• 한국광학회지
• /
• 제22권4호
• /
• pp.179-183
• /
• 2011

근적외선 대역에서 동작 가능한 가변파장레이저 구현을 위하여 브래그 격자와 반도체 광증폭기로 구성된 외부 공진기 형태의 레이저를 제작하였다. 폴리머 광도파로는 굴절률이 1.462, 1.435 인 ZPU 폴리머를 이용하여 제작되었다. 근적외선 파장에서 반사를 일으키는 브래그 격자의 제작을 위해서는 주기가 875 nm 로서 비교적 크고 제작이 손쉬운 3차 브래그 격자를 이용하였다. 폴리머 광도파로 브래그 반사기를 이용하여 제작된 근적외선 외부공진 레이저는 850 nm 파장에서 0 dBm의 출력 파워와 0.2 nm의 20-dB bandwidth, 40 dB 이상의 Side Mode Suppression Ratio을 가지는 단일 모드 레이저 특성을 보였다.

• 한국광물학회지
• /
• 제23권1호
• /
• pp.39-50
• /
• 2010

제주도 응회구 및 응회환과 지하 서귀포층 화산쇄설암에서 화산유리 변질산물로서 불석광물들이 생성되었다. X선회절분석과 전자현미화학분석으로 확인된 주요 불석광물은 필립사이트와 아날심이다. 아날심과 필립사이트의 Si/(Si+Al) 원자비는 모물질인 현무암 유리와 유사하다. 아날심의 화학조성은 매우 단순하지만, 필립사이트는 구조 내 공극 양이온들의 비율이 매우 다양하다. 아날심이 산출되는 당산봉 및 용머리 응회암에서는 Na, 그리고 시추코아에서는 K와 Ca가 필립사이트의 주요 공극양이온이었다. 변질조직의 주사전자현미경 관찰에 의하면 필립사이트가 먼저 침전되고, 후기에 아날심이 충전하였다. 제주도의 여러 응회환/구 중에서도 층서적으로 가장 오래된 당산봉과 용머리 응회암에서 지표수와의 오랜 반응으로 불석광물들이 다량 생성되었고 비교적 연대가 젊은 다른 응회환/구에는 볼석이 거의 생성되지 않았다.

• 지질공학
• /
• 제24권4호
• /
• pp.525-534
• /
• 2014

폐광 부지에서 발생하는 대표적인 환경 문제는 산성으로 오염된 지표수와 지하수, 적재된 폐광석 및 광미, 채굴 활동으로 야기된 지반침하 현상을 들 수 있다. 이 논문은 광해 유형에 따라 재해 및 오염영역을 효율적으로 탐지했던 지구물리탐사방법들을 고찰하는데 있다. 시험 자료로서 토양오염, 산성광산배수, 지반침하, 인공차수막 파손 및 광미/폐광석 적치장을 각각 대표하는 네 개의 폐광 부지를 선택하였다. 자료 검증을 위해 물리탐사자료는 자료의 유형에 따라 시추자료(코어 샘플, 물리검층, 토모그래피 등)와 물 자료(수소이온농도, 전기전도도, 중금속원소 등)와 비교하였다. 토양오염 탐지에 있어서 낮은 전기비저항 이상대는 특히 구리, 납, 아연의 중금속 농도가 높은 지역과 부합된다. 산성광산배수의 유동 경로는 자연전위 곡선에서 음의 전위 이상대, 전기비저항자료에서의 저비저항 이상대, 지하레이더 자료에서의 얕은 투과깊이 영역으로 탐지되었다. 채굴적은 전기비저항 단면에서의 저비저항 이상대, 탄성파토모그래피에서 낮은 속도 영역, 물리검층곡선의 복합해석으로 특징되며, 정확한 위치는 코어자료와 시추공영상자료에서 잘 확인되었다. 침출수 유동을 차단하기 위해 설치된 인공차수막의 파손 구간은 전기비저항 자료에서의 국부적인 이상대로 정확히 탐지되며 매립된 폐석더미는 고비저항 이상대와 저속도 이상대로 특징된다.

• 대한소아치과학회지
• /
• 제46권1호
• /
• pp.111-118
• /
• 2019

구치 근관 치료의 임상적 성공은 근관 치료 후 수복에 의해 결정된다. 다양한 방법들이 근관 치료된 구치를 수복하기 위해 제안되고 있다. 소아청소년치과학 영역에서 근관 치료가 필요한 맹출 진행 중인 영구 구치의 전통적인 포스트 코어 및 전장관 수복은 어려움이 많고 과도한 치질 삭제를 유발한다. 치수강을 통한 적절한 유지력이 제공된다면 엔도크라운(Endocrown)은 보존적이고 심미적인 대안이 될 수 있다. 치아 형성은 크라운-코어 일체형의 수복물을 구성하기 위해 치은연과 같은 높이의 버트 조인트(butt-joint) 변연과 치수강 내부 전체의 유지 와동으로 이루어진다. 이 증례 보고는 광범위하게 손상된 부분 맹출된 제1대구치의 엔도크라운을 통한 심미적이고 보존적인 수복의 결과를 기술하고 있다.

• 천문학회지
• /
• 제37권5호
• /
• pp.381-385
• /
• 2004

Similarly to other cluster of galaxies previously classified as cooling flow systems, the Chandra observation of MKW 3s reveals that this object has a complex X-ray structure hosting both a X-ray cavity and a X-ray filament. Unlike the other clusters, however, the temperature map of the core of MKW 3s shows the presence of extended regions of gas heated above the radially averaged gas temperature at any radius. As the cluster does not show evidences for ongoing major mergers Mazzotta et al. suggest a connection between the heated gas and the activity of the central AGN. Nevertheless, due to the lack of high quality radio maps, this interpretation was controversial. In this paper we present the results of two new radio observations of MKW 3s at 1.28 GHz and 604 MHz obtained at the GMRT. Together with the Chandra observation and a separate VLA observation at 327 MHz from Young, we show unequivocal evidences for a close connection between the heated gas region and the AGN activity and we briefly summarize possible implications.

• 한국정밀공학회지
• /
• 제20권5호
• /
• pp.225-231
• /
• 2003

The injection molding is a traditional manufacturing method that can make plastic parts by just one time in mold. Therefore, the injection molding has become one of a manufacturing method, which is widely applied in a producing of plastic products. Nowadays, to use of plastic parts has increased and plastic product-model using term has been shorten. By these reasons, using term of a injection mold has fast been reduced. These produced molds will be disused and leaved in a storage after a regular term to use it. These leaved molds are sometime sold as scrap iron. But, these molds have lots parts for recycling except special parts for example, cavities, cores and eject pins, etc. In this research, we investigated when the cavity and core of in injection mold would be changed, the injection mold could be recycled. We suggested the structures and standardizations for recycling of a moldbase. We also developed a program in which can be used when the recycling moldbase design in the Auto-CAD with the recycling standards. We called this program as the Recy-Mold. For the availability of the program and moldbase structure fur the recycling standards, we experimented a used mold for automobile lens, which was remanufactured by the recycling standard. The results of this test showed feasibility for the recycling mold.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권3호
• /
• pp.45-50
• /
• 2005

This paper proposed an efficient manufacturing system using the OMM (on-machine measurement) system. The OMM system is software-based 3D modeler for inspection on machine, and it is interfaced with machine tools via RS232C. The software is composed of two inspection modules; one is touch probe operating module, and the other is laser displacement sensor operating module. The module for touch probe needs the inspection feature extracted from CAD data. The touch probe moves to workpiece by three operating modes as follows: manual, general and automatic mode. The operating module of the laser displacement sensor is used to inspect profiles and very small holes. An advantage of this inspection method is the ability to execute on-line inspection during machining or afterward. The efficiency of proposed system which can predict and define the machining errors of each process was verified, so the developed system was applied to inspect a mold-base (cavity, core).

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1328-1339
• /
• 2008

For a commonly used piezocone with a shoulder filter element, dilatory dissipation behavior, which shows an initial temporary increase in pore pressure, has been observed in overconsolidated cohesive soils. However, there is no appropriate way to estimate a consolidation parameter from a dilatory dissipation curve because currently available interpretation methods were developed based on the monotonic decrease of the excess pore pressure. In this study, the interpretation method for evaluation of coefficient of consolidation from a dilatory dissipation result of piezocone test was developed by performing the finite difference analysis on the dissipation after cone penetration. The distribution of the initial excess pore pressure induced by cone penetration, which is the core of the analysis, was estimated from the empirical modification of a solution proposed by cavity expansion theory and critical state concept. And the proposed interpretation method was applied to the field piezocone data and the results were compared to those obtained from laboratory tests. Its reliability was confirmed by the insignificant difference between the values of coefficient of consolidation from piezocone tests and laboratory consolidation tests.

• 한국기계가공학회지
• /
• 제16권5호
• /
• pp.105-112
• /
• 2017

In this study, plastics were deformed after molding due to the characteristics of the material. The Taguchi experimental design method was utilized to find the molding conditions that minimized deformation of the plastic bezel to be assembled in an automotive steering wheel. The injection molding conditions applied to the experimental design method are the melt temperature, cavity plate coolant temperature, core plate coolant temperature, and cooling time. Each condition was divided into five levels, and a total of 25 experiments were planned. However, instead of performing 25 actual molding experiments, the injection molding analysis was performed using the Moldflow program, and the deformation values for each molding analysis were obtained. The optimal molding conditions were obtained from these deformation values. The actual injection molding experiment using optimal molding conditions was compared with the deformation amount of the current molded product. The deformation was measured using a precise 3D scanner. The deformation amount of the molded product under optimal molding conditions was 16.1% lower than the deformation amount of the current molded product.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.63-70
• /
• 2002

In tunnel construction, the information on the rock quality and the location of fault or fracture are crucial for economical design of support pattern and for safe construction of the tunnel. The grade of rock is commonly estimated through the observation with the naked eye of recovered cores in drilling or from physical parameters obtained by their laboratory test. Since drilling cost is quite expensive and terrains of planned sites for tunnel construction are rough in many cases, however, only limited information could be provided by core drilling Electrical resistivity and EM surveys may be a clue to get over this difficulty. Thus we have investigated electrical resistivity and EM field data providing regional Information of the rock Quality and delineating fault and fracture over a rough terrain. In this paper, we present some case histories using electrical resistivity and EM survey for the site investigation of tunnel construction. Through electrical resistivity and EM survey, the range and depth of coal seam was clearly estimated, cavities were detected in limestone area, and weak zones such as joint, fault and fracture have been delineated.