split operation for pseudo-solid part model to eliminate or reduce healing preprocessing for mold design.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.407-408
• /
• 2006

Almost all injection molds have multi-cavity, which are designed with geometrically balanced runner system in order to made filling balance between cavity to cavity during injection molding. However, filling imbalance has been existed in the geometrically balanced runner system. In this study, we made an experiment and surveyed that are filling balanced variation according to molding condition with thermoplastic vulcanizate (TPV). Also, we conducted experiments in order to know the influence of filling balance for runner core pin (RC pin).

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.268-271
• /
• 2008

If a reactor vessel is failed to retain a molten corium in a postulated severe accident, the molten corium is released outside the reactor vessel into a reactor cavity. The molten corium would attack the concrete wall and basemat of the reactor cavity, which may lead to inevitable concrete decompositions and possible radiological releases. In the OECD/MCCI project, a series of tests were performed to secure the data for cooling the molten corium spread out at the reactor cavity and for the long-term CCI (Core Concrete Interaction). Also, a MCCI (Molten Core Concrete Interaction) analysis code, CORQUENCH was upgraded at Argonne National Laboratory with embedding the new models developed for the tests. This paper deals with analyses of MCCI at plant scale under the conditions of top flooding using the upgraded CORQUENCH code. The modeling approach is briefly summarized first, followed by presentation of a validation calculation that illustrates the predicative capability of the modeling tool. With this background in place, the model is then used to carry out a parametric set of scoping calculations that define approximate coolability envelopes for the LCS (Limestone Common Sand) concrete that has been evaluated in the OECD/MCCI project.

• Design & Manufacturing
• /
• 제9권3호
• /
• pp.34-40
• /
• 2015

In the study, Three-dimensional drawing parts for conformal cooling circuit cavity & core and their 3D Metal parts using DMLS(Direct MetalLaser Sintering) and NC integrated machining center were showned. For conformal cooling circuit cavity and core parts, I discussed its practicality to DMLS multiple machinins process introducing general manufacturing process and comparing with them.

• International Journal of Fluid Machinery and Systems
• /
• 제5권2호
• /
• pp.49-59
• /
• 2012

The present study is devoted to the influence of a superposed radial inflow in a rotor-stator cavity with a peripheral opening. The flow regime is turbulent, the two boundary layers being separated by a core region. An original theoretical solution is obtained for the core region, explaining the reason why a weak radial inflow has no major influence near the periphery of the cavity but strongly affects the flow behavior near the axis. The validity of the theory is tested with the help of a new set of experimental data including the radial and tangential mean velocity components, as well as three components of the Reynolds stress tensor measured by hot-wire anemometry. The theoretical results are also in good agreement with numerical results obtained with the Fluent code and experimental data from the literature.

• 마이크로전자및패키징학회지
• /
• 제27권1호
• /
• pp.67-73
• /
• 2020

본 논문에서는 FEM(유한요소) 기법을 사용하여 FCCSP용 임베디드 PCB의 캐비티 구조와 프리프레그 재료의 종류에 따라 PCB에서 발생한 warpage와 von Mises 응력 해석을 수행하였다. 유한요소 해석에는 1/2 substrate 모델과 정적해석이 적용되었다. warpage 해석 결과에 의하면 칩이 실장되는 캐비티와 칩의 간격이 증가할수록 warpage가 증가하였고, 탄성계수와 열팽창계수가 높은 프리프레그 재료를 적용했을 때 warpage가 증가하였다. 응력의 해석결과에 따르면 칩이 실장되는 캐비티와 칩의 간격의 영향은 프리프레그 재료에 따라 다르게 나타났다. 즉 열팽창계수가 코어재료보다 월등히 높은 재료를 적용했을 때 칩이 실장되는 캐비티와 칩의 간격이 증가할수록 응력이 증가하였고, 열팽창계수가 코어재료보다 낮은 프리프레그를 적용하면 응력이 감소하였다. 이와 같은 결과는 신뢰성 관점에서 실장된 칩이 실장되는 캐비티의 구조와 프리프레그 재료간 상관관계가 있음을 시사하고 있다.

• 한국산학기술학회논문지
• /
• 제8권6호
• /
• pp.1313-1318
• /
• 2007

다양한 곡률반경의 연속에 의하여 살 두께 차가 큰 jar50ml의 성형가공시간 단축과 품질향상을 위하여 금형을 급속 냉각시키면 void, 후로우 및 변형 등의 불량이 발생하게 된다. 제품내측과 외측의 온도조절을 충분히 할 수 있는 캐비티부와 코아부에 나선형 냉각회로 구조와 가열과 냉각을 자동 제어할 수 있는 시스템을 Jar금형에 적용함으로 우수한 품질과 생산성향상의 효과를 얻을 수 있다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1999년도 추계학술발표회요약집
• /
• pp.195-195
• /
• 1999

• 한국전산유체공학회지
• /
• 제9권1호
• /
• pp.1-9
• /
• 2004

Large eddy simulation is used to investigate the compressible flow over a cavity with high aspect ratio. The sub-grid scale stresses are modeled using the dynamic model. The compressible Navier-Stokes equations are solved with the sixth order accurate compact finite difference scheme in the space and the 4th order Runge-Kutta scheme in the time. The buffer Bone techniques are used for non-reflecting boundary conditions. The results show the shear layer oscillation over the cavity. The votical disturbances, the roll-up of vorticity, and impingement and scattering of vorticity at the downstream cavity edge can be seen in the shear layer. Several peaks for the resonant frequencies are found in the spectra of the vertical velocity at the center-line. The most energetic Peak near the downstream edge is different from that at the center part of the cavity The pressure has its minimum value in the vortex core inside the cavity, and becomes very high at the downstream face of the cavity. The variation of the model coefficient predicted by the dynamic model is quite large between 0 and 0.3. The model coefficient increases in the stream-wise evolution of the shear layer and sharply decreases near the wall due to the wall effect.

• 한국추진공학회지
• /
• 제7권1호
• /
• pp.40-48
• /
• 2003

큰에디모사기법을 사용하여 압축성 공동유동을 수치해석하였다. Dynamic 모델을 사용하여 모델상수를 구했으며 공간으로 6차 유한차분기법, 시간에 대하여 4차 Runge-Kutta 수치기법을 사용하였다. 공동 주위의 유동을 보면 중심선을 따른 전단유동의 발달, 에디의 발생과 소멸 현상을 잘 볼 수 있었다. 유동결과로부터 예측된 공진 주파수는 Rossiter의 실험식 결과와 비교적 잘 일치하였다. 평균 유선의 분포는 공동의 중심선을 따라서 평행하였으며 공동 내부 후반부에서 압력이 급격히 감소됨을 알 수 있었다.