• Journal of the Korean Home Economics Association
• /
• v.42 no.4
• /
• pp.119-125
• /
• 2004

In this paper, the effect of the volcanic ash dyed on cotton knitted fabrics was studied in various ways. A cationic agent was used to improve the depth of color of the fabric in the dyeing process. K/S values of dyed fabrics were measured to examine the dyeing properties. Cationic agent pretreatment, followed by dyeing with volcanic ash, was tested. In the dyeing experiment, the effects of a wide range of parameters such as the concentration of cationic agent, treatment time, treatment temperature and treatment pH of the dyebath were studied. Experimental results showed that the pretreatment with cationic agent improved the dyeing properties of cotton knitted fabrics with volcanic ash. At this point, concentration of cationic agent was 4%(on weight of fabric), treatment time was 40minutes, treatment temperature was 80 C and treatment pH of the dyebath was a neutral condition.

• Textile Coloration and Finishing
• /
• v.9 no.1
• /
• pp.33-43
• /
• 1997

This study was carried out to investigate increasing the neutral substantivity of anionic dyes for cationic-modified cotton fabric treatied with cationic agent. In the present study 3-chloro-2-hydroxypropyltrimethyl ammonium chloride for reactive cationic agent was produced by reaction of epichlorohydrine with trimethylamine hydrochloride. 3-chloro-2-hydroxypropyltrimethylammonium chloride was converted in an aqueous solution of sodium hydroxide into glycidyltrimethylammonium chloride. By treating with this epoxy reagent the hydroxyl groups of cotton fabric was modified to trimethylammonium group through ether linkage. The introduction of new cationic sites into cotton fabric by pretreating with cationic agent improves the substantivity of anionic dyes with the cotton in dyebath. Dyeablity of the modified cotton fabric for direct and reactive dyes was much improved in a non-electrolytic or a little electrolytic dyebath and was proportional to the concentration of cationic agent.

• Textile Coloration and Finishing
• /
• v.15 no.5
• /
• pp.294-300
• /
• 2003

The anionic agent containing dichloro-s-triazinyl reactive group was synthesized and applied to the cotton fabrics to introduce covalent bonds. This attempt was expected to improve the affinities of cationic compounds, such as cationic dyes, chitosan, quaternary ammonium antimicrobial agents and metal ions, by the electrostatic attractive force. As expected, the anionic agent was reacted with cotton fabrics at room temperature. In order to examine the adsorptivity of the cationic compounds on to the anionized cotton fabrics, firstly a cationic dye(C. I. Basic Violet 7) was applied. The color strength of the dyeing of anioized cotton fabric was highly increased comparing to that of untreated fabric.

• Textile Coloration and Finishing
• /
• v.24 no.1
• /
• pp.1-7
• /
• 2012

Dyeing and fastness characteristics of 100% meta-aramid fiber were investigated with cationic dyes and swelling agents under various dyeing conditions such as dyeing temperature and pH of dye bath. Dye exhaustion started at around $80^{\circ}C$ and settled down at $130^{\circ}C$. Among swelling agents used, N-methyl formanilide showed comparatively higher K/S values comparing to 1-phenoxypropan-2-ol. Under weak acidic conditions in the range pH 5 to 7, the exhaustion of cationic dyes could be enhanced leading to higher adsorption and stability of colorimetric property. Wash and rubbing fastness were generally good but low light fastness found can be attributable to the poor photo-stability of the cationic dyes.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.3
• /
• pp.18-23
• /
• 2015

In this study, the effects of cationic fatty acid bulky promotor on the properties of BCTMP (bleached chemithermomechnical pulp) handsheet including bulk and strength were elucidated. As results, it was observed that the bulk of BCTMP handsheet increased with the increases of the concentration of cationic fatty acid bulky agent, while mechanical properties such as tensile strength and burst strength decreased. The opacity of BCTMP handsheet also increased with the increases of the concentration of cationic fatty acid bulky agent, while brightness was almost not changed. The effectiveness of bulky agent with SwBCTMP (softwood) was higher than that with HwBCTMP (hardwood). Compared with previous research on the effect of bulky agent on BKP handsheet, the bulk increase of BCTMP handsheet was greater compared to that of BKP handsheet. However, the reduction of mechanical property in BCTMP handsheet was lower than that of BKP handsheet.

• Textile Coloration and Finishing
• /
• v.19 no.1 s.92
• /
• pp.12-16
• /
• 2007

Exhaustion increase using cationic dyes on polyamide fibers are not easy work due to the limited amounts of the functional end groups(-COOH) in the substrates. Therefore, to enhance dye exhaustion, polyamide fibers are required to be modified onto desired surface properties of the fibers using anionic bridging agent. In this study, synthetic tanning agent for pre-treatment finishing and cationic dye(berberine chloride) for dyeing of polyamide fibers were used. For surface modification, polyamide fibers were pre-treated with synthetic tanning agent at various concentrations and temperatures. The increased concentration and temperatures of synthetic tanning agents had resulted in exhaustion increase. The modified polyamide substrates skewed increased cationic dyeing exhaustions and the corresponding dyeing results from treated samples represented higher exhaustion properties than those of non-treated counterpart. The increased dyeing effects of cationic dye can be attributed to the supplied ionic interaction and electrostatic attraction sites on the surface of polyamide substrates.

• Textile Coloration and Finishing
• /
• v.27 no.4
• /
• pp.301-308
• /
• 2015

This study optimizes dyeing conditions for polyamide-imide fabric using cationic dyes. Dyeing and fastness characteristics of polyamide-imide fabric were investigated with three cationic dyes and 2-hydroxyacetophenone as a swelling agent under various dyeing conditions such as dye and swelling agent concentrations, dyeing temperature and time, pH of dye bath. The dyeing properties were evaluated in terms of dye exhaustion, K/S value and color fastness. The optimized dyeing temperature and time were $130^{\circ}C$ for 90 min for the dyes. Under weak acidic conditions in the range pH 5 to 7, the exhaustion of cationic dyes could be enhanced leading to higher adsorption. Wash and rubbing fastness properties were generally good, while light fastness was slightly low, which can be attributed to the poor photo-stability of the cationic dyes.

• Textile Coloration and Finishing
• /
• v.7 no.2
• /
• pp.70-76
• /
• 1995

The polyepichlorohydrine(poly(ECH)) was prepared by the condensation polymerization of epichlorohydrine. The cationic agent was prepared from poly(ECH) by amination of poly(ECH) with dimethyleneamine. Pretreatment of cellulosic fabric with the poly(ECH)amine produced a modified fabrics that could be dyed under neutral condition with reactive dye using small amount of the salt. Colour yield of cellulosic fabric were increased by increasing salt concentraction. cationic agent concentration. The optimum condition for colour yield was the concentration of cationic agent 5%(o.w.f), that of NaCl 4g/l, and that of $Na_{2}CO_{3}$5g/l. The dyeing of treated fabrics exhibits improved colour yield and high wash fastness.

• Textile Coloration and Finishing
• /
• v.15 no.6
• /
• pp.47-54
• /
• 2003

To be dyed with cationic Berberine, the cotton fiber was modified with reactive anionic agent. The Berberine, a natural cationic colorant of pure yellow, is the major component of Amur Cork tree extract and also can be employed as a natural antimicrobial agent due to its characteristic of cationic quaternary ammonium salt. By LC/MS analysis, it became obvious that the Berberine was contained in Amur Cork tree extract as a major color component. The adsorption of the Berberine on the cotton fabrics pretreated with the anionic agent was greatly increased comparing to that of untreated fabric. Because the anionic agent was colorless, it did not cause unintended color change of the dyeings. The dyed fabric with the Berberine has strong antimicrobial activity showing 99.5% of reduction of bacteria against Staphylococcu aureus.

• Fashion & Textile Research Journal
• /
• v.21 no.3
• /
• pp.356-362
• /
• 2019

This study investigated the substantivity of anionic dyes for cationic-modified new rayon (cocell) fabric treated with cationic agent (CA), 3-(Chloro-2-hydroxypropyl)-trimethylammonium chloride (CA). We also investigate the dyeability of cationic-modified new rayon fabric after dyeing with gallut. CA was converted in an aqueous solution of sodium hydroxide into epoxypropyl trimethylammonium chloride. Treating with this epoxy reagent modified the hydroxyl groups of the new rayon fabric into the trimethylammonium group through ether linkage. The introduction of new cationic sites into new rayon fabric by pretreating with cationic agent improved the substantivity of the Gallnut dye with the new rayon dyebath. The degree of the cationization of cationic-modified new rayon and cotton fabric was evaluated by nitrogen (N) content. This study extracted the colorant of gallnut with hot water at $90^{\circ}C$ and 120 min. Cationic-modified new rayon fabric dyed with extracted solution from gallnut according to concentration of gallnut, dyeing temperature, dyeing time and concentration of cationic agent. Dyeability (K/S) was obtained by CCM observation after dyeing with gallut solution. In addition, fastness to washing and light were also investigated. The degree of crystallinity of new rayon and cotton fabric were 42.15% and 54.94%, respectively. N (%) content of cationic-modified new rayon was higher than the cationic-modified cotton. Dyeability (K/S) increased significantly with the increasing concentration of CA and gallut.