• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.1
• /
• pp.47-52
• /
• 1999

Comparative effects of phosphine fumigation and gamma irradiation were evaluated on the qualities of white ginseng prepacked in a commercial laminated film in terms of water absorption, Hunter color parameters(L, a, b) and organoleptic properties(overall color/appearance, flavor) during 6 months of storage at ambient(20oC, 70% RH) and accelerated(40oC, 90% RH) conditions. Moisture content of packed white ginseng(initial 8.44%) linearly increased with storage period, thereby reaching to about 10% (r=0.9966) in ambient and more than 15%(r=0.9886) in accelerated conditions, respectively, at the 6th month of storage. The storage at severe conditions resulted in remarkable changes in Hunter's color values, decrease in whiteness(L) and increase in redness(a) and yellowness(b), while both treatments, phosphine and irradiation less than 5kGy, did not cause any significant changes in color parameters. Phosphine fumigation was shown detrimental to overall flavor of white ginseng(p<0.01), however or ganoleptic qualities of stored samples were effectively maintained by irradiation less than 5kGy(p< 0.05). As the index on the guality of white ginseng stored at severe conditions its organoleptic quality was highly correlated with moisture content(r= 0.9777) and Hunter color values(over 0.9), suggesting the critical values of 15.5% moisture and 72.56, 7.15, 21.45 in Hunter's L, a, b values, respectively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.3
• /
• pp.1011-1025
• /
• 2014

A demosaicing method for a Bayer-like W-RGB color filter array (CFA) is proposed. When reproducing images from a W-RGB CFA, conventional color separation methods for W-RGB CFA are likely to cause blurring near the edges due to rough averaging using a color ratio of neighboring pixels. Moreover, these methods cannot be applied to real-life digital cameras with W-RGB CFA because the methods were proposed under an ideal situation, W=R+G+B, not a real-life situation, $W{\neq}R+G+B$. To improve edge performance, we propose a method of constant color difference assumption with inversed weight, which uses information from all edge directions for interpolating all missing color channels. The proposed method calculates the correlation between W, R, G, and B to enable its application to real-life digital cameras with W-RGB CFA. Simulations were performed to evaluate the proposed method using images captured from a real-life digital camera with W-RGB CFA. Simulation results shows that we can demosaic by using the proposed algorithm compared with the conventional one in about +34.79% SNR, +11.43% PSNR, +1.54% SSIM and 14.02% S-CIELAB error. Thus, the proposed method demosaics better than the conventional methods.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.10
• /
• pp.1567-1571
• /
• 2006

Synthetic color additives approved for general food use are sixteen in European Union, seven in U. S. A. and twelve in Japan. Twelve food dyes were examined for their inhibitory potency against human protein tyrosine phosphatases (PTPases). Half of the food colorants inhibited PTPases significantly and three of them were potent inhibitors with low micromolar IC50 values. Also examined were the synthetic dyes structurally similar but not allowed in food. Some of them were potent inhibitors of PTPases. Considering the importance of PTPases in cellular signal transduction, inhibition of PTPases by food colorants might cause harmful effects in human health.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.2
• /
• pp.139-146
• /
• 1998

The characteristics of color and COD removal for dyeing-wastewater using electrochemical reaction were investigated. >From the result, the removal efficiency of color and COD were increased with increase of temperature, decrease of electrode distance, increase of electrolyte concentration and increase of potential and these were obtained above 99%, above 75% within 30 min, individually. Cause of higher COD removal efficiency, it is more suitable that dyeing-wastewater is treated by electrolytic treatment prior to biological treatment. It is concluded that the electrolytic treatment of dyeing-wastewater can be used as the effective and economical method in practical treatment.

• Smart Media Journal
• /
• v.2 no.2
• /
• pp.8-13
• /
• 2013

Nowadays, the saliency region detection has become a popular research topic because of its uses for many applications like object recognition and object segmentation. Some of recent methods apply color distinctiveness based on an analysis of statistics of color image derivatives in order to boosting color saliency can produce the good saliency maps. However, if the salient regions comprise more than half the pixels of the image or the background is complex, it may cause bad results. In this paper, we introduce the method to handle these problems by using maximum symmetric surround. The results show that our method outperforms the previous algorithms. We also show the segmentation results by using Otsu's method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1811-1816
• /
• 2012

Black marker cause unnatural problems between the existing various contents and marker. To solve this problem, we tested frequency of 3D objects according to the various colors and color placement. Based on this, infant's learning content system based NyARToolkit for the mobile-based augmented reality was implemented. By insert to color marker, We are solved the unnatural problems in the Implemented system. and infant can study seamlessly because concentration increases by the familiar character on the markers.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.3
• /
• pp.149-159
• /
• 2008

We present new methods which transfer the color style of a source image into an arbitrary given reference image. Misidentification problem of color cause wrong indexing in low saturation. Therefore, the proposed method do indexing after Image separating chromatic and achromatic color from saturation. The proposed method is composed of the following four steps : In the first step, Image separate chromatic and achromatic color from saturation using threshold. In the second step, image of separation do indexing using cylindrical metric. In the third step, the number and positional dispersion of pixel decide the order of priority for each index color. And average and standard deviation of each index color be calculated. In the final step, color be transferred in Lab color space, and post processing to removal noise and pseudo-contour. Experimental results show that the proposed method is effective on indexing and color transfer.

• Journal of the Korea Furniture Society
• /
• v.23 no.2
• /
• pp.152-162
• /
• 2012

The color changing of the wood surface was tested by accelerated weathering test that can simulate the outdoor condition with short period. In early parts of accelerated weathering test, weight and volume of specimen all were increased due to the moisture evaporation by its high temperature and illumination level, but weight and volume of specimen all were decreased from middle parts to last. However, significancy showed between control group and accelerated weathering test group in terms of weight and volume. According to the results of color-difference meter, in the early parts of the accelerated weathering test lightness, redness and yellowness all showed a clear increasing or decreasing trend. However, after three weeks all values were almost never change. Until the early parts of the test, lightness was decreased and there was not a considerable change after three weeks in the test. Redness showed a some change in early parts of the test, but this also showed not great change after middle parts of the test as like lightness. Yellowness also showed same pattern. These results could be verified through the visual inspection. As like weight and volume, significancy showed between control group and accelerated weathering test group in terms of color-difference test. In all accelerated weathering test group, color-differences of after test was lower than that of before test. To correctly analyze this cause, more additional research will be need on each of temperature, humidity and illumination factors.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.28 no.2
• /
• pp.69-85
• /
• 2010

Currently, environmental contaminants that can cause Aromatic types of hydrocarbons, less than 1% made of Aromatic Free kind of used products, soybean oil products with linseed oil with the products, rice products using a wide range of environmentally ecological ink since 2000 is released quickly. All materials used in printed material, if the green is the best way to print the composite materials in industrial applications, because each process on the print quality and productivity, there can be many differences in this experiment because it accounts for a large proportion in the print general ink in the ink section and the International color standards(ISO2846-1:2006) certified ecological ink were compared. Therefore, in this paper has the ink released from the same company, each common general ink and ecological ink in the same condition which results were focused on whether the emerging international color standard(ISO 2846-1:2006) recognized for environmentally ecological ink printed color reproduction of the actual offset(color reproduction) how conformity to ISO 12647-2 standard color on the basis of the offset would check Color Reproduction. Based on the results of the experiments of this study, given the ecological ink coated paper, uncoated paper both color difference and the gamut of the ISO 12647-2 standard is suitable for ecological ink, the ink's color gamut reproduction, even more than existing international standards, there is no confirmed that the correct color reproduction possible. Using environmentally ecological ink industries is expected to respond to environmental policy.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.62.1-62.1
• /
• 2014

Metallicity distribution of globular clusters (GCs) provides an important clue for star formation history of their host galaxy. With an assumption that GCs are generally old, GC colors have been used as a proxy of GC metallicities. Bimodal GC color distributions observed in most large galaxies have, for decades, been interpreted as bimodal metallicity distributions, indicating the presence of two populations within a galaxy. However, the conventional view has been challenged by a new theory that non-linear GC color-metallicity relations (CMRs) can cause a bimodal color distribution even from a single-peaked metallicity distribution. Using the photometric and spectroscopic data of NGC 5128 GCs in combination with stellar population simulation models, we examine the effect of non-linearity in GC CMRs on the transformation of GC color distributions into metallicity distributions. Although, in some colors, offsets are present between observations and models in the CMRs, their overall shape agrees well for various colors. After the offsets are corrected, the observed spectroscopic metallicity distribution is well reproduced via modeled CMRs from various color distributions having different morphologies. On the other hand, the linearly converted metallicity distributions from GC colors show a significant discrepancy with the observed spectroscopic metallicity distribution. We discuss the implications of our results.